Search results

The NanoPi M1 is an Allwinner H3 based ARM board designed and released by FriendlyARM for hobbyists, makers and electronic fans. It is only two thirds the size of the Raspberry Pi. It is open source. It works with Ubuntu MATE, Debian and etc.

The NanoPi M1 uses the Allwinner H3 Soc. It integrates Ethernet, IR receiver, video/audio output and supports HDMI and AVOUT. It can be powered via the MicroUSB port.

In such a small board it still integrates rich interfaces and ports. Besides the popular HDMI, Ethernet, USB-Host, USB-OTG, DVP camera interface and AVOUT (audio and video) it has an onboard Microphone, IR receiver, a serial debug port and a Raspberry Pi compatible 40 pin GPIO pin header.

Features:

• CPU: Allwinner H3, Quad-core Cortex-A7@1.2GHz
• GPU: Mali400MP2@600MHz，Supports OpenGL ES2.0
• DDR3 RAM: 512MB/1GB
• Connectivity: 10/100M Ethernet
• Audio: 3.5mm audio jack/Via HDMI
• Microphone: Onboard microphone
• IR Receiver: Onboard IR receiver
• USB Host：Type A, USB 2.0 x 3
• MicroSD Slot x 1
• MicroUSB: for data transmission and power input, OTG
• Video Output: HDMI 1.4 1080P, CVBS
• DVP Camera Interface: 24pin, 0.5mm pitch FPC seat
• Debug Serial Port: 4Pin, 2.54mm pitch pin header
• GPIO: 2.54mm spacing 40pin, compatible with Raspberry Pi's GPIO. It includes UART, SPI, I2C, IO etc
• User Key: Power LED x 1, Reset x 1
• PC Size: 64 x 50mm
• Power Supply: DC 5V/2A
• OS/Software: u-boot，Ubuntu MATE，Debian

The NanoPi M2 is another Samsung 4418 based ARM board released by FriendlyARM after the NanoPi 2 and NanoPi 2 Fire. It is only two thirds the size of the Raspberry Pi. It is open source. It works with Ubuntu Core, Ubuntu Mate, Debian, Android 5.1 and etc.

Compared to the Raspberry Pi 2 the NanoPi M2 uses the Samsung Cortex-A9 S5P4418 Soc. It integrates Gbps Ethernet, AXP228 PMU which supports software power-on/off and wake up functions. It can be powered via the MicroUSB port.

In such a small board it still integrates rich interfaces and ports. Besides the popular HDMI, 3.5mm audio jack, onboard microphone, four USB hosts and Gbit Ethernet it has a Raspberry Pi compatible 40 pin GPIO pin header and various video interfaces such as a DVP camera interface, an LCD interface which supports I2C capacitive LCD and etc. In addition, for user’s convenience it has a serial debug port for debugging and development.

Features:

• CPU: S5P4418, 400Mhz~1.4GHz
• PMU Power Management Unit: AXP228, support software power-off, sleep and wakeup functions
• DDR3 RAM: 32bit 1GB DDR3
• MicroSD Slot x1
• Connectivity: Gbps Ethernet port (RTL8211E)
• Audio: 3.5mm audio jack/Via HDMI
• Microphone: 1 x onboard Microphone
• USB Host: 4 x USB 2.0 Host, two are standard type A ports and the other two are 2.54mm pitch pin headers
• Micro USB: 1 x USB 2.0 Client
• LCD Interface: 0.5 mm pitch SMT FPC seat, for full-color LCD (RGB: 8-8-8)
• HDMI: HDMI 1.4A, Type-A, 1080P60
• DVP Camera Interface: 0.5mm pitch FPC socket. It includes ITU-R BT 601/656 8-bit, I2C and IO
• GPIO1: 2.54mm pitch 40pin, compatible with Raspberry Pi's GPIO. It includes UART, SPI, I2C, PWM, IO etc
• Debug Serial Port: 4Pin 2.54mm pitch pin header
• User Key: 1 x Power , 1 x Reset
• LED: 1 x Power LED, 1 x System LED
• RTC: RTC Pins
• Power: DC 5V/2A
• PCB Dimension(mm): 64 x 56, Six Layer
• OS/Software: u-boot, Android5.1, Debian Jessie 8

The NanoPi A64 is a new board of high performance with low cost designed by FriendlyElec. It uses Allwinner’s 64-bit A64 quad-core SoC(ARM Cortex-A53). FriendlyElec has made a UbuntuCore and a UbuntuMATE image files for it.

