Parts search results for: DS28C36BQ U

Diode 40 V 8A Surface Mount Powermite 3

DeepCover Secure Authenticator 2.2V to 3.63V 1MHz 6-Pin TDFN-EP

The DS28C36 is a DeepCover® secure authenticator that provides a core set of cryptographic tools derived from integrated asymmetric (ECC-P256) and symmetric (SHA-256) security functions. In addition to the security services provided by the hardware implemented crypto engines, the device integrates a FIPS/NIST true random number generator (RNG), 8Kb of secured EEPROM, a decrement-only counter, two pins of configurable GPIO, and a unique 64-bit ROM identification number (ROM ID).The ECC public/private key capabilities operate from the NIST defined P-256 curve and include FIPS 186 compliant ECDSA signature generation and verification to support a bidirectional asymmetric key authentication model. The SHA-256 secret-key capabilities are compliant with FIPS 180 and are flexibly used either in conjunction with ECDSA operations or independently for multipleHMAC functions.Two GPIO pins can be independently operated under command control and include configurability supporting authenticated and nonauthenticated operation including an ECDSA-based crypto-robust mode to support secure-boot of a host processor.DeepCover embedded security solutions cloak sensitive data under multiple layers of advanced security to provide the most secure key storage possible. To protect against device-level security attacks, invasive and noninvasive countermeasures are implemented including active die shield, encrypted storage of keys, and algorithmic methods.Explore security topics and test drive secure authenticators with the Maxim Security Lab Secure Boot and Secure Download - Part 1: Protecting IoT Devices with Secure Authentication Secure Boot and Secure Download - Part 3: Using the DS28C36 Secure Boot and Secure Download - Part 2: Technologies Behind Embedded Security ApplicationsAccessory and Peripheral Secure AuthenticationIoT Node Crypto-ProtectionSecure Boot or Download of Firmware and/or System ParametersSecure Storage of Cryptographic Keys for a Host Controller

ADI DeepCover Secure Authenticator

DeepCover Secure Authenticator 6-Pin TDFN EP Tube

Security ICs / Authentication ICs DeepCover Secure Authenticator 1-WIRE

Diode 40 V 8A Surface Mount Powermite 3

DeepCover Secure Authenticator 6-Pin TDFN EP T/R

DeepCover Secure Authenticator 8Kb 3.3V 6-Pin TDFN-EP

DeepCover Secure Authenticator 2.2V to 3.63V 1MHz 6-Pin TDFN-EP T/R

The DS28C36 is a DeepCover® secure authenticator that provides a core set of cryptographic tools derived from integrated asymmetric (ECC-P256) and symmetric (SHA-256) security functions. In addition to the security services provided by the hardware implemented crypto engines, the device integrates a FIPS/NIST true random number generator (RNG), 8Kb of secured EEPROM, a decrement-only counter, two pins of configurable GPIO, and a unique 64-bit ROM identification number (ROM ID).The ECC public/private key capabilities operate from the NIST defined P-256 curve and include FIPS 186 compliant ECDSA signature generation and verification to support a bidirectional asymmetric key authentication model. The SHA-256 secret-key capabilities are compliant with FIPS 180 and are flexibly used either in conjunction with ECDSA operations or independently for multipleHMAC functions.Two GPIO pins can be independently operated under command control and include configurability supporting authenticated and nonauthenticated operation including an ECDSA-based crypto-robust mode to support secure-boot of a host processor.DeepCover embedded security solutions cloak sensitive data under multiple layers of advanced security to provide the most secure key storage possible. To protect against device-level security attacks, invasive and noninvasive countermeasures are implemented including active die shield, encrypted storage of keys, and algorithmic methods.Explore security topics and test drive secure authenticators with the Maxim Security Lab Secure Boot and Secure Download - Part 1: Protecting IoT Devices with Secure Authentication Secure Boot and Secure Download - Part 3: Using the DS28C36 Secure Boot and Secure Download - Part 2: Technologies Behind Embedded Security ApplicationsAccessory and Peripheral Secure AuthenticationIoT Node Crypto-ProtectionSecure Boot or Download of Firmware and/or System ParametersSecure Storage of Cryptographic Keys for a Host Controller

