Precision 5 Volt Reference Features: Very Low Drift: 2ppm/°C Max TC Pin Compatible with LT1021-5, REF-02, (PDIP Packages) Output Sources 15mA, Sinks 10mA Excellent Transient Response Suitable for A-to-D Reference Inputs Noise Reduction Pin Excellent Long Term Stability Less Than 1ppm P-P Noise (0.1Hz to 10Hz)

Precision 5 Volt Reference Features: Very Low Drift: 2ppm/°C Max TC Pin Compatible with LT1021-5, REF-02, (PDIP Packages) Output Sources 15mA, Sinks 10mA Excellent Transient Response Suitable for A-to-D Reference Inputs Noise Reduction Pin Excellent Long Term Stability Less Than 1ppm P-P Noise (0.1Hz to 10Hz)

Quad Low Power Line Driver Features: Low Operating Voltage: ±5V to ±15V 500µA Supply Current Zero Supply Current when Shut Down Outputs Can Be Driven ±30V Thermal Limiting Output “Open” when Off (Three-State) 10mA Output Drive Pinout Similar to 1488

Micropower Dual Reference Features: Guaranteed 20 ppm/°C Drift 1.2V 1% Initial Tolerance 20µA to 20mA Operation (1.2V) 1 Dynamic Impedance 7V, 100µA Reference

Micropower Dual Reference Features: Guaranteed 20 ppm/°C Drift 1.2V 1% Initial Tolerance 20µA to 20mA Operation (1.2V) 1 Dynamic Impedance 7V, 100µA Reference

Micropower Dual Reference Features: Guaranteed 20 ppm/°C Drift 1.2V 1% Initial Tolerance 20µA to 20mA Operation (1.2V) 1 Dynamic Impedance 7V, 100µA Reference

Micropower Dual Reference Features: Guaranteed 20 ppm/°C Drift 1.2V 1% Initial Tolerance 20µA to 20mA Operation (1.2V) 1 Dynamic Impedance 7V, 100µA Reference

Micropower Dual Reference Features: Guaranteed 20 ppm/°C Drift 1.2V 1% Initial Tolerance 20µA to 20mA Operation (1.2V) 1 Dynamic Impedance 7V, 100µA Reference

Switched-Capacitor Voltage Converter with Regulator Features: Output Current 100mA (LT1054) 125mA (LT1054L) Reference and Error Amplifier for Regulation Low Loss: 1.1V at 100mA Operating Range 3.5V to 15V (LT1054) 3.5V to 7V (LT1054L) External Shutdown External Oscillator Synchronization Can Be Paralleled Pin Compatible with the LTC1044/ICL7660 Available in SW16 and SO-8 Packages

Switched-Capacitor Voltage Converter with Regulator Features: Output Current 100mA (LT1054) 125mA (LT1054L) Reference and Error Amplifier for Regulation Low Loss: 1.1V at 100mA Operating Range 3.5V to 15V (LT1054) 3.5V to 7V (LT1054L) External Shutdown External Oscillator Synchronization Can Be Paralleled Pin Compatible with the LTC1044/ICL7660 Available in SW16 and SO-8 Packages

Precision, High Speed, JFET Input Operational Amplifiers Features: Guaranteed Offset Voltage 150µV Max -55°C to 125°C 500µV Max Guaranteed Drift 4µV/°C Max Guaranteed Bias Current 70°C : 150pA Max 125°C : 2.5nA Max Guaranteed Slew Rate 12V/µs Min Available in 8-Pin PDIP and SO Packages

Precision, High Speed, JFET Input Operational Amplifiers Features: Guaranteed Offset Voltage 150µV Max -55°C to 125°C 500µV Max Guaranteed Drift 4µV/°C Max Guaranteed Bias Current 70°C : 150pA Max 125°C : 2.5nA Max Guaranteed Slew Rate 12V/µs Min Available in 8-Pin PDIP and SO Packages

