3 V/5 V, 2 MSPS, 8-Bit, 1-/4-/8-Channel Sampling ADCs Features: 8-bit half-flash ADC with 420 ns conversion time 1, 4 and 8 Single-Ended Analog Input Channels Available with Input Offset Adjust On-Chip Track-and-Hold SNR Performance Given for Input Frequencies Up to 10 MHz Automatic Power-Down at the End of Conversion On-Chip Reference (2.5 V) Wide Operating Supply Range 3 V ± 10% and 5 V ± 10% Input Ranges: 0 V to 2 Vp-p, VDD = 3 V ± 10% 0 V to 2.5 Vp-p, VDD = 5 V ± 10% Flexible Parallel Interface with EOC Pulse to Allow Stand-Alone Operation

Switching Voltage Regulators 725VDC Isolated DC/DC uModule Converter

3 V/5 V, 2 MSPS, 8-Bit, 1-/4-/8-Channel Sampling ADCs Features: 8-bit half-flash ADC with 420 ns conversion time 1, 4 and 8 Single-Ended Analog Input Channels Available with Input Offset Adjust On-Chip Track-and-Hold SNR Performance Given for Input Frequencies Up to 10 MHz Automatic Power-Down at the End of Conversion On-Chip Reference (2.5 V) Wide Operating Supply Range 3 V ± 10% and 5 V ± 10% Input Ranges: 0 V to 2 Vp-p, VDD = 3 V ± 10% 0 V to 2.5 Vp-p, VDD = 5 V ± 10% Flexible Parallel Interface with EOC Pulse to Allow Stand-Alone Operation

LC2MOS Complete, Dual 12-Bit MDAC, (8 + 4) Loading Structure Features: Two 12-Bit MDACs with Output Amplifiers Space-Saving 0.3', 24-Lead DIP and 24-Terminal SOIC Package 4-Quadrant Multiplication Parallel Loading Structure: AD7847 (8+4) Loading Structure: AD7837

Complete 12-Bit CMOS Multiplying DAC Features: 12-Bit CMOS MDAC with Output Amplifier 4-Quadrant Multiplication Low Power LC2MOS Guaranteed Monotonic (Tmin to Tmax) Space-Saving 0.3' DIPS and 24- or 28- Terminal Surface Mount Packages Application Resistors On Chip for Gain Ranging, etc.

Fast, Low-Power, 4-Channel, Simultaneous Sampling, 14-bit ADC Features: Fast (2.4 µs) 14-Bit ADC Four Simultaneously Sampled Inputs Four Track/Hold Amplifiers 0.35 µs Track/Hold Acquisition Time 2.4 µs Conversion Time per Channel HW/SW Select of Channel Sequence for Conversion Single Supply Operation Low Power, 115 mW Typ Selection of Input Ranges: ±10 V, ±5 V and ±2.5 V 0 V to 5 V and 0 V to 2.5 V High Speed Parallel Interface Allows Interfacing to 3 V Processors Power Saving Mode, 15 µW Typ Overvoltage Protection on Analog Inputs

AD7869 - LC2MOS 14-Bit Analog I/O System

CMOS, Complete 14-Bit Sampling ADC with Serial Output Features: Complete monolithic 14-bit ADC Twos complement coding Parallel, byte, and serial digital interface 80 dB SNR at 10 kHz input frequency 57 ns data access time Low power: 50 mW typ 83 kSPS throughput rate

6-Channel AFE Processor for General Purpose Applications Including Industrial Power Metering or Multi-Channel Analog Inputs Features: Six 16-Bit A/D Converters Programmable Input Sample Rate 77 dB ADC SNR 64 kS/s Maximum Sample Rate –83 dB Crosstalk Low Group Delay (25 µs typ per ADC Channel) Programmable Input Gain Flexible Serial Port Allows Multiple Devices To Be Connected in Cascade Single (+2.7 V to +5.5 V) Supply Operation 80 mW Max Power Consumption at 2.7 V On-Chip Reference 28-Pin SOIC and 44-Pin TQFP Packages

10-Bit, 1 MSPS, Low-Power A/D Converter in SC70 and MSOP Packages Features: Fast throughput rate: 1 MSPS Specified for VDD of 2.35 V to 5.25 V Low power 3.6 mW at 1 MSPS with 3 V supplies 12.5 mW at 1 MSPS with 5 V supplies Wide input bandwidth 71 dB SNR at 100 kHz input frequency No pipeline delays Flexible power/serial clock speed management High speed serial interface SPI/QSPI™/MICROWIRE/DSP compatible Standby mode: 1 µA maximum 6-lead SC70 package 8-lead MSOP Qualified for automotive applications

12-Bit, Multiplying IOUT, SERIAL Features: Resolution: 12 Bits Nonlinearity: ±1/2 LSB Tmin to Tmax Low Gain Drift: 2ppm/°C typ, 5ppm/°C max Serial Load on Positive or Negative Strobe Asynchronous CLEAR Input for Initialization Full 4-Quadrant Multiplication Low Multiplying Feedthrough: 1 LSB max @10kHz Requires no Schottky Diode Output Protection Low Power Dissipation: 40 mW max +5V Supply Small Size: 16-pin DIP 20-Terminal Surface Mount Package Low Cost

