3.75 kV, 6-Channel, SPIsolator Digital Isolator for SPI with Delay Clock Features: Supports up to 40 MHz SPI clock speed in delay clock mode Supports up to 17 MHz SPI clock speed in 4-wire mode 4 high speed, low propagation delay, SPI signal isolation channels 2 data channels at 250 kbps Delayed compensation clock line 20-lead SSOP with 5.1 mm creepage High temperature operation: 125°C High common-mode transient immunity: >25 kV/μs Safety and regulatory approvals UL recognition per UL 1577 3750 V rms for 1 minute CSA Component Acceptance Notice 5A VDE certificate of conformity DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 565 V peak

3.75 kV RMS Digital Isolators for Isolated USB 2.0 High, Full, and Low Speed Features: USB 2.0 signaling with automatic detection of low, full, and high speed connections 1.5 Mbps, 12 Mbps, and 480 Mbps data rates Bidirectional USB isolator for upstream and downstream ports Redriving and high speed data retiming for input jitter removal and an open eye Flexible clock input options 4.5 V to 5.5 V VBUSx or 3 V to 3.6V operation on each side 21 mA typical idle, low or full speed mode supply current 48 mA typical idle, high speed mode supply current Ultra low power standby in USB 2.0 suspend (L2) or disconnect 1.7 mA typical low power standby, upstream supply current 20 μA typical low power standby, downstream supply current ±6000 V IEC 61000-4-2 ESD protection across the isolation barrier Passed CISPR32/EN55032 Class B emissions High common-mode transient immunity: 50 kV/μs typical Safety and regulatory approvals (pending) UL (pending): 3750 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (pending) IEC 62368-1, IEC 61010-1, and IEC60601-1 VDE certificate of conformity (pending) DIN V VDE V 0884-11 (VDE V 0884-11):2017-01 VIORM = 849 VPEAK (working voltage) Operating temperature range: −55°C to +125°C Compact 20-lead SSOP with 5.3 mm creepage and clearance

Aerospace High Stability Isolated Error Amplifier Features: Stability in isolated feedback applications 0.7% accuracy over the full temperature range Reference voltage: 1.225 V Compatible with DOSA Low power operation: <7 mA total Bandwidth: 400 kHz Isolation voltage: 500 V rms Wide voltage supply range VDD1: 3 V to 20 V VDD2: 3 V to 20 V Wide temperature range −55°C to +125°C ambient operation 150°C maximum junction temperature

Isolated Switch Regulator with Integrated Feedback Features:Isolated PWM feedback with built in compensationPrimary side transformer driver for up to 2.5 W output power with 5 V input voltageRegulated adjustable output: 3.3 V to 24 VUp to 80% efficiency200 kHz to 1 MHz adjustable oscillatorSoft start function at power-upPulse-by-pulse overcurrent protectionThermal shutdown5000 V rms isolation High common-mode transient immunity: >25 kV/s16-lead SOIC package with 8.3 mm creepageHigh temperature operation: 105C

Isolated, Precision Gate Driver with 2 A Output Features: 2.3 A peak output current (<2 Ω RDSON_x) 2.5 V to 6.5 V VDD1 input 4.5V to 35 V VDD2 output  UVLO at 2.3 V VDD1 Multiple UVLO options on VDD2 Grade A—4.4 V (typical) positive going threshold Grade B—7.3 V (typical) positive going threshold Grade C—11.3 V (typical) positive going threshold Precise timing characteristics  79 ns maximum isolator and driver propagation delay falling edge (ADuM4120) CMOS input logic levels  High common-mode transient immunity: 150 kV/μs High junction temperature operation: 125°C  Default low output Safety and regulatory approvals (pending) UL recognition per UL 1577  5 kV rms for 1 minute SOIC long package CSA Component Acceptance Notice 5A  VDE certificate of conformity (pending) DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 849 V peak  8 mm creepage Wide body, 6-lead SOIC with increased creepage