The NanoPi A64 is a small board with comprehensive interfaces, ports and features. It has Ethernet, IR receiver, Video/Audio input and output. It has onboard AXP803 PMU and WiFi. It takes power input from its MicroUSB port. It has MIPI-DSI and DVP interfaces, GPIO pin-header compatible with Raspberry Pi and a serial debug port.

On the NanoPi-NEO wiki FriendlyARM open sources its schematics, PCB, bootloader, kernel and file systems, and provides plenty of tutorials and code samples.

Features:

• CPU: Allwinner A64, 64-bit Quad-core Cortex-A53@648MHz to 1.152GHz, DVFS
• GPU: Mali400MP2, Supports OpenGL ES2.0, OpenVG1.1
• DDR3 RAM: 1GB
• Ethernet: One Gigabit Ethernet (RTL8211E)
• PMU Power Management: AXP803, support software power-off
• Wi-Fi: 802.11b/g/n
• Audio Out/MIC: 3.5mm audio jack
• IR Receiver: Onboard IR receiver
• USB 2.0 Type A x 2
• Serial Debug Port: 2.54mm pitch 4pin-header
• microSD Slot x 1
• microUSB x 1: only for power input
• DVP Camera: 0.5mm pitch 24pin FPC seat
• Video Out: 1.4 HDMI Type-A
• MIPI DSI: 0.5mm pitch 30pin FPC seat
• GPIO: 2.54mm pitch 40pin-header, compatible with Raspberry Pi's GPIO. It includes UART, SPI, I2C, PWM, IO etc
• I2S: 7pin, 2.54mm pitch
• Power Button x 1
• LED: Power Indication x 1, System LED x 1
• PCB : Six layer, ENIG
• Dimension: 64 x 60mm
• Power: DC 5V/2A
• OS: Ubuntu-Core with QtE, Ubuntu-MATE

The NanoPi NEO is an Allwinner H3 based ARM board designed and released by FriendlyARM for hobbyists, makers and electronic fans. It's Dimension is only 40 x 40 mm, It is open source. It works with Ubuntu MATE, Debian and etc.

The NanoPi NEO uses the Allwinner H3 Soc. It integrates Ethernet. It can be powered via the MicroUSB port.

In such a small board it still integrates rich interfaces and ports. Besides the popular Ethernet, USB-Host, USB-OTG, it has an onboard a serial debug port and a 36pin GPIO pin header.

On the NanoPi-NEO wiki FriendlyARM open sources its schematics, PCB, bootloader, kernel and file systems, and provides plenty of tutorials and code samples.

Features:

• CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz
• DDR3 RAM: 256MB/512MB
• Connectivity: 10/100M Ethernet
• USB Host: Type-A x 1, 2.54 mm pin x 2
• MicroSD Slot x 1
• MicroUSB: for data transmission and power input
• Debug Serial Port: 4Pin, 2.54 mm pitch pin header
• GPIO: 2.54mm pitch 36pin. It includes UART, SPI, I2C, IO etc
• PCB Dimension: 40 x 40 mm
• Power Supply: DC 5V/2A
• OS/Software: u-boot and UbuntuCore

The Smart4418 CPU board is a quad core Cortex A9 CPU board designed and developed by FriendlyARM for industrial applications. As a successor of the Smart210 CPU board it uses the Samsung Quad Core Cortex-A9 S5P4418 SoC with dynamic frequency scaling up to 1.4GHz. The standard Smart4418 CPU board has 1GB DDR3 RAM and 8GB eMMC. It has the AXP229 PMU enabling software power off/on and wake-up functions. In addition its Gbps Ethernet and audio jack make it suitable for various industrial applications.

The Smart4418 CPU board has 2.0mm pitch double row pin headers(P1, P2 and P4) containing 174 pins in total. These pins contain most popular interface pins. By default we have P1 and P2 soldered on the board and leave P4 for users'applications.

In addition we have a Smart4418/6818SDK carrier board with miniPCIe interface for 3G/4G modules, SATA interface, WiFi&Bluetooth with on board porcelain antenna, LVDS and RGB LCD interface, DVP camera interface and RPI compatible GPIO Pin-headers.

The most significant feature is the Smart4418 SDK carrier board can take a wide range of voltage from 6V to 24V, this meets industrial applications' requirement for wide range voltage inputs.

Note: When you connect an external hard disk to the board, you need to use a 12V/3A power adapter.