CMOS 12-Bit Buffered Multiplying DAC With Internal Data Latches Features: Improved Version of AD7545 Fast Interface Timing All Grades 12-Bit Accurate 20-Lead DIP and Surface Mount Packages Low Cost

Multiple Range, 12-Bit, Unipolar, Voltage Output DACs Features: 8 software-programmable output ranges: 0 V to +5 V, 0 V to +10 V, 0 V to +16 V, 0 V to +20 V, ±3 V, ±5 V, ±10 V, −2.5 V to +7.5 V; 5% overrange Total unadjusted error (TUE): 0.1% FSR maximum 16-bit resolution: ±2 LSB maximum INL Guaranteed monotonicity: ±1 LSB maximum Single channel, 12-bit DACs Settling time: 7.5 μs typical Integrated reference buffers Low noise: 35 nV/√Hz Low glitch: 1 nV-sec 1.8 V logic compatibility Asynchronous updating via LDAC Asynchronous RESET to zero scale/midscale DSP/microcontroller-compatible serial interface Robust 4 kV HBM ESD rating Available in 16-lead TSSOP and 16-lead LFCSP Operating temperature range: −40°C to +125°C

Industrial Current/Voltage Output Driver with Programmable Ranges Features: Current output ranges: 4 mA to 21 mA, 0 mA to 21 mA ±0.15% FSR total unadjusted error (TUE) ±5 ppm/°C FSR typical output drift Voltage output ranges: 0 V to 5 V, 0 V to 10.5 V, ±10.5 V ±0.05% FSR total unadjusted error (TUE) ±3 ppm/°C FSR output drift Flexible serial digital interface On-chip output fault detection PEC error checking Asynchronous CLEAR function Flexible power-up condition to 0 V or tristate Power supply range AVDD: +12 V (± 10%) to +24 V (± 10%) AVSS: −12 V (± 10%) to −24 V (± 10%) Output loop compliance to AVDD − 2.75 V Temperature range: −40°C to +105°C 32-lead, 5 mm × 5 mm LFCSP package

AD5800 - Focus/zoom lens driver

12-bit Digital-to-Analog Converters, with Zener Reference Features: Single Chip Construction Very High Speed Settling to 1/2 LSB AD565A: 250 ns max Full-Scale Switching Time: 30 ns Guaranteed for Operation with ±12 V (AD565A) Supplies Low Cost Linearity Guaranteed Over temperature 1/2 LSB max (K, T Grades) Monotonicity Guaranteed Over temperature Low Power = 225mW max Use with On-Board High Stability Reference

Octal, 16-Bit nanoDAC+ with I2C Interface Features: High performance High relative accuracy (INL): ±3 LSB maximum at 16 bits Total unadjusted error (TUE): ±0.14% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.06% of FSR maximum Wide operating ranges −40°C to +125°C temperature range 2.7 V to 5.5 V power supply Easy implementation User selectable gain of 1 or 2 (GAIN pin/bit) 1.8 V logic compatibility I2C-compatible serial interface Robust 2 kV HBM and 1.5 kV FICDM ESD rating 20-lead TSSOP and LFCSP RoHS-compliant packages

Octal, 16-Bit nanoDAC+ with 2 ppm/C Reference, I2CInterface Features: High Performance High relative accuracy (INL): ±3 LSB maximum at 16 bits Total unadjusted error (TUE): ±0.14% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.06% of FSR maximum Low drift 2.5 V reference: 2 ppm/°C typical Wide Operating Ranges −40°C to +125°C temperature range 2.7 V to 5.5 V power supply Easy Implementation User selectable gain of 1 or 2 (GAIN pin/bit) 1.8 V logic compatibility 400 kHz I2C-compatible serial interface 20-lead, RoHS-compliant TSSOP and LFCSP

Octal, 16-Bit nanoDAC+ with 2 ppm/C Reference, I2CInterface Features: High Performance High relative accuracy (INL): ±3 LSB maximum at 16 bits Total unadjusted error (TUE): ±0.14% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.06% of FSR maximum Low drift 2.5 V reference: 2 ppm/°C typical Wide Operating Ranges −40°C to +125°C temperature range 2.7 V to 5.5 V power supply Easy Implementation User selectable gain of 1 or 2 (GAIN pin/bit) 1.8 V logic compatibility 400 kHz I2C-compatible serial interface 20-lead, RoHS-compliant TSSOP and LFCSP

12-Bit Current Output, Microprocessor-Compatible DAC Features:Single chip construction Double buffered latch for 8-bit P-compatibility Fast settling time: 500 ns max to 1/2 LSB High stability buried Zener reference on chip Monotinicity guaranteed over temperature Linearity guaranteed over temperature: LSB max (AD567K) Guaranteed for operation with 12 V or 15 V supplies See Data Sheet for Additional Information