Search results for: ADUM3100BRZ-RL7

The ADuM3100 is a digital isolator based on the Analog Devices, Inc. iCoupler® technology. Combining high speed CMOS and monolithic transformer technology, this isolation component provides outstanding performance characteristics superior to alternatives, such as optocoupler devices.Configured as a pin-compatible replacement for existing high speed optocouplers, the ADuM3100 supports data rates as high as 25 Mbps and 100 Mbps.The ADuM3100 operates with a voltage supply ranging from 3.0 V to 5.5 V, boasts a propagation delay of <18 ns and an edge asymmetry of <2 ns, and is compatible with temperatures up to 105°C. It operates at very low power, less than 2.0 mA of quiescent current (sum of both sides), and a dynamic current of less than 160 μA per Mbps of data rate. Unlike other optocoupler alternatives, the ADuM3100 provides dc correctness with a patented refresh feature that continuously updates the output signal.The ADuM3100 is offered in two grades. The ADuM3100AR and ADuM3100BR can operate up to a maximum temperature of 105°C and support data rates up to 25 Mbps and 100 Mbps, respectively.In comparison to the ADuM1100 digital isolator, the ADuM3100 contains various circuit and layout changes to provide increased capability relative to system-level IEC 61000-4-× testing (ESD/burst/surge). The precise capability in these tests for either the ADuM1100 or ADuM3100 is strongly determined by the design and layout of the user’s board or module. For more information, see Application Note AN-793, ESD/Latch-Up Considerations with iCoupler® Isolation Products.APPLICATIONS Digital fieldbus isolation Opto-isolator replacement Computer-peripheral interface Microprocessor system interface General instrumentation and data acquisition

General Purpose Digital Isolator 2500Vrms 1 Channel 100Mbps 25kV/µs CMTI 8-SOIC (0.154", 3.90mm Width)

The ADuM1100 is a digital isolator based on Analog Devices Inc., iCoupler® technology. Combining high speed CMOS and monolithic air core transformer technology, this isolation component provides outstanding performance characteristics superior to alternatives, such as optocoupler devices.Configured as a pin-compatible replacement for existing high speed optocouplers, the ADuM1100 supports data rates as high as 25 Mbps and 100 Mbps.The ADuM1100 operates with a voltage supply ranging from 3.0 V to 5.5 V, boasts a propagation delay of <18 ns and edge asymmetry of <2 ns, and is compatible with temperatures up to 125°C. It operates at very low power, less than 0.9 mA of quiescent current (sum of both sides), and a dynamic current of less than 160 μA per Mbps of data rate. Unlike other optocoupler alternatives, the ADuM1100 provides dc correctness with a patented refresh feature that continuously updates the output signal.The ADuM1100 is offered in three grades. The ADuM1100AR and ADuM1100BR can operate up to a maximum temperature of 105°C and support data rates up to 25 Mbps and 100 Mbps, respectively. The ADuM1100UR can operate up to a maximum temperature of 125°C and supports data rates up to 100 Mbps.APPLICATIONS Digital field bus isolation Opto-isolator replacement Computer-peripheral interface Microprocessor system interface General instrumentation and data acquisition applications

The ADuM3200 / ADuM3201 are dual-channel, digital isolatorsbased on the Analog Devices, Inc., iCoupler® technology.Combining high speed CMOS and monolithic transformertechnology, these isolation components provide outstandingperformance characteristics superior to alternatives such asoptocoupler devices.By avoiding the use of LEDs and photodiodes, iCouplerdevices remove the design difficulties commonly associatedwith optocouplers. The typical optocoupler concerns regardinguncertain current transfer ratios, nonlinear transfer functions,and temperature and lifetime effects are eliminated with thesimple iCoupler digital interfaces and stable performance characteristics.The need for external drivers and other discretecomponents is eliminated with these iCoupler products. Furthermore,iCoupler devices consume one-tenth to one-sixth thepower of optocouplers at comparable signal data rates.The ADuM3200 / ADuM3201 isolators provide two independentisolation channels in a variety of channel configurations anddata rates (see the Ordering Guide). They operate with 3.3 Vor 5 V supply voltages on either side, providing compatibilitywith lower voltage systems as well as enabling voltage translationfunctionality across the isolation barrier. The ADuM3200Wand ADuM3201W are automotive grade versions qualifiedfor 125°C operation.In comparison to the ADuM1200 / ADuM1201 isolators, theADuM3200 / ADuM3201 isolators contain various circuit andlayout changes to provide increased capability relative to system-levelIEC 61000-4-x testing (ESD, burst, and surge). The precisecapability in these tests for either the ADuM1200 / ADuM1201or ADuM3200 / ADuM3201 products is strongly determined bythe design and layout of the user’s board or module. For moreinformation, see the AN-793 Application Note, ESD/Latch-UpConsiderations with iCoupler Isolation Products.Applications Size-critical multichannel isolation SPI interface/data converter isolation RS-232/RS-422/RS-485 transceiver isolation Digital field bus isolation Hybrid electric vehicles, battery monitor

