2.7 V to 5.5 V, Serial-Input, Voltage-Output, 16-Bit DACs

Real-Time Analog Computational Unit (ACU) Features: VOUT = VY (VZ divided by VX)m Transfer Function Wide Dynamic Range (Denominator) -1000:1 Simultaneous Multiplication and Division Resistor-Programmable Powers and Roots No External Trims Required Low Input Offsets <100 µV Low Error ±0.25% of Reading (100:1 Range) +2 V and +10 V On-Chip References Monolithic Construction

Internally Trimmed Precision IC Multiplier Features: Pretrimmed to ±0.25% max 4-Quadrant  Error (AD534L) All Inputs (X, Y and Z) Differential, High Impedance for [(X1 - X2) (Y1 - Y2)/10 V] + Z2 Transfer Function Scale-Factor Adjustable to Provide up to X100 Gain Low Noise Design: 90 µV rms, 10 Hz-10 kHz Low Cost, Monolithic Construction Excellent Long Term Stability

33-Position Digital Potentiometer Features: 10K, 50K Ω End-to-End Terminal Resistance 33 Position AD5201 Wiper Connects Directly to Both End Terminals 3-Wire SPI Compatible Serial Data Input +2.7 V to +5.5 V Single-Supply; ±2.7 V Dual-Supply Operation, Ideal for Ground Referenced AC Signals Power ON Mid-Scale Preset Fully Characterized  (Rheostat, and Potentiometer-Divider Mode DNL, THD, Noise, Bandwidth), No Surprises! Compact micro-SOIC package <1.1 mm Height, Ideal for PCMCIA Cards

AD22100 - Voltage Output Temperature Sensor with Signal Conditioning

Supervisory Circuits with Watchdog and Manual Reset in 5-Lead SC70 and SOT-23

120 mA Switched Capacitor Voltage Inverter with Regulated Output

800 MHz, 50 Mw Current Feedback Amplifier

800 MHz, 50 Mw Current Feedback Amplifier

1.2 V Micropower, Precision Shunt Voltage Reference

Isolated Precision Half-Bridge Driver, 0.1 A Amp Output

Monolithic 16-Bit Serial/Byte DACPORT Features: Complete 16-Bit D/A Function On-Chip Output Amplifier On-Chip Buried Zener Voltage Reference ±1LSB Integral Linearity 15-Bit Monotonic over Temperature Microprocessor Compatible Serial or Byte Input Double Buffered Latches Fast (40 ns) Write Pulse Asynchronous Clear (to 0 V) Function Serial Output Pin Facilitates Daisy Chaining Unipolar or Bipolar Output Low Glitch: 15 nV-s Low THD+N: 0.009%

Monolithic 16-Bit Serial/Byte DACPORT

DC to 600 MHz, Dual-Digital Variable Gain Amplifiers Features: Matched pair of differential, digitally controlled VGAs Gain range: 4.5 dB to 20.25 dB 0.25 dB gain step size Operating frequency DC to 150 MHz (2 V p-p) 3 dB bandwidth: 600 MHz Noise figure (NF) 11.4 dB at 10 MHz at maximum gain 18 dB at 10 MHz at minimum gain OIP3: 45 dBm at 10 MHz HD2/HD3 Better than −90 dBc for 2 V p-p output at 10 MHz at maximum gain Differential input and output Adjustable output common-mode Optional dc output offset correction Serial/parallel mode gain control Power-down feature Single 5 V supply operation

Single Channel, 12-Bit, Current Source & Voltage Output DAC, HART Connectivity Features: 12-bit resolution and monotonicity Current output ranges: 4 mA to 20 mA, 0 mA to 20 mA, or 0 mA to 24 mA ±0.01% FSR typical total unadjusted error (TUE) ±3 ppm FSR/°C output drift Voltage output ranges: 0 V to 5 V, 0 V to 10 V, ±5 V, or ±10 V 10% overrange ±0.01% FSR typical TUE ±2 ppm FSR/°C output drift Flexible serial digital interface On-chip output fault detection On-chip reference: 10 ppm/°C maximum Optional regulated DVCC output Asynchronous clear function Power supply range AVDD: 10.8 V to 40 V AVSS: −26.4 V to −3 V/0 V Current loop compliance voltage: AVDD – 2.5 V Temperature range: −40°C to +105°C TSSOP and LFCSP packages

Single Channel, 16-Bit, Current Source & Voltage Output DAC, HART Connectivity Features: 16-bit resolution and monotonicity Current output ranges: 4 mA to 20 mA, 0 mA to 20 mA, or 0 mA to 24 mA ±0.01% FSR typical total unadjusted error (TUE) ±3 ppm FSR/°C output drift Voltage output ranges: 0 V to 5 V, 0 V to 10 V, ±5 V, or ±10 V 10% overrange ±0.01% FSR typical TUE ±2 ppm FSR/°C output drift Flexible serial digital interface On-chip output fault detection On-chip reference: 10 ppm/°C maximum Optional regulated DVCC output Asynchronous clear function Power supply range AVDD: 10.8 V to 40 V AVSS: −26.4 V to −3 V/0 V Current loop compliance voltage: AVDD – 2.5 V Temperature range: −40°C to +105°C TSSOP and LFCSP packages

Filterless, High Efficiency, Mono 3 W Class-D Audio Amplifier Features: Filterless Class-D amplifier with Σ-Δ modulation No sync necessary when using multiple Class-D amplifiers from Analog Devices, Inc. 3 W into 3 Ω load and 1.4 W into 8 Ω load at 5.0 V supply with <1% total harmonic distortion (THD + N) 93% efficiency at 5.0 V, 1.4 W into 8 Ω speaker >103 dB signal-to-noise ratio (SNR) Single-supply operation from 2.5 V to 5.5 V 20 nA ultralow shutdown current Short-circuit and thermal protection Available in 9-ball, 1.5 mm × 1.5 mm WLCSP Pop-and-click suppression Built-in resistors reduce board component count Default fixed 6 dB or user adjustable gain setting

Compact, 600 mA, 3 MHz, Step-Down DC-to-DC Converter Features: Peak efficiency: 95% 3 MHz fixed frequency operation Typical quiescent current: 18 μA Maximum load current: 600 mA Input voltage: 2.3 V to 5.5 V Uses tiny multilayer inductors and capacitors Current mode architecture for fast load and line transient response 100% duty cycle low dropout mode Internal synchronous rectifier Internal soft start See data sheet for additional Information

Compact, 600 mA, 3 MHz, Step-Down DC-to-DC Converter Features: Peak efficiency: 95% 3 MHz fixed frequency operation Typical quiescent current: 18 μA Maximum load current: 600 mA Input voltage: 2.3 V to 5.5 V Uses tiny multilayer inductors and capacitors Current mode architecture for fast load and line transient response 100% duty cycle low dropout mode Internal synchronous rectifier Internal soft start See data sheet for additional Information

3 V LVDS Quad CMOS Differential Line Receiver