Search results for: AD7327BRUZ-REEL

The AD73271 is an 8-Channel, 12-Bit plus Sign Successive Approximation ADC designed on the iCMOS (industrial CMOS) process. iCMOS is a process combining high voltage silicon with submicron CMOS and complementary bipolar technologies. It enables the development of a wide range of high performance analog ICs capable of 33 V operation in a footprint that no previous generation of high voltage parts could achieve. Unlike analog ICs using conventional CMOS processes, iCMOS components can accept bipolar input signals while providing increased performance, dramatically reduced power consumption, and reduced package size.The AD7327 can accept true bipolar Analog Input signals. The AD7327 has four software selectable inputs Ranges, ±10 V, ±5 V, ±2.5 V and 0 to 10 V. Each analog input channel can be independently programmed to one of the four input ranges. The Analog input channels on the AD7327 can be programmed to be Single-Ended, true Differential or Pseudo Differential.The ADC contains a 2.5 V Internal reference. The AD7327 also allows for external Reference operation. If a 3 V reference is applied the REFIN/OUT pin the AD7327 can accept a true Bipolar ±12V Analog Input. VDD and VSS supplies of ±12V are required for the ±12 V Input Range. The ADC has a high speed serial interface that can operate at throughput rates up to 500 kSPS.Product Highlights The AD7327 can accept True Bipolar Analog Input signals, ±10 V, ±5 V, ±2.5 V and 0 to 10 V unipolar signals. The Eight Analog Inputs can be configured as 8 Single-Ended inputs, 4 True Differential, 4 Pseudo Differential or 7 Pseudo Differential Inputs. The ADC has a high speed serial interface that can operate at throughput rates up to 500 kSPS. Low power, 18 mW, at a maximum throughput rate of 500 kSPS. Channel Sequencer.

Analog to Digital Converters - ADC 8-Channel,12-Bit +Sign Bipolar Input ADC, Restricted Availability

The AD73271 is an 8-Channel, 12-Bit plus Sign Successive Approximation ADC designed on the iCMOS (industrial CMOS) process. iCMOS is a process combining high voltage silicon with submicron CMOS and complementary bipolar technologies. It enables the development of a wide range of high performance analog ICs capable of 33 V operation in a footprint that no previous generation of high voltage parts could achieve. Unlike analog ICs using conventional CMOS processes, iCMOS components can accept bipolar input signals while providing increased performance, dramatically reduced power consumption, and reduced package size.The AD7327 can accept true bipolar Analog Input signals. The AD7327 has four software selectable inputs Ranges, ±10 V, ±5 V, ±2.5 V and 0 to 10 V. Each analog input channel can be independently programmed to one of the four input ranges. The Analog input channels on the AD7327 can be programmed to be Single-Ended, true Differential or Pseudo Differential.The ADC contains a 2.5 V Internal reference. The AD7327 also allows for external Reference operation. If a 3 V reference is applied the REFIN/OUT pin the AD7327 can accept a true Bipolar ±12V Analog Input. VDD and VSS supplies of ±12V are required for the ±12 V Input Range. The ADC has a high speed serial interface that can operate at throughput rates up to 500 kSPS.Product Highlights The AD7327 can accept True Bipolar Analog Input signals, ±10 V, ±5 V, ±2.5 V and 0 to 10 V unipolar signals. The Eight Analog Inputs can be configured as 8 Single-Ended inputs, 4 True Differential, 4 Pseudo Differential or 7 Pseudo Differential Inputs. The ADC has a high speed serial interface that can operate at throughput rates up to 500 kSPS. Low power, 18 mW, at a maximum throughput rate of 500 kSPS. Channel Sequencer.

Analog to Digital Converters - ADC 8-Channel,12-Bit +Sign Bipolar Input ADC, Restricted Availability

2-Channel, 10 V Input Range, High Throughput, 24-Bit Sigma-Delta ADC Features: High resolution ADC 24 bits no missing codes ±0.0015% nonlinearity 3-wire serial interface SPI®, QSPI™, MICROWIRE™, and DSP compatible Schmitt trigger on logic inputs Single-supply operation 5 V analog supply 3 V or 5 V digital supply Package: 28-lead TSSOP Optimized for fast channel switching 18-bit p-p resolution (21 bits effective) at 500 Hz 16-bit p-p resolution (19 bits effective) at 2 kHz 14-bit p-p resolution (18 bits effective) at 15 kHz On-chip per channel system calibration 2 fully differential analog inputs Input ranges +5 V, ±5 V, +10 V, ±10 V Overvoltage tolerant Up to ±16.5 V not affecting adjacent channel Up to ±50 V absolute maximum