Isolated Precision Gate Driver, 4 A Output Features: 4.0 A peak output current Isolated Working Voltage Secondary side to Input side: 537 V High frequency operation: 1 MHz maximum 3.3 V to 5 V input Logic 4.5V to 18 V output drive UVLO at 2.5 V VDD1 Precise timing characteristics 64 ns maximum isolator and driver Propagation Delay CMOS input logic levels High common-mode transient immunity: >25 kV/µs High junction temperature operation: 125°C Default low output Narrow body, 8-lead SOIC See data sheet for additional features

Dual-Channel Digital Isolator, Enhanced System-Level ESD Reliability Features: Enhanced system-level ESD performance per IEC 61000-4-x High temperature operation: 125°C Default low output Narrow body, RoHS-compliant, 8-lead SOIC Low power operation 5 V operation (refer to data sheet) 3.3 V operation (refer to data sheet) High data rate: dc to 25 Mbps (NRZ) See data sheet for additional featuresADuM3210-EP supports defense and aerospace applications (AQEC standard) Download ADuM3210-EP Data Sheet (pdf) Military temperature range: −55°C to +125°C Controlled manufacturing baseline Enhanced product change notification Qualification data available on request Qualified for automotive applications V62/14627 DSCC Drawing Number

3.75 kV, 6-Channel, SPIsolator Digital Isolator for SPI with Delay Clock Features: Supports up to 40 MHz SPI clock speed in delay clock mode Supports up to 17 MHz SPI clock speed in 4-wire mode 4 high speed, low propagation delay, SPI signal isolation channels 2 data channels at 250 kbps Delayed compensation clock line 20-lead SSOP with 5.1 mm creepage High temperature operation: 125°C High common-mode transient immunity: >25 kV/μs Safety and regulatory approvals UL recognition per UL 1577 3750 V rms for 1 minute CSA Component Acceptance Notice 5A VDE certificate of conformity DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 565 V peak

Robust, Triple Ch. Isolator W/ Output Enable & 1 Reverse Channel Features: High common-mode transient immunity: 100 kV/µs High robustness to radiated and conducted noise Low propagation delay 13 ns maximum for 5 V operation 15 ns maximum for 1.8 V operation 150 Mbps maximum guaranteed data rate Backward compatibility ADuM130E1/ADuM131E1 pin compatible with ADuM1300/ADUM1301 Low dynamic power consumption 1.8 V to 5 V level translation High temperature operation: 125°C Fail-safe high or low options 16-lead, RoHS compliant, SOIC package See data sheet for additional information

The ADuM110N is a single-channel digital isolator based on Analog Devices, Inc., iCoupler® technology. Combining high speed, complementary metal-oxide semiconductor (CMOS) and monolithic air core transformer technology, this isolation component provides outstanding performance characteristics, superior to alternatives such as optocoupler devices and other integrated couplers. The maximum propagation delay is 13 ns with a pulse width distortion of less than 3 ns at 5 V operation.The ADuM110N supports data rates as high as 150 Mbps with a withstand voltage rating of 3.0 kV rms (see the Ordering Guide). The device operates with the supply voltage on either side ranging from 1.8 V to 5 V, providing compatibility with lower voltage systems as well as enabling voltage translation functionality across the isolation barrier.Unlike other optocoupler alternatives, dc correctness is ensured in the absence of input logic transitions. Two different fail-safe options are available, in which the outputs transition to a predetermined state when the input power supply is not applied or the inputs are disabled. The ADuM110N is pin compatible with the ADuM1100.APPLICATIONS General-purpose single-channel isolation Industrial field bus isolation