Features:

• CPU: Samsung S5P4418 Quad Core Cortex-A9, with dynamic frequency scaling from 400M Hz to 1.4G Hz
• PMU Power Management Unit: AXP228. it supports software power-off and wake-up functions.
• DDR3 RAM: 1GB 32bit DDR3 RAM
• Ethernet: Gbps Ethernet(RTL8211E) with unique MAC
• eMMC: 8GB
• Audio: 1 x audio codec chip, 1 x onboard Microphone and 1 x audio jack
• LED: 1 x Power LED, 2 x GPIO LED
• Others: onboard thermistor
• PCB Dimension: 74 x 55 mm, Six-Layer
• Power: DC 5V, up to 1.2A
• OS/Software: u-boot, Android5.1/4.4, Debian8, ubuntu-core
• 3 x 2.0mm pitch double row pin header, 174 pins in total:
  • USB 2.0 - Host x1, OTG x1
  • Video output/Display - RGB Parallel I/F (24-bit), LVDS and HDMI 1.4a
  • Video input - DVP Camera interface, ITU-R BT 601/656 8-bit and MIPI-CSI
  • Audio input - Microphone
  • Audio output - Audio jack (with headset detection) and HDMI audio
  • Ethernet - 10/100/1000Mbps Ethernet x 1
  • ADC - CPU internal ADC, 7 channels, 12-bit, range: 0 ~ 1.8V
  • External interface - SDIO/MMC x2, SPI x2, I2C x3, UART x5, PWM x3, GPIOs x24
  • Others - Power key input, RESET input, RESET output, RTC battery input

The NanoPi M3 is another ARM board developed by FriendlyARM for makers, hobbyists and hackers. With this new friend we wish you could get not only tech skills but also unique experiences in various applications and hacking. It is small, elegant but has rich ports and interfaces. Playing with it and working with it the M3 will not only inspire your ideas but also turn them into realities.

The NanoPi M3 uses the Samsung Octa-Core Cortex-A53 S5P6818 SoC. Its dynamic frequency scales from 400M up to 1.4GHz. It has Gbps Ethernet port, built-in WiFi and Bluetooth. Its AXP228 PMU supports software power-off, sleep and wakeup functions. In addition the NanoPi M3 has MicroUSB port for power supply and on-board porcelain antenna.

On this tiny board various ports and interfaces are integrated. It has DVP Camera/LVDS/HDMI/LCD interfaces, Gbps Ethernet, I2S, 3.5mm audio jack, four USB ports and a serial debug port.

Features:

• SoC： Samsung S5P6818 Octa-Core Cortex-A53, 400M Hz - 1.4G Hz
• Power Management Unit： AXP228 PMU, it supports software power-off and wake-up.
• System Memory： 1GB 32bit DDR3 RAM
• Storage： 1 x MicroSD Card Socket
• Ethernet： Gbit Ethernet (RTL8211E)
• WiFi： 802.11b/g/n
• Bluetooth： 4.0 dual mode
• Antenna： Porcelain Antenna IPX Interface
• Audio： 3.5 mm audio jack / via HDMI
• I2S: 7pin, 2.54mm pitch pin-header
• USB Host： 4 x USB 2.0 Host, two type A ports and two 2.54 mm pitch pin-headers
• MicroUSB: 1 x MicroUSB 2.0 Client, Type A
• LCD Interface： 0.5mm pitch 45 pin FPC seat, full color RGB 8-8-8
• HDMI: 1.4A Type A, 1080P
• LVDS: 20pin 2.00mm pitch pin-header
• DVP Camera： 0.5mm pitch 24 pin FPC seat
• GPIO： 2.54 mm pitch 40 pin-header
• Serial Debug Port： 2.54mm pitch 4pin-header
• User Key: K1 (power), Reset
• LED： 1 x power LED and 1 x status LED
• RTC Battery： RTC Battery Header
• Power： DC 5V/2A
• PCB： Six Layer, ENIG
• Dimension： 64 mm x 60 mm
• OS/Software: uboot, Android and Debian

The NanoPi S2(S2) is designed and developed by FriendlyElec for professionals, enterprise users, makers and hobbyists. It is a small board with WiFi, Bluetooth and eMMC.

It uses the Samsung Quad Core Cortex-A9 S5P4418 SoC with dynamic frequency scaling up to 1.4GHz. It has 1G DDR3 RAM, 802.11 b/g/n WiFi & Bluetooth 4.0 module. Its in-built power management unit uses the AXP228 chip which supports software shutdown. It takes power over the MicroUSB port. It has video input/output interface, 3.5mm audio jack, USB port and MicroSD card slot, serial debug port and ADC pin-header.

An Android and a Debian images are ready for the NanoPi S2. The Android OS supports HDMI and LCD output.

