RBB10-2.0-EVM-1
RECOM Power Inc.Power Management IC Development Tools 2.3-5.5Vin 05Vout 2 to 4A Eval
EMC Compatible Automotive LED Rear Lamp With Sequential Turn Animation Evaluation Module
Texas InstrumentsEMC Compatible Automotive LED Rear Lamp With Sequential Turn Animation Evaluation Module
Network synchronizer clock evaluation module
Texas InstrumentsThe LMK05318EVM is an evaluation module for the LMK05318 Network Synchronizer Clock device. The EVM can be used as a flexible, synchronous clock source for rapid evaluation, compliance testing, and system prototyping. SMA ports provide access to the LMK05318 clock inputs and outputs for interfacing to 50-Ω test equipment. Onboard XO options are included, but can be reworked using the various XO/TCXO/OCXO footprint options or else bypassed to use the external SMA input.
The LMK05318EVM provides a USB-based interface to access the I2C/SPI bus and control pins of the LMK05318. The TICS PRO software GUI can be used to program the LMK05318's registers and EEPROM to store custom start-up clock settings.
Features:
One Digital PLL (DPLL) with programmable bandwidths and Two Fractional Analog PLLs (APLLs) for Flexible Clock Generation
Two reference inputs to the DPLL supporting hitless switching & holdover
Eight output clocks with 50-fs RMS phase jitter (12 kHz to 20 MHz)
On-chip EEPROM for custom start-up clock configurations
Flexible oscillator sources: onboard XOs or external SMA input options
USB interface supports I2C/SPI control register access and general-purpose input pin control
Whats included:
3-ft. Mini-USB Cable (MPN 3021003-03)
PIC-IoT WG Development Board
Microchip Technology Inc.The PIC-IoT WG Development Board combines a powerful PIC24FJ128GA705 MCU, an ATECC608A CryptoAuthentication™ secure element IC and the fully-certified ATWINC1510 Wi-Fi® network controller - which provides the most simple and effective way to connect your embedded application to the Google Cloud IoT Core. The board also includes an on-board debugger, and requires no external hardware to program and debug the MCU. Out of the box, the MCU comes preloaded with firmware that enables you to quickly connect and send data to the Google Cloud Platform using the on-board temperature and light sensors. Once you are ready to build your own custom design, you can easily generate code using the free software libraries in MPLAB Code Configurator (MCC). The PIC-IoT WG Board is supported by MPLAB® X IDE.
Features:
PIC24FJ128GA705 microcontroller
128 KB Flash Memory & 16 KB SRAM
ATWINC1510 WiFi Module
Single-band 2.4GHz b/g/n IoT Network Controller, Pre-certified Module
ATECC608A CryptoAuthentication™ device
Protected Storage for 16 Keys, SHA256, AES-CCM, ECDH (Elliptic Curve Diffie-Hellman), ECDSA
Other Board Features
Four Status LED’s
Blue LED indicates a connection to Wi-Fi network
Green LED indicates a connection to the Google Cloud servers
Yellow LED indicates a packet of sensor data has been successfully published to the Google Cloud MQTT servers
Red LED indicates an Error occurred
Two mechanical buttons
TEMT6000 Light sensor
MCP9808 Temperature sensor
mikroBUS header to interface to MikroElekronika click Boards™
On-board Debugger
Auto-ID for board identification in Microchip MPLAB X
Programming and debugging
Virtual COM port (CDC)
One logic analyser channel (DGI GPIO)
USB and battery powered
Integrated Li-Ion/LiPo battery charger
ISL76534EVAL1Z
Renesas Electronics CorporationISL76534EVAL1Z - EVAL BOARD 1, 28LD, X2QFN, ROHS COMPLIANT
ADP2301-EVALZ
Analog Devices Inc.The ADP2300?/ ADP2301 are compact, constant-frequency, current-mode, step-down dc-to-dc regulators with integrated power MOSFET. The ADP2300/ADP2301 devices run from any input voltage from 3.0 V up to 20 V, making them suitable for a wide range of applications. A precise, low voltage internal reference makes these devices ideal for generating a regulated output voltage as low as 0.8 V, with ?2% accuracy, for up to 1.2 A load current.There are two frequency options: the ADP2300 runs at 700 kHz and the ADP2301 runs at 1.4 MHz. These options allow users to make decisions based on the trade-off between efficiency and the size of the total solution. Current-mode control provides fast and stable line and load transient performance. Each ADP2300/ ADP2301 device includes an internal soft start to prevent inrush current at power up. Other key safety features include short-circuit protection, thermal shutdown (TSD) and input undervoltage lockout (UVLO). Precision enable pin threshold voltage allows ADP2300/ADP2301 to be easily sequenced from other input/ output supplies, or the enable pin can be used as a programmable UVLO input by using resistive divider.The ADP2300/ADP2301 are available in a 6-lead TSOT package and are rated for the ?40?C to +125?C junction temperature range.APPLICATIONS LDO replacement for digital load applications Intermediate power rail conversion Communications and networking Industrial and instrumentation Healthcare and Medical Consumer
EVAL_PAN1323
Panasonic Industrial DevicesBluetooth Development Tools (802.15.1) PAN1323 Evaluation Kit
1.5-A Stepper Motor Driver with Integrated Current Sensing Evaluation Module
Texas Instruments1.5-A Stepper Motor Driver with Integrated Current Sensing Evaluation Module