The ADuM130D/ADuM130E/ADuM131D/ADuM131E are triple-channel digital isolators based on Analog Devices, Inc., iCoupler® technology. Combining high speed, complementary metal-oxide semiconductor (CMOS) and monolithic air core transformer technology, these isolation components provide outstanding performance characteristics superior to alternatives such as optocoupler devices and other integrated couplers. The maximum propagation delay is 13 ns with a pulse width distortion of less than 3 ns at 5 V operation. Channel matching is tight at 3.0 ns maximum.The ADuM130D/ADuM130E/ADuM131D/ADuM131E data channels are independent and are available in a variety of configurations with a withstand voltage rating of 3.75 kV rms (see the Ordering Guide). The devices operate with the supply voltage on either side ranging from 1.8 V to 5 V, providing compatibility with lower voltage systems as well as enabling voltage translation functionality across the isolation barrier.Unlike other optocoupler alternatives, dc correctness is ensured in the absence of input logic transitions. Two different fail-safe options are available, in which the outputs transition to a predetermined state when the input power supply is not applied or the inputs are disabled. The ADuM130E1/ADuM131E1 are pin compatible with the ADuM1300/ADUM1301.Applications General-purpose multichannel isolation Serial peripheral interface (SPI)/data converter isolation Industrial field bus isolation

2.5kV rms Isolated Error Amplifier Features: Stability in isolated feedback applications 0.5% initial accuracy 1% accuracy over the full temperature range Compatible with Type II or Type III compensation networks Reference voltage: 1.225 V Compatible with DOSA Low power operation: <7 mA total Wide voltage supply range VDD1: 3 V to 20 V VDD2: 3 V to 20 V Bandwidth: 400 kHz Isolation voltage: 2.5 kV rms Safety and regulatory approvals UL recognition: 2500 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A VDE certificate of conformity DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 565 V peak Wide temperature range −40°C to +125°C ambient operation 150°C maximum junction temperature Qualified for automotive applications

The ADuM3200 / ADuM3201 are dual-channel, digital isolatorsbased on the Analog Devices, Inc., iCoupler® technology.Combining high speed CMOS and monolithic transformertechnology, these isolation components provide outstandingperformance characteristics superior to alternatives such asoptocoupler devices.By avoiding the use of LEDs and photodiodes, iCouplerdevices remove the design difficulties commonly associatedwith optocouplers. The typical optocoupler concerns regardinguncertain current transfer ratios, nonlinear transfer functions,and temperature and lifetime effects are eliminated with thesimple iCoupler digital interfaces and stable performance characteristics.The need for external drivers and other discretecomponents is eliminated with these iCoupler products. Furthermore,iCoupler devices consume one-tenth to one-sixth thepower of optocouplers at comparable signal data rates.The ADuM3200 / ADuM3201 isolators provide two independentisolation channels in a variety of channel configurations anddata rates (see the Ordering Guide). They operate with 3.3 Vor 5 V supply voltages on either side, providing compatibilitywith lower voltage systems as well as enabling voltage translationfunctionality across the isolation barrier. The ADuM3200Wand ADuM3201W are automotive grade versions qualifiedfor 125°C operation.In comparison to the ADuM1200 / ADuM1201 isolators, theADuM3200 / ADuM3201 isolators contain various circuit andlayout changes to provide increased capability relative to system-levelIEC 61000-4-x testing (ESD, burst, and surge). The precisecapability in these tests for either the ADuM1200 / ADuM1201or ADuM3200 / ADuM3201 products is strongly determined bythe design and layout of the user’s board or module. For moreinformation, see the AN-793 Application Note, ESD/Latch-UpConsiderations with iCoupler Isolation Products.Applications Size-critical multichannel isolation SPI interface/data converter isolation RS-232/RS-422/RS-485 transceiver isolation Digital field bus isolation Hybrid electric vehicles, battery monitor