1 MSPS , 8-Channel, Software Selectable True Bipolar Input, 12-Bit Plus Sign A/D Converter Features: 12-Bit Plus Sign SAR ADC Accepts True Bipolar Analog Inputs Software Selectable input Ranges: ±10V, ±5V, ±2.5V, 0 to 10 V Eight Analog Input Channels with Channel Sequencer Single Ended, True Differential and Pseudo Differential Analog Input Capability High Impedance Analog Inputs Low Power: 21 mW High Speed Serial Interface SPI/QSPI/DSP/MICROWIRE Compatible MuxOUT and ADCIN pins allows separate access to Mux and ADC iCMOS™ Process Technology 24 Lead TSSOP package

3 V/5 V, 2 MSPS, 8-Bit, 1-/4-/8-Channel Sampling ADCs Features: 8-bit half-flash ADC with 420 ns conversion time 1, 4 and 8 Single-Ended Analog Input Channels Available with Input Offset Adjust On-Chip Track-and-Hold SNR Performance Given for Input Frequencies Up to 10 MHz Automatic Power-Down at the End of Conversion On-Chip Reference (2.5 V) Wide Operating Supply Range 3 V ± 10% and 5 V ± 10% Input Ranges: 0 V to 2 Vp-p, VDD = 3 V ± 10% 0 V to 2.5 Vp-p, VDD = 5 V ± 10% Flexible Parallel Interface with EOC Pulse to Allow Stand-Alone Operation

The AD7322 is a 2-channel, 12-bit plus sign, successive approximation analog-to-digital converter (ADC) designed on the iCMOS™ (industrial CMOS) process. iCMOS is a process combining high voltage silicon with submicron CMOS and complementary bipolar technologies. It enables the development of a wide range of high performance analog ICs capable of 33 V operation in a footprint that no previous generation of high voltage parts could achieve. Unlike analog ICs using conventional CMOS processes, iCMOS components can accept bipolar input signals while providing increased performance, dramatically reduced power consumption, and reduced package size.The AD7322 can accept true bipolar analog input signals. The AD7322 has four software-selectable input ranges, ±10 V, ±5 V, ±2.5 V, and 0 V to +10 V. Each analog input channel can be independently programmed to one of the four input ranges. The analog input channels on the AD7322 can be programmed to be single-ended, true differential, or pseudo differential.The ADC contains a 2.5 V internal reference. The AD7322 also allows for external reference operation. If a 3 V reference is applied to the REFIN/OUT pin, the AD7322 can accept a true bipolar ±12 V analog input. Minimum ±12 V VDD and VSS supplies are required for the ±12 V input range. The ADC has a high speed serial interface that can operate at throughput rates up to 1 MSPS.PRODUCT HIGHLIGHTS The AD7322 can accept true bipolar analog input signals, ±10 V, ±5 V, and ±2.5 V, and 0 V to +10 V unipolar signals. The two analog inputs can be configured as two single-ended inputs, one true differential input, or one pseudo differential input. 1 MSPS serial interface. SPI-/QSPI™-/DSP-/MICROWIRE™-compatible interface. Low power, 31 mW maximum, at 1 MSPS throughput rate. Channel sequencer.

The AD7923 is a 12-bit, high speed, low power, 4-channel, successive-approximation (SAR) ADC. It operates from a single 2.7 V to 5.25 V power supply and features throughput rates up to 200 kSPS. It contains a low noise, wide bandwidth track-and-hold amplifier that can handle input frequencies in excess of 8 MHz.The conversion process and data acquisition are controlled by CS and the serial clock signal, allowing the device to easily interface with microprocessors or DSPs. The input signal is sampled on the falling edge of CS and conversion is also initiated at this point.The AD7923 uses advanced design techniques to achieve very low power dissipation at maximum throughput rates. At maximum throughput rates, it consumes 1.2 mA maximum with 3 V supplies and 1.5 mA maximum with 5 V supplies.Through the configuration of the control register, the analog input range can be selected as 0 V to REFIN or 0 V to 2 × REFIN, with either straight binary or twos complement output coding. The AD7923 features four single-ended analog inputs with achannel sequencer to allow a preprogrammed selection of channels to be converted sequentially.The conversion time for the AD7923 is determined by the serial clock, SCLK, frequency, since this is used as the master clock to control the conversion. The conversion time can be as short as 800 ns with a 20 MHz SCLK.

