LTC3880EUJ Demo Board (DCR) | VIN Range: 6.5V to 24V, VOUT0 = 0.5V to 4V @ 20A, VOUT1 = 0.5V to 5V @ 20A, PMBus Controlled, Works with DC1613A
Analog Devices Inc.Demonstration circuit 1590B is a dual output synchronous buck converter featuring the LTC3880EUJ, a dual output peak current mode controller with digital power system management. There are two versions of the board available: DC1590B-A senses the output current across a sense resistor and has a default switching frequency of 350kHz, and DC1590B-B senses output current with the inductor DCR and has a default switching frequency of 425kHz. Either version can be populated with the LTC3880EUJ-1 (which allows the user to provide bias power to the IC from an external power supply) instead of the LTC3880EUJ. These boards provide two programmable outputs of 20A each. The factory default settings are 1.8V for each output.
LTC2635-LMO12 | 12-Bit Quad I2C DAC (2.5V Internal Reference Mode, Reset to Hi-Z), Requires DC590
Analog Devices Inc.DC1593A-B: Demo Board for the LTC2635-12 Quad 12-Bit I2C VOUT DACs with 10ppm/°C Reference.
DC1596A
Analog Devices Inc.The LTC3607 is a 15V dual 600mA monolithic synchronous step-down regulator which has only 55?A quiescent current. Intended for a variety of applications, including dual lithium-ion battery products, it operates from a wide 4.5V to 15V input voltage range. It features a constant 2.25MHz switching frequency, enabling the use of tiny, low cost capacitors and inductors 1mm or less in height. Each output voltage is adjustable from 0.6V to VIN. The internal synchronous power switches provide high efficiency without the need for external Schottky diodes.A user selectable mode input is provided to allow the user to trade off ripple noise for light load efficiency; Burst Mode operation provides the highest efficiency at light loads, while pulse-skipping mode provides the lowest ripple noise.To further the maximize battery run time, the P-channel MOSFETs are turned on continuously in dropout (100% duty cycle). In shutdown, the device draws
LT1425CS | Isolated Flyback Converter, 5V to 15V Input, ±5V Output at 220 mA
Analog Devices Inc.DC159A-A: Demo Board for the LT1425 Isolated Flyback Switching Regulators.
TAS2560 5.6W Class-D Audio Amplifier Evaluation Module
Texas InstrumentsTAS2560 5.6W Class-D Audio Amplifier Evaluation Module
ISL78268EVAL1Z
Renesas Electronics CorporationEvaluation Board for the 55V Synchronous Buck Controller w/ 3A Driver
DRV5011 and DRV5012 Ultra-Low Power; Digital-Latch Hall Effect Sensor Evaluation Module
Texas InstrumentsDRV5011 and DRV5012 Ultra-Low Power; Digital-Latch Hall Effect Sensor Evaluation Module
TPSM84824 4.5V to 17V Input; 0.6V to 10V Output; 8A Power Module Evaluation Board
Texas InstrumentsTPSM84824 4.5V to 17V Input; 0.6V to 10V Output; 8A Power Module Evaluation Board
SimpleLink™ Multi-Band CC1352P Wireless MCU LaunchPad™ Development Kit
Texas InstrumentsThe CC1352P device is a true multi band wireless MCU supporting long range applications with the industry’s lowest power integrated +20 dBm power amplifier (PA). The CC1352P enables concurrent operation at both 2.4 GHz and Sub-1 GHz frequencies with PA support determined by external RF matching components.
To kick start your development, we offer two LAUNCHXL-CC1352P LaunchPads with optimized external RF components, one for Sub-1GHz PA and another for 2.4GHz PA wireless operations:
LAUNCHXL-CC1352P1:
Sub-1 GHz operation at 868 MHz / 915 MHz up to 20 dBm
2.4 GHz operation up to 5 dBm
LAUNCHXL-CC1352P-2:
Sub-1 GHz operation at 868 MHz / 915 MHz up to +14 dBm
2.4 GHz operation up to +18 dBm (For Europe, 2.4 GHz operation is certified up to +10 dBm)
The CC1352P device is part of the SimpleLink™ microcontroller (MCU) platform which consists of Wi-Fi®, Bluetooth® low energy, Sub-1 GHz and host MCUs, which all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set.
Features:
LaunchPad with multiband radio supporting concurrent 2.4 GHz and sub-1 GHz operation
Broad band antenna support for Sub-1 GHz (868 MHz / 915 MHz) and 2.4 GHz frequency bands
On-board emulator gets you started with instant code development
All IOs accessible on pin headers compatible with the LaunchPad/BoosterPack eco system
What's included:
LaunchPad Board
Micro USB Cable
Quick Start Guide
LMK05028 Network Clock Generator and Synchronizer Evaluation Module
Texas InstrumentsLMK05028 Network Clock Generator and Synchronizer Evaluation Module
ADS54RF63_ADX4
Texas InstrumentsData Conversion IC Development Tools 2.2GSPS Interleaved ADC Eval Mod