The ADuM1100 is a digital isolator based on Analog Devices Inc., iCoupler® technology. Combining high speed CMOS and monolithic air core transformer technology, this isolation component provides outstanding performance characteristics superior to alternatives, such as optocoupler devices.Configured as a pin-compatible replacement for existing high speed optocouplers, the ADuM1100 supports data rates as high as 25 Mbps and 100 Mbps.The ADuM1100 operates with a voltage supply ranging from 3.0 V to 5.5 V, boasts a propagation delay of <18 ns and edge asymmetry of <2 ns, and is compatible with temperatures up to 125°C. It operates at very low power, less than 0.9 mA of quiescent current (sum of both sides), and a dynamic current of less than 160 μA per Mbps of data rate. Unlike other optocoupler alternatives, the ADuM1100 provides dc correctness with a patented refresh feature that continuously updates the output signal.The ADuM1100 is offered in three grades. The ADuM1100AR and ADuM1100BR can operate up to a maximum temperature of 105°C and support data rates up to 25 Mbps and 100 Mbps, respectively. The ADuM1100UR can operate up to a maximum temperature of 125°C and supports data rates up to 100 Mbps.APPLICATIONS Digital field bus isolation Opto-isolator replacement Computer-peripheral interface Microprocessor system interface General instrumentation and data acquisition applications

The ADuM3210/ADuM3211 are dual-channel, digital isolators based on Analog Devices, Inc., iCoupler® technology. Combining high speed CMOS and monolithic transformer technology, this isolation component provides outstanding performance characteristics superior to alternatives such as optocoupler devices.By avoiding the use of LEDs and photodiodes, iCoupler devices remove the design difficulties commonly associated with optocouplers. The typical optocoupler concerns regarding uncertain current transfer ratios, nonlinear transfer functions, and temperature and lifetime effects are eliminated with the simple iCoupler digital interfaces and stable performance characteristics. The need for external drivers and other discrete components is eliminated with these iCoupler products. Furthermore, iCoupler devices consume one-tenth to one- sixth the power of optocouplers at comparable signal data rates.The ADuM3210/ADuM3211 isolators provide two independent isolation channels in two channel configurations with data rates up to 25 Mbps (see the Ordering Guide). They operate with 3.3 V or 5 V supply voltages on either side, providing compatibility with lower voltage systems, as well as enabling voltage translation functionality across the isolation barrier. The ADuM3210/ADuM3211 isolators have a default output low characteristic in comparison to the ADuM3200/ADuM3201 models, which have a default output high characteristic. The ADuM3210W and ADuM3211W models are automotive grade versions qualified for 125°C operation.In comparison to the ADuM1200/ADuM1201 isolator, the ADuM3210/ADuM3211 isolators contain various circuit and layout changes providing increased capability relative to system-level IEC 61000-4-x testing (ESD, burst, and surge). The precise capability in these tests for either the ADuM1200/ADuM1201 or ADuM3210/ADuM3211 products is strongly determined by the design and layout of the user’s board or module. For more information, see the AN-793 Application Note, ESD/Latch-Up Considerations with iCoupler Isolation Products.Applications Size-critical multichannel isolation SPI interface/data converter isolation RS-232/RS-422/RS-485 transceiver isolation Digital field bus isolation Gate drive interface Hybrid electric vehicles, battery monitor, and motor driver

The ADuM1100 is a digital isolator based on Analog Devices Inc., iCoupler® technology. Combining high speed CMOS and monolithic air core transformer technology, this isolation component provides outstanding performance characteristics superior to alternatives, such as optocoupler devices.Configured as a pin-compatible replacement for existing high speed optocouplers, the ADuM1100 supports data rates as high as 25 Mbps and 100 Mbps.The ADuM1100 operates with a voltage supply ranging from 3.0 V to 5.5 V, boasts a propagation delay of <18 ns and edge asymmetry of <2 ns, and is compatible with temperatures up to 125°C. It operates at very low power, less than 0.9 mA of quiescent current (sum of both sides), and a dynamic current of less than 160 μA per Mbps of data rate. Unlike other optocoupler alternatives, the ADuM1100 provides dc correctness with a patented refresh feature that continuously updates the output signal.The ADuM1100 is offered in three grades. The ADuM1100AR and ADuM1100BR can operate up to a maximum temperature of 105°C and support data rates up to 25 Mbps and 100 Mbps, respectively. The ADuM1100UR can operate up to a maximum temperature of 125°C and supports data rates up to 100 Mbps.APPLICATIONS Digital field bus isolation Opto-isolator replacement Computer-peripheral interface Microprocessor system interface General instrumentation and data acquisition applications