Single-/Dual-Supply, High Voltage Isolated IGBT Gate Driver Features: 4 A peak drive output capability Output power device resistance < 1Ω Desaturation protection Isolated Fault output Soft Shutdown on Fault Isolated Fault and Ready functions Low propagation delay 55 ns typical Minimum pulse width: 50 ns Operating temperature range: −40°C to +125°C Output voltage range to 35 V See data sheet for additional features

11 A High Voltage Isolated Bipolar Gate Driver with Fault Detection, Miller Clamp Features: 11 A short-circuit source current (0 Ω gate resistance) 9 A short-circuit sink current (0 Ω gate resistance) 4.61 A peak current (2 Ω gate resistance) Output power device resistance: <1 Ω Output voltage range up to 30 V Multiple UVLO options on VDD2 Grade A: 14.5 V (typical) UVLO on VDD2 positive going threshold Grade B and Grade C: 11.5 V (typical) UVLO on VDD2 positive going threshold VDD1 input voltage range from 2.5 V to 6 V Desaturation protection Soft shutdown on desaturation fault Multiple desaturation detect comparator voltages Grade B: 9.2 V (typical) Grade A and Grade C: 3.5 V (typical) Miller clamp output with gate sense input Isolated fault and ready functions Low propagation delay: 75 ns (typical) Operating temperature range: −40°C to +125°C Creepage distance: 8.3 mm minimum CMTI: 100 kV/μs Safety and regulatory approvals (pending) 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A DIN V VDE V 0884-11 VIORM = 2150 V peak

30 A Isolated SiC Gate Driver with Slew Rate Control and SPI Features: 30 A peak short circuit (typ) drive output 20 A peak drive current (typ) in typical application Output power device resistance < 0.4Ω 1500 V peak and dc working voltage to DIN V VDE 0884-11 Slew rate control via SPI interface Low propagation delay (140 ns typ) 60 ns Minimum Pulse Width Bi-polar and Uni-polar secondary side supply capability VDD1: 4.4 V to 7 V VDD2-GND2: 12 V to 24 V GND2-VSS2: 0 V to -5.5 V Protection Features: DESAT – SiC drain sense, 7 V (typ) threshold Programmable internal DESAT blanking time ASC pin, secondary side driver turn-on control, 8 V (typ) threshold External Miller Clamp Soft-shutdown, 1 μs capability, adjustable with external resistor VDD2-VSS2 OVP and programmable VDD2-VSS2 UVP GND2-VSS2 OVP and UVP Isolated Fault differentiation through fault reporting pins SiC Switch Isolated Temperature Sense 1 kHz PWM, and SPI register read Temperature sense diode stack Compatible with NTC using external resistor network SPI Interface Non-volatile EEPROM registers for configurability Fault reporting information Operating junction temperature range (-40 to 150ºC)

Robust 2.5 kV rms Quad-Channel Isolator with Integrated DC-to-DC Converter & 1 Reverse Channel Features: isoPower integrated, isolated dc-to-dc converter Up to 150 mW output power Quad dc to 150 Mbps signal isolation channels 24-lead SSOP package with 5.3 mm minimum creepage High temperature operation: 105°C High common-mode transient immunity: 100 kV/μs Safety and regulatory approvals UL recognition (pending) – 2500 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (pending) VDE certificate of conformity (pending) – DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 – VIORM = 565 V peak

Robust 2.5 kV rms Quad-Channel Isolator with Integrated DC-to-DC Converter & 1 Reverse Channel Features: isoPower integrated, isolated dc-to-dc converter Up to 150 mW output power Quad dc to 150 Mbps signal isolation channels 24-lead SSOP package with 5.3 mm minimum creepage High temperature operation: 105°C High common-mode transient immunity: 100 kV/μs Safety and regulatory approvals UL recognition (pending) – 2500 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (pending) VDE certificate of conformity (pending) – DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 – VIORM = 565 V peak

