Digital Potentiometer ICs 128tap, Dual DigiPOT, NVM, I2C

Dual 2 MHz, 800 mA, Synchronous, Low Quiescent Current Buck Regulator Features: Input voltage range: 2.3 V to 6.5 V Fixed and adjustable output voltage options Fixed output voltage pair options: 1.2 V/1.8 V, 1.2 V/3.3 V, 1.8 V/3.3 V Adjustable output voltage range: 0.8 V to 6 V Minimum guaranteed continuous output current: 800 mA Up to 94% efficiency Low quiescent current of 15 µA for both channels in power saving mode (PSM) Low shutdown current: 0.1 μA (typical) 100% duty cycle for low dropout operation See datasheet for additional features

Precision Amplifiers DUAL High Performance ZCO Op Amp

Single Supply, High Speed, Rail-to-Rail Output, Triple Op Amp Features:Voltage feedback architectureRail-to-rail output swing: 0.1 V to 4.9 VHigh speed amplifiers 410 MHz, 3 dB bandwidth, G = 1 210 MHz, 3 dB bandwidth, G = 2 Slew rate: 870 V/s 53 MHz, 0.1 dB large signal flatness 5.3 ns settling time to 0.1% with 2 V stepHigh input common-mode voltage range VS 0.2 V to +VS 1 VSupply range: 3 V to 5.5 VDifferential gain error: 0.01%Differential phase error: 0.01Low power 7.8 mA/amplifier typical supply current Power-down featureAvailable in 16-lead LFCSP

High Speed Operational Amplifiers Low Cost Current Feedback RR Single

ADC, Flash Method, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, BICMOS, CDIP24

ISOLATION AMPLIFIER 400KHZ 5KV SOIC-16 FULL REEL; No. of Amplifiers:1 Amplifier; Input Offset Voltage:-; Isolation Voltage:5kV; Supply Voltage Range:3V to 20V; Amplifier Case Style:SOIC; No. of Pins:16Pins; Bandwidth:400kHz ;RoHS Compliant: Yes

High Accuracy Ultralow Quiescent Current, 1A, anyCAP Dropout Regulator Features: High Accuracy Over Line and Load: ±0.8% @ 25°C, ±1.4% Over Temperature Ultralow Dropout Voltage: 190 mV (Typ) @ 1 A Requires Only CO = 1 µF for Stability anyCAP = Stable with Any Type of Capacitor (Including MLCC) Current and Thermal Limiting Low Noise 2.7 V to 8 V Supply Range –40°C to +85°C Ambient Temperature Range SOT-223 Package

20 V, 200 mA, Low Noise, CMOS LDO Linear Regulator Features: Low noise: 11 μV rms independent of fixed output voltage PSRR of 88 dB at 10 kHz, 68 dB at 100 kHz, 50 dB at 1 MHz, VOUT ≤ 5 V, VIN = 7 V Input voltage range: 2.7 V to 20 V Maximum output current: 200 mA Initial accuracy: ±0.8% Accuracy over line, load, and temperature −1.2% to +1.5%, TJ = −40°C to +85°C ±1.8%, TJ = −40°C to +125°C Low dropout voltage: 200 mV (typical) at a 200 mA load,  VOUT = 5 V User programmable soft start (LFCSP and SOIC only) Low quiescent current, IGND = 50 μA (typical) with no load Low shutdown current: 1.8 μA at VIN = 5 V, 3.0 μA at VIN = 20 V Stable with a small 2.2 μF ceramic output capacitor Fixed output voltage options: 1.8 V, 2.5 V, 3.3 V, 4.5 V, and 5.0 V 16 standard voltages between 1.2 V and 5.0 V are available Adjustable output from 1.2 V to VIN – VDO, output can be adjusted above initial set point Precision enable 2 mm × 2 mm, 6-lead LFCSP, 8-Lead SOIC, 5-Lead TSOT AEC-Q100 qualified for automotive applications

DIGITAL TO ANALOG CONVERTER DAC 12 BIT DIP-16; Resolution (Bits):12bit; Sampling Rate:-; Input Channel Type:Parallel; Supply Voltage Range:4.75V to 5.25V; ADC / DAC Case Style:DIP; No. of Pins:16; Data Interface:Parallel; DNL :1LSB;RoHS Compliant: Yes

RF Amplifier InGaP HBT Driver amp SMT, 3.0 - 4.5 GHz

Dual 100mA/500mA Low Dropout, Low Noise, Micropower Regulators with Independent Inputs Features: Low Noise: 20µVRMS (10Hz to 100kHz) Low Quiescent Current: 30µA/Output Independent Inputs Wide Input Voltage Range: 1.8V to 20V Output Current: 100mA/500mA Very Low Shutdown Current: <0.1µA Low Dropout Voltage: 300mV/320mV at 100mA/500mA Adjustable Outputs from 1.22V to 20V Stable with as Low as 1µF/3.3µF Output Capacitor Stable with Aluminum, Tantalum or Ceramic Capacitors Reverse-Battery Protected No Protection Diodes Needed Overcurrent and Overtemperature Protected Tracking/Sequencing Capability Thermally Enhanced 16-Lead TSSOP and 16-Lead (5mm × 3mm) DFN Packages

High Performance, 4-Channel, Fault-Protected Analog Multiplexer Features: All switches off with power supply off Analog Output of ON Channel Clamped within Power Supplies If an Overvoltage Occurs Latch-up proof construction Fault and Overvoltage Protection (-40 V + 55 V) Fast switching times: ton 250 ns max toff 150 ns max Break-before-make construction TTL and CMOS Compatible inputs 16-Lead DIP/SOIC Packages