The ADuM3200 / ADuM3201 are dual-channel, digital isolatorsbased on the Analog Devices, Inc., iCoupler® technology.Combining high speed CMOS and monolithic transformertechnology, these isolation components provide outstandingperformance characteristics superior to alternatives such asoptocoupler devices.By avoiding the use of LEDs and photodiodes, iCouplerdevices remove the design difficulties commonly associatedwith optocouplers. The typical optocoupler concerns regardinguncertain current transfer ratios, nonlinear transfer functions,and temperature and lifetime effects are eliminated with thesimple iCoupler digital interfaces and stable performance characteristics.The need for external drivers and other discretecomponents is eliminated with these iCoupler products. Furthermore,iCoupler devices consume one-tenth to one-sixth thepower of optocouplers at comparable signal data rates.The ADuM3200 / ADuM3201 isolators provide two independentisolation channels in a variety of channel configurations anddata rates (see the Ordering Guide). They operate with 3.3 Vor 5 V supply voltages on either side, providing compatibilitywith lower voltage systems as well as enabling voltage translationfunctionality across the isolation barrier. The ADuM3200Wand ADuM3201W are automotive grade versions qualifiedfor 125°C operation.In comparison to the ADuM1200 / ADuM1201 isolators, theADuM3200 / ADuM3201 isolators contain various circuit andlayout changes to provide increased capability relative to system-levelIEC 61000-4-x testing (ESD, burst, and surge). The precisecapability in these tests for either the ADuM1200 / ADuM1201or ADuM3200 / ADuM3201 products is strongly determined bythe design and layout of the user’s board or module. For moreinformation, see the AN-793 Application Note, ESD/Latch-UpConsiderations with iCoupler Isolation Products.Applications Size-critical multichannel isolation SPI interface/data converter isolation RS-232/RS-422/RS-485 transceiver isolation Digital field bus isolation Hybrid electric vehicles, battery monitor

The ADuM1200 is a dual-channel, digital isolator with 2/0 directionality based on the Analog Devices, Inc., iCoupler® technology. Combining high speed CMOS and monolithic transformer technologies, this isolation component provides outstanding performance characteristics superior to alternatives, such as optocouplers.By avoiding the use of LEDs and photodiodes, iCoupler devices remove the design difficulties commonly associated with optocouplers. The typical optocoupler concerns regarding uncertain current transfer ratios, nonlinear transfer functions, and temperature and lifetime effects are eliminated with the simple iCoupler digital interfaces and stable performance characteristics. The need for external drivers and other discrete components is eliminated with these iCoupler products. Further-more, iCoupler devices consume one-tenth to one-sixth the power of optocouplers at comparable signal data rates.The ADuM120x family of isolators provides two independent isolation channels in a variety of channel configurations and data rates (see the Ordering Guide). Both parts operate with the supply voltage on either side ranging from 2.7 V to 5.5 V, providing compatibility with lower voltage systems as well as enabling a voltage translation functionality across the isolation barrier. In addition, the ADuM120x provide low pulse width distortion (<3 ns for CR grade) and tight channel-to-channel matching (<3 ns for CR grade). Unlike other optocoupler alternatives, the ADuM120x isolators have a patented refresh feature that ensures dc correctness in the absence of input logic transitions and during power-up/power-down conditions.ADuM1200W and ADuM1201W are automotive grade versions qualified for 125°C operation per AEC-Q100. See the Automotive Products section for more details.Applications Size-critical multichannel isolation SPI interface/data converter isolation RS-232/RS-422/RS-485 transceiver isolation Digital field bus isolation Hybrid electric vehicles, battery monitor, and motor driveThe ADuM1200-EP supports defense and aerospace applications (AQEC)

