Search results
TBS DISCOVERY PRO
Team BlackSheep
The TBS DISCOVERY PRO gimbal frame is the perfect frame for amateur and pro aerial videographers. Sporting a fully stabilized camera Gimbal with extremely compact dimensions it is the most powerful, robust and versatile "take anywhere" quadrocopter available to date.
Incredible Flight Time
We've been working hard on improving the flight time of the TBS DISCOVERY (PRO) lineup. While a lot of people love our DISCOVERYs for their super-steady handling and insane speed envelope, it was hard to get the flight time near or beyond the 20 minute mark.
With the 6S 4000mAh battery flight times of 25mins (T-Motor Props 15x5) or 23mins (RCTimer 15x6.5) are possible with a fully-equipped TBS DISCOVERY PRO. The regular DISCO will fly even longer. With a 2nd or even a 3rd battery (yes, the motors handle that with ease) you can fly 37 or 45mins respectively. The sky is the limit.
Long-Range Capable
Team BlackSheep are the undisputed kings of long range FPV. With the DISCOVERY PRO you can make camera shots that rival those of real helicopters. You can chase BMX drivers down an entire slope. You can film boats and yachts ... from the shore. You can shoot breathtaking action scenes from the director's seat! Since you're piloting from the camera view, your skill is the limit.
To fly further, we offer the EzUHF Tx & Rx long range control system and the Lawmate 2.4GHz long range video system. Compatible with all remote controls! With the 11dBi Yagi ranges of 10km or more are easily achieved. The battery life now is your limit.
Built-in Stabilized Gimbal
Setting up a gimbal the right way can be a daunting task. Installing a brushless gimbal board and making the wiring work in your favor is difficult. Therefore we decided to license the SimpleBGC firmware and the SimpleBGC hardware layout from Viacopter. This is a world's first ... the gimbal controller fully embedded into the frame. No soldering, no software configuration, plug in the motors and you're good to go. The embedded USB port connects to your PC for future firmware upgrades and custom configs.
Integrated TBS Core
The CORE has won over the FPV enthusiasts world wide and as the easiest to use OSD module. Clean data layout and only the most important information presented on screen. Clutter-free, permanently visible, zero wires for installation, and nicely tucked away under a tin shield. The most robust and secure solution for on screen telemetry.
The TBS CORE is famous for:
- Accurate flight pack voltage and mAh consumption display
- Reliable power supply for FPV camera and transmitter
- Flight time shown once a minute
- Display RSSI (R/C signal strength) from all major UHF systems and some regular R/C systems
- Single battery FPV system - less chance of failure!
TBS VENDETTA
Team BlackSheep
Full carbon fiber monocoque, quick swap arms, solder-free repairs, ready to fly as 240 size fpv racer, for 5" props. But it doesn't stop there! Sporting the brand new TBS Triumph Antenna in combination with the TBS CORE Pro OSD and TBS Unify Pro VTX, the TBS Vendetta allows you to configure every parameter of your FPV racer via R/C stick commands! Each drone comes tuned and test-flown by our professional tuning expert, Magnus. Install a receiver, strap on a 4S battery and the TBS VENDETTA will tear a hole into the sky, and you're coming along for the ride!
Carbon fiber all the way
All structural parts on the TBS VENDETTA are made out of custom-made carbon fiber layup. The arms are made from flat 3.5mm thick carbon fiber plates, machined to precise standards on a 4-axis CNC machine, fully chamfered to prevent delamination. The body is a pure work of art, which starts its life as a hand molded tubular 2mm carbon fiber master. It is trimmed down by a 4-axis CNC machine to save weight. Smooth and rounded edges in the CNC cuts are our way of showing off. The matte finish is sand blasted, because attention to detail requires it.
Tight integration, modular design
The entire FPV racer is built around the idea of countless self-contained parts working together hand in hand for a unified user experience. Starting from the TBS ZeroZero FPV camera, to the TBS POWERCUBE and TBS CORE PRO, everything is repairable without a soldering iron, and with just two tools. This does not prevent you from configuring all tuning parameters via the built-in OSD, to changing VTx channels or power levels.
From box to air: 5 minutes
The TBS VENDETTA comes pre-tuned, and the R/C Calibration Wizard takes you through the setup steps. Just strap in a R/C receiver, tune your goggles to BOSCAM A CH1, and start setting up your controls (both R/C receiver, goggles and FPV video receivers are sold separately). The arms arrive in detached state to allow quick access to the R/C receiver bay the first time.
Built to grow
From the structural rigidity to the over-powered ESCs, everything has been developed with your progress as a pilot in mind. A step to 6S with bigger motors to gain ridiculous power-to-weight ratios, custom arms for higher efficiency motors and props, or simply a different motor setup to suit your tastes are easily possible, thanks to the MT30 connectors and the quick swap arms. You can even carry different pairs of arms with unique motor and props combos installed for every occasion, and mount what you fancy!
Features:
- 240-sized RTF FPV Racer
- Quick-replace 3.5mm carbon fiber arms, MT30 connectors
- Cobra CM2204/2300kV Motors, HQ 5x4x3 Props
- TBS PowerCube with fastest F3 board available, 2-6S capable Bulletproof 30/50A ESCs
- Compatible with PPM, SBUS, XBUS, Spektrum R/C systems
- Fully configurable via OSD, no PC required
- GoPro 3/4 and Mobius / Runcam mount included, both 10 and 30 degree variations
- Lost model alarm
- 410g weight without Battery or HD camera