The DS28C36 is a DeepCover® secure authenticator that provides a core set of cryptographic tools derived from integrated asymmetric (ECC-P256) and symmetric (SHA-256) security functions. In addition to the security services provided by the hardware implemented crypto engines, the device integrates a FIPS/NIST true random number generator (RNG), 8Kb of secured EEPROM, a decrement-only counter, two pins of configurable GPIO, and a unique 64-bit ROM identification number (ROM ID).The ECC public/private key capabilities operate from the NIST defined P-256 curve and include FIPS 186 compliant ECDSA signature generation and verification to support a bidirectional asymmetric key authentication model. The SHA-256 secret-key capabilities are compliant with FIPS 180 and are flexibly used either in conjunction with ECDSA operations or independently for multipleHMAC functions.Two GPIO pins can be independently operated under command control and include configurability supporting authenticated and nonauthenticated operation including an ECDSA-based crypto-robust mode to support secure-boot of a host processor.DeepCover embedded security solutions cloak sensitive data under multiple layers of advanced security to provide the most secure key storage possible. To protect against device-level security attacks, invasive and noninvasive countermeasures are implemented including active die shield, encrypted storage of keys, and algorithmic methods.Explore security topics and test drive secure authenticators with the Maxim Security Lab Secure Boot and Secure Download - Part 1: Protecting IoT Devices with Secure Authentication Secure Boot and Secure Download - Part 3: Using the DS28C36 Secure Boot and Secure Download - Part 2: Technologies Behind Embedded Security ApplicationsAccessory and Peripheral Secure AuthenticationIoT Node Crypto-ProtectionSecure Boot or Download of Firmware and/or System ParametersSecure Storage of Cryptographic Keys for a Host Controller

Titanium Ti375 N1156 FPGA Early Access PCIe Card Ti375N1156 Titanium™ FPGA Embedded Evaluation Board

DeepCover Secure Authenticator 8Kb 3.3V 6-Pin TDFN-EP T/R

DEEPCOVER SECURE AUTHENTICATOR, 85DEG C ROHS COMPLIANT: YES

The DS28E36 is a DeepCover® secure authenticator that provides a core set of cryptographic tools derived from integrated asymmetric (ECC-P256) and symmetric (SHA-256) security functions. In addition to the security services provided by the hardware implemented crypto engines, the device integrates a FIPS/NIST true random number generator (RNG), 8Kb of secured EEPROM, a decrement-only counter, two pins of configurable GPIO, and a unique 64-bit ROM identification number (ROM ID). This unique ROM ID is used as a fundamental input parameter for cryptographic operations and also serves as an electronic serial number within the application. The DS28E36 communicates over the single-contact 1-Wire® bus at overdrive speed. The communication follows the 1-Wire protocol with the ROM ID acting as node address in the case of a multidevice 1-Wire network.The ECC public/private key capabilities operate from the NIST defined P-256 curve and include FIPS 186 compliant ECDSA signature generation and verification to support a bidirectional asymmetric key authentication model. The SHA-256 secret-key capabilities are compliant with FIPS 180 and are flexibly used either in conjunction with ECDSA operations or independently for multiple HMAC functions.Two GPIO pins can be independently operated under command control and include configurability supporting authenticated and nonauthenticated operation including an ECDSA-based crypto-robust mode to support secure-boot of a host processor.DeepCover embedded security solutions cloak sensitive data under multiple layers of advanced security to provide the most secure key storage possible. To protect against device-level security attacks, invasive and noninvasive countermeasures are implemented including active die shield, encrypted storage of keys, and algorithmic methods. Secure Boot and Secure Download - Part 1: Protecting IoT Devices with Secure Authentication Secure Boot and Secure Download - Part 3: Using the DS28C36 Secure Boot and Secure Download - Part 2: Technologies Behind Embedded Security ApplicationsAccessory and Peripheral Secure AuthenticationIoT Node Crypto-ProtectionSecure Boot or Download of Firmware and/or System ParametersSecure Storage of Cryptographic Keys for a Host Controller

