Search results
Search the entire Electronics Datasheets database for parts, reference designs, application notes and evaluation kits.
2FA1-NLSP-PCBB6
Amphenol RF
From $2.33 • 10 k+ units available from multiple sources
2FA1-NLSP-PCBB6
Amphenol RF
FAKRA GEN 2 PCB THROUGH HOLE STRAIGHT PLUG 50 OHM L KEY CODE / TRAY
| Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 | |
|---|---|---|---|---|---|---|---|---|---|---|
| DigiKey | 115-2FA1-NLSP-PCBB6-ND | 163 | 1 | $4.78 | $4.06 | $3.62 | $3.45 | $2.93 | $2.75 | Buy |
| Newark | 2FA1-NLSP-PCBB6 | 0 | 250 | $3.65 | $3.65 | Buy | ||||
| Heiland | AMR2FA1-NLSP-PCBB6 | 0 | Buy | |||||||
| Quarktwin Electronic Components | 2FA1-NLSP-PCBB6 | 30,468 | 10 | $3.95 | $3.56 | $3.56 | $3.20 | $2.59 | $2.33 | Buy |
Implementing a 60-W End-to-End PoE System
Texas Instruments
Implementing a 60-W End-to-End PoE System
Texas Instruments
Specialized applications such as WiMax base stations may require more than 50 W of power, but the current IEEE 802.3at standard defines 25.5-W, two-pair systems. This application report presents a non
CC2420EM Reference Design
Texas Instruments
CC2420EM Reference Design
Texas Instruments
The CC2420EM reference design contains schematics and layout files for the CC2420EM evaluation module used in the CC2420DK development kit.The reference design demonstrates good techniques for CC2420 decoupling and RF layout. For optimum RF performance: these parts should be copied accurately. This is a 2-layer reference design with a discrete balun and SMA antenna connector designed for a single ended 50 ohm antenna.
Bandpass-filtered -40-dB attenuator: less than 0.1-dB error reference design
Texas Instruments
Bandpass-filtered -40-dB attenuator: less than 0.1-dB error reference design
Texas Instruments
This TI Verified Design is a -40dB band-pass filtered inverting attenuator. The circuit creates a filtered: inverted: and attenuated output from a single-ended input signal that can be used for test and measurement: or other waveform generation applications. A single low-noise OPA1611 op amp is used to invert: attenuate: and filter the input signal. The low-noise and low-distortion performance of the OPA1611 allows for a very accurate and clean output signals.See more TI Precision Designs
14V-35V Input: 12V/7A5: 5V/100mA: Active Clamp
Texas Instruments
14V-35V Input: 12V/7A5: 5V/100mA: Active Clamp
Texas Instruments
This Active clamp Forward supplies two outputs: 12V @ 7.5A and 5V @ 100mA: with a LDO: starting from a 14V…35V input source: reaching 94% efficiency with sync. Rectification.
Capacitive Touchscreen Display Reference Design
Texas Instruments
Capacitive Touchscreen Display Reference Design
Texas Instruments
Capacitive touchscreen displays generally provide a higher quality and better user experience than traditional resistive touchscreen displays. This reference design shows how to interface a capacitive touchscreen display to the Sitara AM437x processors. The display has an integrated touchscreen controller that interfaces with the AM437x via its I2C port.
CQ0201BRNPO8BN2R5
Yageo
From $0.06 • 10 k+ units available from multiple sources
CQ0201BRNPO8BN2R5
Yageo
Surface Mount Ceramic Multilayer Capacitor 2.5pF 0.1pF C0G 25V 0201 Paper T/R
| Distributor | SKU | Stock | MOQ | 1 | 10 | 50 | 100 | 1,000 | 10,000 | |
|---|---|---|---|---|---|---|---|---|---|---|
| DigiKey | 13-CQ0201BRNPO8BN2R5DKR-ND | 74,875 | $0.11 | $0.06 | $0.06 | $0.04 | $0.02 | $0.02 | Buy | |
| AVNET Express | CQ0201BRNPO8BN2R5 | 0 | 15,000 | Buy | ||||||
| Newark | CQ0201BRNPO8BN2R5 | 0 | 105,000 | Buy | ||||||
| Farnell | CQ0201BRNPO8BN2R5 | 0 | 15,000 | Buy | ||||||
| Jak Electronics | CQ0201BRNPO8BN2R5 | 0 | Buy | |||||||
| Quarktwin Electronic Components | CQ0201BRNPO8BN2R5 | 7,603 | 10 | $0.10 | $0.09 | $0.09 | $0.08 | $0.06 | $0.06 | Buy |
Battery Charge Solution for Single-Cell Li-Ion Battery-Powered Systems Evaluation Module
Texas Instruments
Battery Charge Solution for Single-Cell Li-Ion Battery-Powered Systems Evaluation Module
Texas Instruments
Battery Charge Solution for Single-Cell Li-Ion Battery-Powered Systems Evaluation Module
A Simple Glass-Breakage Detector Reference Design
Texas Instruments
A Simple Glass-Breakage Detector Reference Design
Texas Instruments
This reference design describes a simple glass breakage detector using the MSP430F2274 and was developed to operate at low power: allowing long battery life. The algorithm is based on the spectral analysis of a typical glass breakage signal by analyzing signal characteristics such as peak content: number of zero crossings: and frequency composition. A glass breakage alert is indicated by an onboard buzzer and an LED.
PoE PSE Type 2 (30W) IEEE 802.3at Fully Autonomous Quad Port Solution.
Texas Instruments
PoE PSE Type 2 (30W) IEEE 802.3at Fully Autonomous Quad Port Solution.
Texas Instruments
This reference design is fully autonomous IEEE802.3at: Type-2 (30 W) Power-over-Ethernet (PoE) 4-port power sourcing equipment (PSE). An additional configuration of two non-standard: high-power ports (This reference design is made up of two boards:Motherboard (TPS23861EVM-612)Daughter board (TPS23861EVM-613)The daughter board features two TPS23861 IEEE 802.3at PoE PSE controller devices. The motherboard provides a multi-port base platform interface for the daughter board. Additionally: the motherboard provides interfaces for two optional boards: MSP-EXP430G2 LaunchPad™ (if custom power management programmability is desired) and USB-to-GPIO interface adapter (if PC GUI-based power management configuration is desired).This reference design has undergone exhaustive PoE testing and passes all industry-recognized conformance/interoperability test suites allowing customers to copy/paste the design without concern. The 2-layer PCB: daughter card: design delivers all of this on a low-cost platform.