The ADuM3200 / ADuM3201 are dual-channel, digital isolatorsbased on the Analog Devices, Inc., iCoupler® technology.Combining high speed CMOS and monolithic transformertechnology, these isolation components provide outstandingperformance characteristics superior to alternatives such asoptocoupler devices.By avoiding the use of LEDs and photodiodes, iCouplerdevices remove the design difficulties commonly associatedwith optocouplers. The typical optocoupler concerns regardinguncertain current transfer ratios, nonlinear transfer functions,and temperature and lifetime effects are eliminated with thesimple iCoupler digital interfaces and stable performance characteristics.The need for external drivers and other discretecomponents is eliminated with these iCoupler products. Furthermore,iCoupler devices consume one-tenth to one-sixth thepower of optocouplers at comparable signal data rates.The ADuM3200 / ADuM3201 isolators provide two independentisolation channels in a variety of channel configurations anddata rates (see the Ordering Guide). They operate with 3.3 Vor 5 V supply voltages on either side, providing compatibilitywith lower voltage systems as well as enabling voltage translationfunctionality across the isolation barrier. The ADuM3200Wand ADuM3201W are automotive grade versions qualifiedfor 125°C operation.In comparison to the ADuM1200 / ADuM1201 isolators, theADuM3200 / ADuM3201 isolators contain various circuit andlayout changes to provide increased capability relative to system-levelIEC 61000-4-x testing (ESD, burst, and surge). The precisecapability in these tests for either the ADuM1200 / ADuM1201or ADuM3200 / ADuM3201 products is strongly determined bythe design and layout of the user’s board or module. For moreinformation, see the AN-793 Application Note, ESD/Latch-UpConsiderations with iCoupler Isolation Products.Applications Size-critical multichannel isolation SPI interface/data converter isolation RS-232/RS-422/RS-485 transceiver isolation Digital field bus isolation Hybrid electric vehicles, battery monitor

Dual-Channel, Digital Isolator, Enhanced System-Level ESD Reliability Features: Enhanced system-level ESD performance per IEC 61000-4-x High temperature operation: 125°C Narrow body, RoHS-compliant, 8-lead SOIC Low power operation 5 V operation (refer to data sheet) 3.3 V operation (refer to data sheet) Bidirectional communication 3.3 V/5 V level translation See data sheet for additional featuresADuM3200-EP supports defense and aerospace applications (AQEC standard) Download ADuM3200-EP Data Sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline Enhanced product change notification Qualification data available on request Qualified for automotive applications Automotive versions qualified per AEC-Q100 V62/14627 DSCC Drawing Number

The ADuM3100 is a digital isolator based on the Analog Devices, Inc. iCoupler® technology. Combining high speed CMOS and monolithic transformer technology, this isolation component provides outstanding performance characteristics superior to alternatives, such as optocoupler devices.Configured as a pin-compatible replacement for existing high speed optocouplers, the ADuM3100 supports data rates as high as 25 Mbps and 100 Mbps.The ADuM3100 operates with a voltage supply ranging from 3.0 V to 5.5 V, boasts a propagation delay of <18 ns and an edge asymmetry of <2 ns, and is compatible with temperatures up to 105°C. It operates at very low power, less than 2.0 mA of quiescent current (sum of both sides), and a dynamic current of less than 160 μA per Mbps of data rate. Unlike other optocoupler alternatives, the ADuM3100 provides dc correctness with a patented refresh feature that continuously updates the output signal.The ADuM3100 is offered in two grades. The ADuM3100AR and ADuM3100BR can operate up to a maximum temperature of 105°C and support data rates up to 25 Mbps and 100 Mbps, respectively.In comparison to the ADuM1100 digital isolator, the ADuM3100 contains various circuit and layout changes to provide increased capability relative to system-level IEC 61000-4-× testing (ESD/burst/surge). The precise capability in these tests for either the ADuM1100 or ADuM3100 is strongly determined by the design and layout of the user’s board or module. For more information, see Application Note AN-793, ESD/Latch-Up Considerations with iCoupler® Isolation Products.APPLICATIONS Digital fieldbus isolation Opto-isolator replacement Computer-peripheral interface Microprocessor system interface General instrumentation and data acquisition