Search results

The Artemis 300 Desktop 3D printer is a full featured almost ready to print (ARP) printer. The Artemis 300 requires only some assembly out of the box and features a 32 bit controller with WiFi, a huge build volume, auto leveling, and more.

The Artemis 300 features an all new rigid metal frame construction and 350W AC heated bed with aluminum heat spreader. Easy to achieve 120C bed temperature if needed. The motion system of the Artemis consists of precision linear bearing rails for rigid precise control and allows for faster rapids. The Artemis moves nearly twice as fast during rapid moves which is made possible by the 32 bit motion control board and powerful stepper drivers. Auto leveling and WiFi control are standard features on this machine.

The Almost-Ready-to-Print (ARP) kit is a partially factory assembled machine. We do all the tricky stuff, just the way we like, and leave the final assembly up to you. Bolt together a few major components, plug in wires, and connect. A few hours to the first print. The ARP machines will save big dollars on shipping. Also available fully assembled.

Features:

• 32 bit DUET WiFi control board
• Auto Level / Auto Calibration
• WiFi Control
• Linear Rail Motion
• AC 350W Heated Bed
• Aluminum Heat Spreader
• SE300 Hotend with built in probe sensor
• Triple part cooling blowers (GCODE Controlled)
• 0.9 degree NEMA 17 Stepper Motors
• 16 Tooth Pulleys
• Powder-Coated Sheet Metal Base/Upper Enclosure
• Heavy Duty 1x2 T-Slot Extrusion Towers
• 310mm Borosilicate Glass Build Plate
• Injection Molded Plastic Components

This is a DIY KIT Printer. Don't let that scare you though, it's a really fun build!

Our H2 3D Printer kit is ready for all you builders and modders out there. Featuring genuine UltiMachine electronics along with our auto-level probing HE280 Hotend, both included standard. This kit comes complete with everything to build minus your tools and time.

Once you've initially built your H2, we've also included all the hardware to mount the 3D printable files from our Github page, even bearings and bolts for a printed spool holder. We have included two different length sets of delta arms to allow you to expand your print area later or print taller narrower parts right out of the box. The 290mm arms give an approximately 200mm printable diameter and 175mm height. Or use the 178mm arms to give your H2 approximately 140mm in diameter and 295mm height.

Includes a 90w power supply that delivers plenty of power for running your H2 stock, but if you want to mod your machine to add a heated bed, you'll need to provide a larger power supply similar to what we use on other machines. Speaking of modding, you'll be happy to know that most of the parts are interchangeable between our Orion and the H2 (think about the heated bed).

What's in the box:

• All hardware for assembly
• HE280 Hotend w/accelorometer probe
• EZR Struder
• 90w power supply
• 220mm boroscillicate glass build plate
• 2 sets of delta arms for different printer configurations
• high torque NEMA 17 motors
• UltiMachine mini-RAMBo electronics
• Extra hardware for mounting printable addons and spool holders

Are you a student, teacher, beginning maker, or tinkerer? Or are you just someone wanting to get involved with 3D printing without breaking the bank? Then the ERIS® is the machine for you. With a build area of over 4.9" (124mm) in diameter and 6-1/2" (165mm) tall, it packs a lot of print size in a small and portable package.

Don't let the small size and price tag fool you though! It has features that even some of the much more expensive machines don't have. Our hardened and treated linear motion system will never need replacing or maintenance. Featuring our new quick change HE280 hotend and nozzle system the ERIS® allows you to simply unplug one connector, pop off the ball joint arms and replace the whole platform with an entirely different hotend. The new HE280 hotend platform totally simplifies the process of changing the business end of your 3D printer. The HE280 features a unique accelerometer probe design to calibrate the machine automatically in just a little over a minute. Changing nozzles, or the entire hotend, is easily achieved and fun to watch. We're confident you'll find our innovative metal HE280 hotend enjoyable to use.

The ERIS® is the first in our new line of 3D Printers to be a truly RTP™ (ready-to-print) 3D printer. From opening the box and unpacking the included tools and cables to plugging in the power and USB and launching the software you should be able to be up and printing in a matter of minutes. The software comes with a few files already prepared to get you printing so you can take your time reading the manual and learning all about your new ERIS® Delta 3D printer.