500 kSPS, 2-Channel, Software-Selectable, True Bipolar Input, 12-Bit Plus Sign ADC Features: 12-bit plus sign SAR ADC True bipolar input ranges Software-selectable input ranges: ±10 V, ±5 V, ±2.5 V, 0 V to +10 V 2 analog input channels with channel sequencer Single-ended, true differential, and pseudo differential analog input capability 500 kSPS throughput rate High analog input impedance Low power: 18 mW Full power signal bandwidth: 22 MHz Internal 2.5 V reference High speed serial interface See data sheet for additional features

Software Selectable True Bipolar Input, 4-Channel, 12-Bit Plus Sign A/D Converter Features: 12-Bit plus sign SAR ADC True bipolar input ranges Software-selectable input ranges ± 10V, ± 5V, ± 2.5V, 0V to 10V 1 MSPS throughput rate 4 analog input channels with channel sequencer Single -ended, true differential, and Pseudo differential analog input capability High analog input impedance Low power: 21 mW Full power signal bandwidth: 22 MHz Internal 2.5 V reference High speed serial interface For more features please see data sheet

The AD7927 is a 12-bit, high speed, low power, 8-channel, successive approximation ADC. The part operates from a single 2.7 V to 5.25 V power supply and features throughput rates up to 200 kSPS. The part contains a low noise, wide bandwidth track-and-hold amplifier that can handle input frequencies in excess of 8 MHz.The conversion process and data acquisition are controlled using CS and the serial clock signal, allowing the device to easily interface with microprocessors or DSPs. The input signal is sampled on the falling edge of CS and the conversion is also initiated at this point. There are no pipeline delays associated with the part.The AD7927 uses advanced design techniques to achieve very low power dissipation at maximum throughput rates. At maximum throughput rates, the AD7927 consumes 1.2 mA maximum with 3 V supplies; with 5 V supplies, the current consumption is 1.5 mA maximum.Through the configuration of the control register, the analog input range for the part can be selected as 0 V to REFIN or 0 V to 2 × REFIN, with either straight binary or twos complement output coding. The AD7927 features eight single-ended analog inputs with a channel sequencer to allow a preprogrammed selection of channels to be converted sequentially.The conversion time for the AD7927 is determined by the SCLK frequency, as this is also used as the master clock to control the conversion. The conversion time may be as short as 800 ns with a 20 MHz SCLK.PRODUCT HIGHLIGHTS High Throughput with Low Power Consumption. The AD7927 offers up to 200 kSPS throughput rates. At the maximum throughput rate with 3 V supplies, the AD7927 dissipates 3.6 mW of power maximum. Eight Single-Ended Inputs with a Channel Sequencer. A consecutive sequence of channels can be selected on which the ADC cycles and converts. Single-Supply Operation with VDRIVE Function. The AD7927 operates from a single 2.7 V to 5.25 V supply. The VDRIVE function allows the serial interface to connect directly to either 3 V or 5 V processor systems independent of AVDD. Flexible Power/Serial Clock Speed Management. The conversion rate is determined by the serial clock, allowing the conversion time to be reduced through the serial clock speed increase. The part also features various shutdown modes to maximize power efficiency at lower throughput rates. Current consumption is 0.5 μA maximum when in full shutdown. No Pipeline Delay. The part features a standard successive approximation ADC with a CS input pin, which allows for accurate control of each sampling instant.

Software Selectable, True Bipolar Input, 8-Channel, 12-Bit Plus Sign A/D Converter Features: 12-Bit plus Sign SAR ADC True Bipolar Input Ranges Software Selectable Input Ranges: ± 10V, ± 5V, ± 2.5V, 0 to 10V Eight Analog Input Channels with Channel Sequencer Single Ended, True Differential and Pseudo Differential Analog Input Capability High Analog Input Impedance Low Power: 26 mW Full Power Signal Bandwidth: >13 MHz Internal 2.5 V Reference High Speed Serial Interface - 1 MSPS Throughput For four and two channel equivalent devices, see AD7324, AD7322

8-Channel, 1 MSPS, 12-Bit ADC with Sequencer in 20-Lead TSSOP Features: Fast throughput rate: 1 MSPS Specified for AVDD of 2.7 V to 5.25 V Low Power: 6.0 mW max at 1 MSPS with 3 V supply 13.5 mW max at 1 MSPS with 5 V supply Eight (single-ended) inputs with sequencer Wide input bandwidth: AD7928, 70 dB min SINAD at 50 kHz input frequency Flexible power/serial clock speed management No pipeline delays High speed serial interface SPI®/QSPI™/MICROWIRE™/DSP compatible

