Search results

DC1369A-M: Demo Board for the LTC2262-14 14-Bit, 150Msps Ultralow Power 1.8V ADC

The CC25XX Folded Dipole reference design contains schematics and layout files for a CC2500EM with a folded dipole PCB antenna. This antenna requires maximum two capacitors in the matching network and can be used together with the following products; CC2500: CC2510: CC2511 and CC2511The reference design shows the dimensions of the antenna and how it should be connected to the radio. For more information about antenna dimensions and performance please see Design Note 004.

The PMP7022 is 1mW (3.1V at 300uA) galvanic isolated DC/DC reference design built to supply a MSP430 metering unit. The design utilising again MSP430 open loop push-pull stage. Very efficient design with current supply (inclusive load current) as low as 800uA. Input voltage range: 3.1VDC-3.3VDC; Output current: 300uA; Output voltage: 3.1VDC

The AD7879/AD7889 are 12-bit successive approximationanalog-to-digital converters (SAR ADCs) with a synchronousserial interface and low on-resistance switches for driving 4-wireresistive touch screens. The AD7879/AD7889 work with a verylow power supply?a single 1.6 V to 3.6 V supply?and feature athroughput rate of 105 kSPS. The devices include a shutdownmode that reduces current consumption to less than 6 ?A.To reduce the effects of noise from LCDs and other sources, theAD7879/AD7889 contain a preprocessing block. Thepreprocessing function consists of a median filter and anaveraging filter. The combination of these two filters provides amore robust solution, discarding the spurious noise in the signaland keeping only the data of interest. The size of both filters isprogrammable. Other user-programmable conversion controlsinclude variable acquisition time and first conversion delay; upto 16 averages can be taken per conversion. The AD7879/AD7889can run in slave mode or standalone (master) mode, using anautomatic conversion sequencer and timer.The AD7879/AD7889 have a programmable pin that canoperate as an auxiliary input to the ADCs, as a battery monitor,or as a general-purpose input/output (GPIO). In addition, aprogrammable interrupt output can operate in three modes: as ageneral-purpose interrupt to signal when new data is available(DAV), as an interrupt to indicate when limits are exceeded(INT), or as a pen-down interrupt when the screen is touched(PENIRQ). The AD7879/AD7889 offer temperaturemeasurement and touch pressure measurement.The AD7879 is available in a 12-ball, 1.6 mm ? 2 mm WLCSPand in a 16-lead, 4 mm ? 4 mm LFCSP. The AD7889 is availablein a backside coated version of the WLCSP. Both devices supportan SPI interface (AD7879/AD7889) or an I2C interface (AD7879-1/AD7889-1).Applications Personal digital assistants Smart handheld devices Touch screen monitors Point-of-sale terminals Medical devices Cell phones

The ADATE209 is a dual pin driver designed for testing DDR2, DDR3, and DDR4. It can also be used for high speed SoC applications, such as testing PCI Express 1.0 and HDMI?. The device is a three-level driver capable of high fidelity swings from 200 mV to 4 V over a ?1 V to +3.5 V range. It has rise/fall times (20% to 80%) under 120 ps for a 2 V programmed swing and 150 ps for a 3 V programmed swing, and is capable of supporting data rates of 4.4 Gbps and 3.2 Gbps, respectively.The device is capable of high speed transitions into and out of termination mode. It also contains peaking/pre-emphasis circuitry.The ADATE209 is available in an 8 mm ? 8 mm, 49-ball CSP_BGA.APPLICATIONS Automatic test equipment Semiconductor test systems Board test systems Instrumentation and characterization equipment High speed memory testing (DDR2/DDR3/DDR4) HDMI testing

TI supports four methods of booting a 32-bit floating point DSP following system reset. Each method uses a different combination of the TMS320C32 silicon features software and hardware tools. Each combination forms an integrated development environment that includes features to support most system boot requirements. This document describes in detail the four methods of system boot and provid

Video surveillance systems are currently undergoing a transition from traditional analog solutions to digital solutions. This paper will discuss how to implement a digital video surveillance system ov

The ADIS16477 is a precision, miniature MEMS inertial measurement unit (IMU) that includes a triaxial gyroscope and a triaxial accelerometer. Each inertial sensor in the ADIS16477 combines with signal conditioning that optimizes dynamic performance. The factory calibration characterizes each sensor for sensitivity, bias, alignment, linear acceleration (gyroscope bias), and point of percussion (accelerometer location). As a result, each sensor has dynamic compensation formulas that provide accurate sensor measurements over a broad set of conditions.The ADIS16477 provides a simple, cost effective method for integrating accurate, multiaxis inertial sensing into industrial systems, especially when compared with the complexity and investment associated with discrete designs. All necessary motion testing and calibration are part of the production process at the factory, greatly reducing system integration time. Tight orthogonal alignment simplifies inertial frame alignment in navigation systems. The serial peripheral interface (SPI) and register structure provide a simple interface for data collection and configuration control.The ADIS16477 is available in a 44-ball, ball grid array (BGA) package that is approximately 11 mm ? 15 mm ? 11 mm.Applications Navigation, stabilization, and instrumentation Unmanned and autonomous vehicles Smart agriculture/construction machinery Factory/industrial automation, robotics Virtual/augmented reality Internet of Moving Things

With the proper considerations ceramic output capacitors can be used with low dropout regulators (LDO) and DC/DC switching converters that require tantulum output capacitors.

This application report describes multiplexing applications for differential bus signals and how to use Texas Instruments high-speed passive-switch products (TS3DV416 TS3DV520 TS3DV520E TS3DV421 and others on the product roadmap such as TS3DSxxx and TS2DSxxxx) with various bandwidths and data rates. This application report describes the components that make up the system applications includin