The DS28C36 is a DeepCover® secure authenticator that provides a core set of cryptographic tools derived from integrated asymmetric (ECC-P256) and symmetric (SHA-256) security functions. In addition to the security services provided by the hardware implemented crypto engines, the device integrates a FIPS/NIST true random number generator (RNG), 8Kb of secured EEPROM, a decrement-only counter, two pins of configurable GPIO, and a unique 64-bit ROM identification number (ROM ID).The ECC public/private key capabilities operate from the NIST defined P-256 curve and include FIPS 186 compliant ECDSA signature generation and verification to support a bidirectional asymmetric key authentication model. The SHA-256 secret-key capabilities are compliant with FIPS 180 and are flexibly used either in conjunction with ECDSA operations or independently for multipleHMAC functions.Two GPIO pins can be independently operated under command control and include configurability supporting authenticated and nonauthenticated operation including an ECDSA-based crypto-robust mode to support secure-boot of a host processor.DeepCover embedded security solutions cloak sensitive data under multiple layers of advanced security to provide the most secure key storage possible. To protect against device-level security attacks, invasive and noninvasive countermeasures are implemented including active die shield, encrypted storage of keys, and algorithmic methods.Explore security topics and test drive secure authenticators with the Maxim Security Lab Secure Boot and Secure Download - Part 1: Protecting IoT Devices with Secure Authentication Secure Boot and Secure Download - Part 3: Using the DS28C36 Secure Boot and Secure Download - Part 2: Technologies Behind Embedded Security ApplicationsAccessory and Peripheral Secure AuthenticationIoT Node Crypto-ProtectionSecure Boot or Download of Firmware and/or System ParametersSecure Storage of Cryptographic Keys for a Host Controller

LOW VOLTAGE SHA3 AUTHENTICATOR, 85DEG C ROHS COMPLIANT: YES

The DS28C16 secure authenticator combines FIPS202-compliant Secure Hash Algorithm (SHA-3) challenge and response authentication with secured EEPROM.The device provides a core set of cryptographic tools derived from integrated blocks including a SHA-3 engine, 256 bits of secured user EEPROM, a decrement-only counter and a unique 64-bit ROM identification number (ROM ID). The unique ROM ID is used as a fundamental input parameter for cryptographic operations and serves as an electronic serial number within the application.ApplicationsAccessory and Peripheral Secure AuthenticationBattery Authentication and Charge Cycle TrackingMedical Tools/Accessories Authentication and Calibration

The DS28C39 is an ECDSA public-key-based bidirectional secure authenticator that incorporates Maxim’s patented ChipDNA™ feature, a physically unclonable function (PUF) to provide a cost-effective solution with the ultimate protection against security attacks. Using the random variation of semiconductor device characteristics that naturally occur during wafer fabrication, the ChipDNA circuit generates a unique output value that is repeatable over time, temperature, and operating voltage. Attempts to probe or observe ChipDNA operation modifies the underlying circuit characteristics, preventing discovery of the unique value used by the chip cryptographic functions. The DS28C39 utilizes the ChipDNA output as key content to cryptographically secure all device stored data and as the private key for the ECDSA signing operation. With ChipDNA capability, the device provides a core set of cryptographic tools derived from integrated blocks including an asymmetric (ECC-P256) hardware engine, a FIPS/NIST-compliant true random number generator (TRNG), 2Kb of secured EEPROM, a decrement-only counter and a unique 64-bit ROM identification number (ROM ID). The ECC public/ private key capabilities operate from the NIST-defined P-256 curve to provide a FIPS 186-compliant ECDSA signature generation function. The unique ROM ID is used as a fundamental input parameter for cryptographic operations and serves as an electronic serial number within the application. Lastly, the DS28C39 supports I2C communication at the 100kHz standard mode.ApplicationsAuthentication of Medical Sensors and ToolsSecure Management of Limited Use ConsumablesIoT Node AuthenticationPeripheral AuthenticationReference Design License ManagementPrinter Cartridge Identification and Authentication