The NanoPi S2 has various interfaces, ports such as LVDS, and GPIOs which are compatible with Raspberry Pi's GPIOs. Its PCB dimension is 40 x 75 mm. The NanoPi S2 works with most of the modules and OS images that are developed for FriendlyElec's S5P4418 based boards**.**

Features:

• CPU: S5P4418, dynamic frequency from 400Mhz to 1.4GHz
• PMU Power Management Unit: AXP228. It supports software shutdown and wake-up functions.
• DDR3 RAM: 1GB
• eMMC: 8GB
• Wireless：802.11 b/g/n
• Bluetooth：4.0 dual mode
• MicroSD Slot: 1 x MicroSD Slot
• Audio: 3.5mm jack/Via HDMI
• Microphone: 3.5mm jack
• USB Host: 1 x USB 2.0 Host
• Micro USB: 1 x MicroUSB, USB 2.0 for both data transmission and power input
• LCD Interface: 0.5 mm pitch 45-pin SMT FPC seat, for full-color LCD (RGB: 8-8-8)
• HDMI: microHDMI,1080P60 output
• DVP Camera Interface: 0.5mm pitch 24-pin FPC seat.
• LVDS：0.5mm pitch 24-Pin FPC seat
• GPIO1: 2.54mm pitch 40pin, compatible with Raspberry Pi's GPIO. It includes UART, SPI, I2C, PWM, IO and etc
• ADC: onboard ADC pin header
• Serial Debug Port:2.54mm pitch 4-Pin header
• Antenna Interface: IPX
• User Key: 1 x Power , 1 x Boot Mode Switch
• LED: 1 x Power LED, 1 x System LED
• RTC: RTC Pins
• PCB Size(mm): 75 x 40, 8 layer， ENIG
• Power Supply: DC 5V/2A
• OS/Software: u-boot, Android5.1, Debian8

• CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz;
• Memory: 512M DDR3 RAM;
• Storage: 8GB eMMC;
• WiFi; 802.11b/g/n;
• Bluetooth: 4.0 dual mode;
• MicroSD Slot x 1;
• MicroUSB: OTG and power input;
• DVP Camera Interface: 0.5mm pitch 24-pin FPC seat;
• Debug Serial Port: 4Pin, 2.54mm pitch pin header;
• GPI01: 2.54mm spacing 24pin, It includes UART, SPI, I2C, GP10;
• GPIO2: 2.54mm spacing 12pin, It includes USBx2,IR, SPDIF,12S;
• PCB Size: 40 x 40mm;
• PCB layer: 6;
• Power Supply: DC 5V/2A;
• OS/Software: u-boot, UbuntuCore; and
• Weight: 7.5g(WITHOUT Pin-headers); 9.7g(WITH Pin-headers).

Smaller than an Oreo, Faster than a Raspberry Pi

The NanoPI-NEO2 is a newly released super tiny ARM board by Friendly Elec. It uses Allwinner's 64-bit H5 quad-core SoC (ARM Cortex-A53). It has internal hexa-core Mail450 GPU, 512M DDR3 RAM. A Ubuntu Core and Armbian image files are ready for it.

The NanoPi NEO2 inherits NEO's form factor and has compatible interfaces and ports with NEO. In addition in such a small dimension it has Gbps Ethernet and one USB host port. These features make it especially suitable for applications that require high data throughput, speedy data transmission and high performance. Hobbyists and makers will just love it.

Features:

• CPU: Allwinner H5, Quad-core 64-bit high-performance Cortex A53
• DDR3 RAM: 512MB
• Connectivity: 10/100/1000M Ethernet, RTL8211E-VB-CG chip
• USB Host: USB Type A x 1 and USB pin header x 2
• MicroSD Slot: MicroSD x 1 for system boot and storage
• LED: Power LED x 1, System LED(Blue) x 1
• GPIO1: 2.54mm pitch 24 pin-header, compatible with Raspberry Pi's GPIO pin1 - pin 24. It includes UART, SPI, I2C, IO etc.
• GPIO2: 2.54mm pitch 12 pin-header. It includes USB, IR receiver, I2S, IO etc.
• Serial Debug Port: 2.54mm pitch 4pinheader
• Audio In/Out: 2.0mm pitch 5 pin-header
• MicroUSB: Power input(5V/2A) and OTG
• PCB Dimension: 40 x 40mm
• Working Temperature: -30℃ to 70℃
• Weight: 13g(WITHOUT Pin-headers)
• OS/Software: u-boot,Ubuntu Core

Buy it here.

