Search results
Search the entire Electronics Datasheets database for parts, reference designs, application notes and evaluation kits.
| Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 | |
|---|---|---|---|---|---|---|---|---|---|---|
| DigiKey | 563-1857-ND | 113 | 1 | $8.20 | $7.37 | $6.72 | $6.46 | $5.40 | $5.40 | Buy |
The ADC10D1500 is a Low-Power, 10-Bit, Dual 1.5 GSPS or Single 3.0 GSPS AD Converter Reference Board
Texas Instruments
The ADC10D1500 is a Low-Power, 10-Bit, Dual 1.5 GSPS or Single 3.0 GSPS AD Converter Reference Board
Texas Instruments
The ADC10D1500 is a Low-Power, 10-Bit, Dual 1.5 GSPS or Single 3.0 GSPS AD Converter Reference Board
Interfacing a CMOS Sensor to the TMS320DM642 Using Raw Capture Mode (Rev. A)
Texas Instruments
Interfacing a CMOS Sensor to the TMS320DM642 Using Raw Capture Mode (Rev. A)
Texas Instruments
This document contains information on how to interface the TMS320DM642 to a CMOS Digital Image Sensor in raw capture mode. A complete example is shown including hardware and software interfaces. The software consists of a set of routines that are compatible with the Video Port Mini-Driver and External Device Control interface. The discussed interface is proven and has been tested from 320x240 at
DN102 -- SoC Temperature Sensor (Rev. A)
Texas Instruments
DN102 -- SoC Temperature Sensor (Rev. A)
Texas Instruments
This design note includes descriptions and a code example for easily measuring the temperature of a device by using the internal temperature sensor connected to the ADC. The code is suitable for the CC1110 CC1111 CC2430 CC2431 CC2510 and CC2511 system on chip (SOC) devices.
Input Impedance Measurement Using ADC FFT Data
Texas Instruments
Input Impedance Measurement Using ADC FFT Data
Texas Instruments
Texas Instruments has introduced a family of high-speed analog-to-digital converters (ADCs) suited tomeet the demand for high-speed and high-IF sampling systems. To achieve the highest overall system performance an analog front-end circuit with an antialiasing filter must drive the ADC with the highestpossible dynamic range and lowest distortions. One important parameter of the front-end circ
MTA16ATF4G64AZ-3G2F1
Micron Technology, Inc
From $131.12 • 100+ units available from multiple sources
| Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 | |
|---|---|---|---|---|---|---|---|---|---|---|
| DigiKey | 557-MTA16ATF4G64AZ-3G2F1-ND | 0 | 100 | $724.80 | $724.80 | $724.80 | Buy | |||
| AVNET Express | MTA16ATF4G64AZ-3G2F1 | 0 | 100 | $0.00 | $0.00 | $0.00 | Buy | |||
| element14 APAC | MTA16ATF4G64AZ-3G2F1 | 96 | 100 | $1,286.28 | $1,286.28 | $1,286.28 | Buy | |||
| AVNET Europe | MTA16ATF4G64AZ-3G2F1 | 10 | 100 | $168.06 | $131.12 | $131.12 | Buy | |||
| AVNET Asia Pacific | MTA16ATF4G64AZ-3G2F1 | 0 | 100 | Buy |
High Efficiency 5V@1.5A Adapter (meets DOE-VI standard) using BJT Solution
Texas Instruments
High Efficiency 5V@1.5A Adapter (meets DOE-VI standard) using BJT Solution
Texas Instruments
This reference design demostrates a low cost single PCB board solution for 5V1.5A adapter. By using primary side regulation (PSR) mode chip UCC28720 which drives bipolar power device: average efficiency >80% @230Vac is achieved. Output ripple 4.32V with 0~0.5A load transient. The overall size is limited in 43mm(L)X28mm(W)x16mm(H) and no load power is less than 20mW.
LCCA30156-FT2
L-com
RF COAX CABLE, SMA PLUG-SMA PLUG, 2FT; Connector to Connector:SMA Plug to SMA Plug; Coaxial Cable Type:LMR-195; Impedance:50ohm; Cable Length - Imperial:2ft; Cable Length - Metric:609.6mm; Jacket Color:Black
| Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 | |
|---|---|---|---|---|---|---|---|---|---|---|
| DigiKey | 5073-LCCA30156-FT2-ND | 0 | 1 | $72.41 | $72.41 | $72.41 | $72.41 | $72.41 | $72.41 | Buy |
| element14 APAC | LCCA30156-FT2 | 2 | 1 | $103.37 | $98.28 | $94.64 | $94.64 | $94.64 | $94.64 | Buy |
| Newark | LCCA30156-FT2 | 2 | 1 | $11.11 | $11.11 | $11.11 | $11.11 | $11.11 | $11.11 | Buy |
| Farnell | LCCA30156-FT2 | 2 | 1 | $72.73 | $72.73 | $72.73 | $72.73 | $72.73 | $72.73 | Buy |
TLK100 Ethernet PHY Transformerless Operation
Texas Instruments
TLK100 Ethernet PHY Transformerless Operation
Texas Instruments
The TLK100 is a single-port Ethernet PHY for 10BaseT and 100Base TX signaling. This application report describes a method for using Texas Instruments Ethernet PHY products without a transformer. A transformerless mode has great benefit in the following scenarios: nontypical applications that are sensitive to cost; short-distance PCB connections (compromises cable reach); and industrial temperatur
Automotive Buck Conv for High-temp Ambient (105 deg) Providing 15V @ 160mA Reference Design
Texas Instruments
Automotive Buck Conv for High-temp Ambient (105 deg) Providing 15V @ 160mA Reference Design
Texas Instruments
This design is a buck converter for automotive applications covering an input voltage range of 30..60V. It provides an output voltage of 15.0V @ 160mA and can operate up to 105 deg ambient temperature.
CUS100ME-15/A
TDK Lambda
From $53.62 • 54 units available from multiple sources
CUS100ME-15/A
TDK Lambda
TDK-Lambda Embedded Switch Mode Power Supply SMPS, 15V dc, 6.66A, 100W Enclosed, Series: CUS100ME, Input Voltage: 85 → 264V ac, Mounting Type: Chassis Mount, Length: 116mm, Width: 64mm, Depth: 39.7mm, Weight: 255g, Efficiency: 94%, Maximum Temperature: +85°C, Medical Approved: Yes, MPN: CUS100ME-15/A
| Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 | |
|---|---|---|---|---|---|---|---|---|---|---|
| DigiKey | 285-CUS100ME-15/A-ND | 44 | $70.90 | $70.90 | $68.13 | $68.13 | $68.13 | $68.13 | Buy | |
| element14 APAC | CUS100ME-15/A | 3 | 1 | $111.62 | $111.62 | $111.62 | $111.62 | $111.62 | $111.62 | Buy |
| Newark | CUS100ME-15/A | 4 | 1 | $105.86 | $105.86 | $103.09 | $103.09 | $103.09 | $103.09 | Buy |
| Farnell | CUS100ME-15/A | 3 | 1 | $57.04 | $54.76 | $53.62 | $53.62 | $53.62 | $53.62 | Buy |
| RS Components | CUS100ME-15/A | 0 | Buy |
Adding Hysteresis to Low-Battery Input on the TPS6211x
Texas Instruments
Adding Hysteresis to Low-Battery Input on the TPS6211x
Texas Instruments
The low-battery input (LBI) available on several step-down converters is often used to shut down the converter when the input voltage falls below a set threshold. This prevents damage to the battery and signals that the battery is at the end of its life and must be charged or replaced. Batteries have internal resistance that causes the voltage to drop as the load increases. This internal resista