500 kSPS, 4-Channel, Software Selectable True bipolar Input, 12-Bit Plus Sign A/D Converter Features: 12-bit plus sign SAR ADC True bipolar input ranges Software-selectable input ranges ±10 V, ±5 V, ±2.5 V, 0 V to +10 V 500 kSPS throughput rate Four analog input channels with channel sequencer Single-ended, true differential, and pseudo differential analog input capability High analog input impedance Low power: 18 mW Full power signal bandwidth: 22 MHz Internal 2.5 V reference High speed serial interface Power-down modes 16-lead TSSOP package iCMOS process technology

2.5 V/3.3 V, 16-Bit, 2-Port Level Translating, Bus Switch Features:225 ps Propagation Delay through the Switch 4.5 Ω Switch Connection between Ports Data Rate 1.244 Gbps 2.5 V/3.3 V Supply Operation Selectable Level Shifting/Translation Small Signal Bandwidth 610 MHzLevel Translation 3.3 V to 2.5 V 3.3 V to 1.8 V 2.5 V to 1.8 V 38-Lead TSSOP Package

12 Bit Analog to Digital Converter 4, 7, 8 Input 1 SAR 20-TSSOP

+2.5 V to 5.5 V, 400 A, Quad Rail-To-Rail Output 12-Bit DAC Features: Four 12-Bit DACS in 16-Lead TSSOP Low Power: 500 µA @ 5 V, 400 µA @ 3 V Power-Down to 300 nA @ 5 V, 90nA @ 3 V Guaranteed Monotonic by Design Power-On-Reset to Zero Volts Double-Buffered Input Logic Low Power, SPI™, QSPI™, MICROWIRE™ and DSP-Compatible 3-Wire Serial Interface Output Range: O-VREF or O-2VREF Simultaneous Update of DAC Outputs via LDAC pin (active low) Asynchronous Clear Facility via CLR pin (active low) SDO Daisy-Chaining Option Buffered/Unbuffered Reference Input Options for each DAC pair

500 kSPS, 2-Channel, Software-Selectable, True Bipolar Input, 12-Bit Plus Sign ADC Features: 12-bit plus sign SAR ADC True bipolar input ranges Software-selectable input ranges: ±10 V, ±5 V, ±2.5 V, 0 V to +10 V 2 analog input channels with channel sequencer Single-ended, true differential, and pseudo differential analog input capability 500 kSPS throughput rate High analog input impedance Low power: 18 mW Full power signal bandwidth: 22 MHz Internal 2.5 V reference High speed serial interface See data sheet for additional features

The AD7329 is an 8-Channel, 12-Bit Plus Sign Successive Approximation ADC. The ADC has a high-speed serial interface that can operate at throughput rates up to 1 MSPS. The ADC has a high-speed serial interface that can operate at throughput rates up to 250 kSPS.The AD7329 can accept True Bipolar Analog input signals. The Ad7329 has four software selectable ranges, ±10 V, ±5 V, ±2.5 V and 0 to 10 V. Each analog input channel can be independently programmed to one of the input ranges by setting the appropriate bits in the Range Registers.The Analog Input Channels can be configured as single ended, fully differential or pseudo differential. Dedicated Control Register bits are used to configure the Analog inputs.The ADC contains a 2.5 V Internal reference. The AD7329 also allows for external Reference operation. If a 3 V external reference is applied to the REFIN/OUT pin, the ADC can handle a True Bipolar ± 12 V Analog input range. VDD and VSS supplies of ± 12 V are required for this ± 12 V input range.The AD7329 has multiplexer output pins and ADC input pins. These allow the user to insert buffers, differential amplifiers or antialiasing filters, if required, between the Multiplexer and the ADC. This means that for eight analog inputs only a single driver is required for the AD7329.The AD7329 has a number of power down mode to reduce power consumption at lower throughput rates.PRODUCT HIGHLIGHTS The AD7329 can accept True Bipolar Analog Input signals, ±10V, ±5V, ±2.5V and 0 to 10V unipolar signals. The Eight Analog Inputs can be configured as 8 Single-Ended inputs, 4 True Differential, 4 Pseudo Differential or 7 Pseudo Differential Inputs. SPI/QSPI/DSP/MICROWIRE compatible Interface. Low Power, TBD mW at maximum throughput rate. Channel Sequencer