The build plate of the ERIS® Delta is easily removable and is held down with 3 rotating bed clips and an easy access notch to help lift it off the base. All ERIS® Delta's ship with a borosilicate glass build plate with a custom build surface laminate pre-installed. This build surface makes printing with PLA, PETG and other materials such as the blended PLA's a breeze! No mess, no cleaning glue or tape off the bed or prints. However, if you've ever used any of the other methods for part adhesion and want to try them out on your ERIS® Delta, simply flip the hold down clamps and turn the bed over and you've got a perfectly flat boro glass plate to work with too!

Features:

• Convenient carry handle
• RTP™ (ready-to-print) out of the box
• Uses 1.75mm Non-Proprietary Filament
• Spool holder accomodates most available filament spools
• Build volume of over 4.9" dia x 6.5" tall
• High quality plastics and composite frame
• Build surface passive heated plastic laminated glass
• HE280 metal hotend with acceleromter probe (Limited to 240c for ERIS® Safety)
• Built-in probe provides true automatic calibration
• Mini-RAMBo 3D printer control board by UltiMachine
• USB connection, Windows and MAC compatible
• Machine overall dimensions (no filament spool) 9-1/2" (240mm) dia x 17-1/2" (444mm)
• Shipping dimensions 13" x 13" x 23" tall (330mm x 330mm x 584mm tall)
• Shipping weight (includes 1 lb (0.5kg) spool of filament: 13.8lb (5.81kg)
• Power requirements 100-240VAC 50-60Hz 2Amp

The RostockMAX v3.2 features a 32 bit Duet Wifi controller and our new SeeMeCNC SE300 hotend. A quiet, smooth, and precise motion with superior cooling design of the SE300. The v3.2 is QUIET, about 1/4 the noise level of all previous RostockMAX and Orion 3D printers. The printer is so quiet you won't mind it sitting in the office where you work! The SMOOTH motion is a combination of the 32 bit control board, 0.9 degree stepper motors, and our unique Cheapskate linear motion design. Layers PRECISE and clean. And the rock solid EZR Struder is now driven with a 0.9 degree stepper to provide fine control over filament extrusion. The SE300 has triple blowers and a new thermistor cartridge that plug into the SE300 pcb for easy maintenance.

Features:

• About 1/4 the noise level
• 32 bit WiFi Duet Controller
• Browser Control from your PC or MAC or phone or tablet
• Auto bed leveling through SE300 probe
• Heated Bed with borocillicate glass build plate
• fine 0.9 degree axis stepper motors
• standard 0.5mm diameter nozzle
• EZR Struder cold end filament feeder with 0.9 degree stepper

Printer specifications:

• WiFi Control, USB required for setup
• Print Area 275mm Dia x 385mm H
• Minimum Capable Layer Height with 0.5mm nozzle of 0.08mm
• Maximum Recommended Layer Height with .5mm nozzle of .4mm
• Power Requirements 110v or 220v (input power selectable) @ 350 watts
• Maximum Onyx Heated Bed Temp 100C
• Max Hotend Temp 280C
• Max Recommended Printing Speed @.2mm Layer Height 100mm/s
• Max Travel Speed 300mm/s
• Printer overall size without spool 430mmW x 410mmL x 910mmH
• Printer overall size with spool on top 430mmW x 410mmL x 1130mmH

Options:

• Touchscreen Controller with SD Card Reader
• nozzles brass and stainless diameters 0.4mm, 0.7mm, 1.0mm
• add-on second extruder for v3.2 and dual extrusion

DESKTOP 3D PRINTER KIT: FROM IT'S HUGE BUILD VOLUME TO THE AMAZING COMMUNITY OF BUILDERS YOU'LL QUICKLY LEARN WHY SO MANY PEOPLE HAVE CHOSEN THE ROSTOCK MAX V2 AS THEIR GO-TO MACHINE. FROM FIRST TIME BUILDERS TO SEASONED ENTHUSIASTS IT HAS EVERYTHING YOU'LL NEED TO GET INVOLVED IN 3D PRINTING. FROM THE LASERCUT FRAMEWORK TO HIGH QUALITY INJECTION MOLDED PARTS IT'S BUILT TO LAST TOO.

DESKTOP 3D PRINTER: GET STARTED FAST WITH YOUR OWN DESKTOP 3D PRINTER FROM SEEMECNC. WITH MORE STANDARD FEATURES INCLUDING A HEATED BUILD SURFACE FOR MULTI-MATERIAL CAPABILITY, STANDALONE PRINTING WITH THE INCLUDED SD AND LCD CONTROL