The NanoPi 2 Fire is a high performance ARM Board developed by FriendlyARM for Hobbysts, Makers and Hackers for IOT projects. It features Samsung's Cortex-A9 Quad Core S5P4418@1.4GHz SoC and 1G 32bit DDR3 RAM. It has a Gbps Ethernet port. It boots Android and Debian from a TF card. It integrates an HDMI and LCD interface. Its adoption of the Raspberry Pi's GPIO pin header makes it compatible with both Raspberry Pi's external GPIO modules and Arduino's shield boards. Its PCB dimension is 75 x 40 mm.

On the NanoPi-2-Fire wiki FriendlyARM open sources its schematics, PCB, bootloader, kernel and file systems, and provides plenty of tutorials and code samples.

Features:

• SoC: Samsung S5P4418 Quad Core Cortex-A9, 1.4G Hz
• System Memory: 1GB 32bit DDR3 RAM
• Connectivity: Gbps Ethernet port
• PMU Power Management: AXP228, support software power-off, sleep and wakeup functions
• USB 2.0 Type A x 1
• Debug Serial Port/UART0 x 1
• microSD Slot x 1
• microUSB x 1: for data transmission and power input
• LCD Interface: 0.5 mm pitch SMT FPC seat, for full-color LCD (RGB: 8-8-8)
• HDMI: HDMI 1.4A, Type-A, 1080P60
• DVP Camera Interface: 0.5mm spacing FPC socket. It includes ITU-R BT 601/656 8-bit, I2C and IO
• GPIO: 2.54mm spacing 40pin, compatible with Raspberry Pi's GPIO. It includes UART, SPI, I2C, PWM, IO etc
• Button: Power Button x 1, Reset Button x 1
• LED: LED for Power Indication x 1, System LED x 1
• PCB Dimension: 75 x 40mm
• Power: DC 5V/2A
• OS: Android, Debian

The NanoPi NEO Plus2 is another Allwinner based ARM board developed by FriendlyElec. It uses Allwinner's 64-bit quad-core A53 SoC with hexa-core Mali450 GPU and features 1GB of DDR3 RAM and 8GB eMMC. With a small size of only 40 x 52mm the NanoPi NEO Plus2 has rich on-board resources: AP6212A WiFi & Bluetooth module, Gbps Ethernet and two USB hosts. It supports system-boot from a MicroSD card.

The NanoPi NEO Plus2 has a carefully designed power system and 6-layer PCB layout. These features enhance the board's heat dissipation. The NanoPi NEO Plus2 meets popular IOT applications requirements for small size, high-speed and large throughput data transmission and high performance computing.


Features:

• SoC: Allwinner H5, Quad-core 64-bit high-performance Cortex A53
• DDR3 RAM:1GB
• Storage: 8GB eMMC
• Network: Gbps Ethernet
• WiFi: 802.11b/g/n
• Bluetooth: 4.0 dual mode
• USB Host: 2 x Independent USB Host
• MicroSD Slot: 1 x Slot. It supports system booting or is used to hold a storage card
• Audio Input/Output: 5-Pin, 2.0mm pitch pin-header
• MicroUSB: power input
• Debug Serial: 4Pin, 2.54mm pitch pin-header
• GPIO1:24Pin, 2.54mm pitch double-row pin-header containing UART, SPI, I2C and IO
• GPIO2:12Pin, 2.54mm pitch pin-header containing USB, IR receiver,I2S and IO
• Power Supply: DC 5V/2A
• PCB Dimension: 40 x 52mm
• PCB Layer: 6-Layer

FriendlyElec's NanoPi-K2 uses Amlogic's 64-bit quad-core A53 S905 SoC. This SoC has internal Mali450 GPU. Its dynamic frequency scales up to 2GHz. Its most significant feature is that it supports various video formats and has strong video decoding capability.

The NanoPi-K2 has 2GB DDR3 RAM, onboard WiFi & Bluetooth, Gbps Ethernet, USB, HDMI, IR and more including a socket for external eMMC. It boots OS from a TF card. It has the same form factor and layout of interfaces and ports as the RPi3. Android and Ubuntu images are available.

Amlogic S905 - 64-bit SoC for TV Box

S905 is manufactured on 28nm process technology. It is a quad-core ARM Cortex-A53 SoC with penta-core Mali-450 GPU.

It supports ultra HD 4K@60fps hard decoding video playing as well as H.265 10-bit, H.264 and AVS+ video formats.

2GB DDR3 High-speed RAM - Speedy & Smooth

The 2GB DDR3 RAM is capable of playing ultra HD video stream smoothly and running multiple applications fast and reliably.