Quad-Channel Isolators with Integrated DC-to-DC Converter (3:1 directionality) Features: isoPower integrated, isolated dc-to-dc converter 100 mA output supply AEC-Q100 qualified for automotive applications ADuM6421AW (ADuM6423AW pending) Meets CISPR 32/EN55032 Class B emission limits up to 5 Mbps at a full load on a 2-layer PCB Quad dc to 100 Mbps signal isolation channels 28-lead, fine pitch, SOIC with 8.3 mm minimum creepage High temperature operation: 125°C maximum High common-mode transient immunity: 100 kV/μs Safety and regulatory approvals (pending) UL recognition (pending) 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (pending) VDE V 0884-11 certificate of conformity (pending) VIORM = 566 V peak CQC certification per GB4943.1-2011 (pending)

Chip Scale NTSC/PAL Video Encoder with Macrovision Copy Protection Features: 3 x 10-bit DACs for High Performance Video Output Compact 6mm x 6mm 40-lead Package Using CSP Technology Advanced Power Management for Power-Sensitive Applications 8-bit CCIR-656 Input Port for Digital Video Data Programmable Output Options for Composite, S-Video & Component Video Formats Industrial Temperature Range  Available (ADV7174BCP)

10-Bit, 4 Oversampled SDTV Video Decoder with Deinterlacer Features: Worldwide NTSC/PAL/SECAM color demodulation support One 10-bit ADC, 4× oversampling per channel for CVBS, Y/C, and YPrPb modes Analog video input channels with on-chip antialiasing filter ADV7280A: up to 4 input channels ADV7280A-M: up to 8 input channels Video input support for CVBS (composite), S-Video (Y/C), and YPrPb (component) NTSC/PAL/SECAM autodetection Up to 1.47 V common-mode input range solution Excellent common-mode noise rejection capabilities 5-line adaptive 2D comb filter and CTI video enhancement Integrated AGC with adaptive peak white mode Fast switching capability Integrated I2P video output converter (deinterlacer) ACE Downdither (8-bit to 6-bit) Rovi copy protection detection MIPI CSI-2 output interface (ADV7280A-M) 8-bit ITU-R BT.656 YCrCb 4:2:2 output and HS, VS, or field synchronization (ADV7280A) Full featured VBI data slicer with WST support Power-down mode available 2-wire, I2C-compatible serial interface Qualified for automotive applications −40°C to +105°C temperature grade 32-lead, 5 mm × 5 mm, RoHS compliant LFCSP

10-Bit, 4 Oversampled SDTV Video Decoder with Deinterlacer Features: Worldwide NTSC/PAL/SECAM color demodulation support One 10-bit analog-to-digital converter (ADC), 4× oversampling per channel for CVBS, Y/C, and YPrPb modes Analog video input channels with on-chip antialiasing filter ADV7280: up to 4 input channels ADV7280-M: up to 8 input channels Video input support for CVBS (composite), Y/C (S-Video), and YPrPb (component) NTSC/PAL/SECAM autodetection Up to 1.47 V common-mode input range solution Excellent common-mode noise rejection capabilities 5-line adaptive 2D comb filter and CTI/DNR video enhancement Adaptive Digital Line Length Tracking (ADLLT), signal processing, and enhanced FIFO management provide mini-time base correction (TBC) functionality See data sheet for additional features

10-Bit, 4 Oversampled SDTV Video Decoder Decoder with Differential Inputs Features: Worldwide NTSC/PAL/SECAM color demodulation support One 10-bit analog-to-digital converter (ADC), 4× oversampling per channel for CVBS, Y/C, and YPrPb modes Analog video input channels with on-chip antialiasing filter ADV7281: up to 4 input channels ADV7281-M: up to 6 input channels ADV7281-MA: up to 8 input channels Video input support for CVBS (composite), Y/C (S-Video), and YPrPb (component) Short-to-battery (STB) diagnostics on 2 video inputs (ADV7281 and ADV7281-M only) Up to 4 V common-mode input range solution Excellent common-mode noise rejection capabilities 5-line adaptive 2D comb filter and CTI/DNR video enhancement Adaptive Digital Line Length Tracking (ADLLT), signal processing, and enhanced FIFO management provide mini-time base correction (TBC) functionality See data sheet for additional features