Dual and Quad, JFET Input Precision High Speed Op Amps Features: 14V/µs Slew Rate: 10V/µs Min. 5MHz Gain-Bandwidth Product Fast Settling Time: 1.3µs to 0.02% 150µV Offset Voltage (LT1057): 450µV Max. 180µV Offset Voltage (LT1058): 600µV Max. 2µV/°C VOS Drift: 7µV/°C Max. 50pA Bias Current at 70°C Low Voltage Noise: 13nV/√Hz at 1kHz 26nV/√Hz at 10Hz

1.25A High Efficiency Switching Regulator Features: Available in MiniDIP, TO-220, and TO-3 Packages Wide Input Voltage Range: 3V to 60V Low Quiescent Current: 6mA Internal 1.25A Switch Very Few External Parts Required Self-Protected Against Overloads Operates in Nearly All Switching Topologies Shutdown Mode Draws Only 50µA Supply Current Flyback-Regulated Mode has Fully Floating Outputs Can be Externally Synchronized

1.25A High Efficiency Switching Regulator Features: Available in MiniDIP, TO-220, and TO-3 Packages Wide Input Voltage Range: 3V to 60V Low Quiescent Current: 6mA Internal 1.25A Switch Very Few External Parts Required Self-Protected Against Overloads Operates in Nearly All Switching Topologies Shutdown Mode Draws Only 50µA Supply Current Flyback-Regulated Mode has Fully Floating Outputs Can be Externally Synchronized

1.25A High Efficiency Switching Regulator Features: Available in MiniDIP, TO-220, and TO-3 Packages Wide Input Voltage Range: 3V to 60V Low Quiescent Current: 6mA Internal 1.25A Switch Very Few External Parts Required Self-Protected Against Overloads Operates in Nearly All Switching Topologies Shutdown Mode Draws Only 50µA Supply Current Flyback-Regulated Mode has Fully Floating Outputs Can be Externally Synchronized

Micropower DC-DC Converter Adjustable and Fixed 5V, 12V Features: No Design Required Operates at Supply Voltages From 1.0V to 30V Consumes Only 95µA Supply Current Works in Step-Up or Step-Down Mode Only Three External Off-the-Shelf Components Required Low-Battery Detector Comparator On-Chip User-Adjustable Current Limit Internal 1A Power Switch Fixed or Adjustable Output Voltage Versions Space-Saving 8-Pin MiniDIP or SO8 Package

Micropower DC-DC Converter Adjustable and Fixed 5V, 12V Features: No Design Required Operates at Supply Voltages From 1.0V to 30V Consumes Only 95µA Supply Current Works in Step-Up or Step-Down Mode Only Three External Off-the-Shelf Components Required Low-Battery Detector Comparator On-Chip User-Adjustable Current Limit Internal 1A Power Switch Fixed or Adjustable Output Voltage Versions Space-Saving 8-Pin MiniDIP or SO8 Package

Micropower DC-DC Converter Adjustable and Fixed 5V, 12V Features: No Design Required Operates at Supply Voltages From 1.0V to 30V Consumes Only 95µA Supply Current Works in Step-Up or Step-Down Mode Only Three External Off-the-Shelf Components Required Low-Battery Detector Comparator On-Chip User-Adjustable Current Limit Internal 1A Power Switch Fixed or Adjustable Output Voltage Versions Space-Saving 8-Pin MiniDIP or SO8 Package

Micropower DC-DC Converter Adjustable and Fixed 5V, 12V Features: No Design Required Operates at Supply Voltages From 1.0V to 30V Consumes Only 95µA Supply Current Works in Step-Up or Step-Down Mode Only Three External Off-the-Shelf Components Required Low-Battery Detector Comparator On-Chip User-Adjustable Current Limit Internal 1A Power Switch Fixed or Adjustable Output Voltage Versions Space-Saving 8-Pin MiniDIP or SO8 Package