10-Bit, 4 Oversampled SDTV Video Decoder Decoder with Differential Inputs Features: Worldwide NTSC/PAL/SECAM color demodulation support One 10-bit analog-to-digital converter (ADC), 4× oversampling per channel for CVBS, Y/C, and YPrPb modes Analog video input channels with on-chip antialiasing filter ADV7281: up to 4 input channels ADV7281-M: up to 6 input channels ADV7281-MA: up to 8 input channels Video input support for CVBS (composite), Y/C (S-Video), and YPrPb (component) Short-to-battery (STB) diagnostics on 2 video inputs (ADV7281 and ADV7281-M only) Up to 4 V common-mode input range solution Excellent common-mode noise rejection capabilities 5-line adaptive 2D comb filter and CTI/DNR video enhancement Adaptive Digital Line Length Tracking (ADLLT), signal processing, and enhanced FIFO management provide mini-time base correction (TBC) functionality See data sheet for additional features

Low Power, 165 MHz HDMI Receiver Features: High-Definition Multimedia Interface (HDMI®) All mandatory and additional 3D video formats supported CEC 1.4-compatible HDMI receiver 165 MHz maximum transition-minimized differential signaling (TMDS) clock frequency 24-bit output pixel bus Audio support S/PDIF (IEC 60958-compatible) digital audio HDMI audio extraction support Advanced audio mute feature I2S, 4 streams for 8 channels General Interrupt controller with two interrupt outputs Standard identification (STDI) circuit Highly flexible 24-bit pixel output interface Internal extended display identification data (EDID) RAM Any-to-any 3 × 3 color space conversion (CSC) matrix 2-layer printed circuit board (PCB) design supported 76-ball, 6 mm × 6 mm, chip-scale package BGA See data sheet for additional features

12-bit Deep Color Quad HDMI Receiver Features: 225 MHz HDMI receiver HDMI repeater support High-bandwidth digital content protection (HDCP 1.3) Programmable/adaptive equalizer for cable lengths up to 30 meters High-bandwidth digital content protection (HDCP 1.3) Internal EDID RAM EDID with HDMI cable power support See datasheet for additional features

40 Gbps HDMI 2:2 Crosspoint Transceiver Features:2-input and 2-output crosspoint HDMI transceiver 8k30 RGB/YCbCr 4:4:4 or 4k120 RGB/YCbCr 4:4:4 10-bit video support 8k60 YCbCr 4:2:0 10-bit video supportHDMI receivers Up to 40 Gbps FRL support Up to 18 Gbps TMDS video support eARC transmitter EDID access in low power standby mode EDID SRAM managed by internal MCU host processor Fast switching between portsHDMI transmitters Up to 40 Gbps FRL support Up to 18 Gbps TMDS video support eARC receiverHDCP HDCP 1.4, HDCP 2.2, and HDCP 2.3 support Independent HDCP on each transmitter and receiver port Fully integrated HDCP 1.4, HDCP 2.2, and HDCP 2.3 repeater modes On-chip key storage in OTPAudio 2 independently configurable audio ports 8-channel, 192 kHz, 24-bit PCM audio support 24.576 Mb IEC61937 compressed audio support eARC receiver or transmitter with multichannel PCM, HBR audio, and ARC supportVideo Crosspoint matrix switch, video mirror, video split, and video merge modes FRL to TMDS and TMDS to FRL modes conversion Variable refresh rate (VRR), fast vactive (FVA), and auto low latency mode (ALLM) support Dual path color space conversion Dynamic HDR passthrough support including HDMI dynamic HDR metadata, HDR10+, and Dolby Vision™ DSC 1.2a passthrough Video test pattern generator

Dual HDMI 1.4 Fast Switching Receiver with 12-Bit, 170 MHz Video and Graphics Digitizer and 3D Comb Filter Decoder Features: Dual HDMI 1.4 fast switching receiver 170 MHz video and graphics digitizer 3D comb filter video decoder SCART fast blank support Adaptive HDMI equalizer Integrated CEC controller HDMI repeater support Advanced VBI data slicer 256-ball, 17 mm × 17 mm BGA package 2:1 HDMI 1.4 225 MHz receiver Xpressview™ fast switching of HDMI ports See data sheet for additional features