Parts search results

ELM327, STN2100 - OBD-II Interface Evaluation Board

LTE cat 4 PCI Express Mini Card

LTE CAT NB1-IOT WITH ANTENNA (AR

Module Adapter Cards PCI Express

5G NB-IoT Kit Assorted

LTE Cat NB2 IoT & GNSS USB Dongl

Transceiver Module

ELM327, STN2100 OBD-II Interface Evaluation Board

LTE CAT 4 IOT & GNSS USB DONGLE

LTE cat 4 PCI Express Mini Card

Transceiver Module

ATSAMD21G18 Cellular Development Platform, GPS 850MHz, 900MHz, 1.8GHz, 1.9GHz Evaluation Board

LTE & GNSS (Cat 1 &Cat M) & UMTS

Cellular, Navigation EDGE, GPRS, GSM, Galileo, GLONASS, GPS, GNSS, HSPA+, HSUPA, UMTS, WCDMA Transceiver Module Antenna Not Included Surface Mount

NB-IoT & GNSS Starter Kit

This is a full starter kit used with NB-IoT & GNSS hardware board. The kit includes sensors, actuators, motors, keypad, LCD and display, and motors. The Kit enables you to perform many electronics projects using Arduino. The kit includes more than 30 Arduino sketches & projects ready for running on the NB-IoT &GNSS hardware board. This kit can be used as Do-It-Yourself (DIY).

Features

• NB-IoT & GNSS Hardware board
• More than 40 hardware components for building different Arduino projects.
• Ready-made Arduino sketches to exercise the Arduino projects.
• Kit are packages in small firm package of size 240 x 160 x 60 mm

Kit Hardware Content:

• 1 x 5G NB-IoT Hardware Board
• 1 x LTE & GPS Antenna
• 1 x 4*4 Matrix Keypad
• 1 x 5V Relay
• 1 x Step Motor
• 1 x Temperature Sensor LM35
• 1 x Motor
• 1 x IR Receiver
• 2 x Vibration Sensor SW-520D
• 3 x Jumper Cap
• 5 x Key Switch (yellow)
• 1 x DHT11 Module
• 1 x Clock Module
• 1 x Big Sound Module
• 1 x Water Module
• 3 x Photocell
• 1 x Active Buzzer
• 1 x SN74HC595
• 1 x 3-Color LED
• 1 x 7 Segment
• 1 x 4-7 Segment
• 1 x Passive Buzzer
• 1 x B10K Variable
• 1 x Flame
• 1 x SG90 Servo
• 1 x 1602 Display
• 1 x 8*8 Matrix
• 1 x 830 Breadboard
• 1 x Joystick
• 1 x RFID Module
• 1 x Remote Control
• 10 x Blue LED
• 10 x Red LED
• 10 x Green LED
• 10 x 330R Resistance
• 10 x 220R Resistance
• 10 x 10K Resistance
• 10 x 1K Resistance
• 1 x Jumper Wire
• 1 x F-M Dupont Wire
• 1 x 2.54mm 40Pin

LTE cat NB2 PCI Express Mini Car

QCA4020 MULTI-MODE WIFI, BLUETOOTH, ZIGBEE

This is a miniPCIe card that supports multi-mode intelligent connectivity. It supports dual-band WiFi, Bluetooth 5, and ZigBee. It is based on Qualcomm QCA4020 System-On-Chip (SoC). It has low power SoC that integrates a Cortex M4F for application processing, Cortex M0 for network stack processing, and a separate processor for Wi-Fi stack designed to enable a highly concurrent multiple radio solution.

The QCA4020 SDK pre-integrates support for advanced security features and multiple software and cloud ecosystems.

Designed to address IoT fragmentation and support for interoperability, this solution is ideal for multiple IoT industries from home control and automation, networking, home entertainment and smart cities.

Feature Highlights

• Multi-mode SoC supporting dual band Wi-Fi, Bluetooth 5, and IEEE 802.15.4 concurrently
• Dedicated processor for Bluetooth LE LC and 15.4 MAC
• Dedicated processor for 802.11 a/b/g/n
• Zigbee 3.0 and OpenThread support
• Isolated power islands for low power operation
• Advanced hardware-based security featuring secure boot, trusted execution environment, encrypted storage, key provisioning and application-level security
• Comprehensive set of peripherals and interfaces: SPI, I2C, UART, HS-UART, ADC and GPIOs
• 300+KB RAM reserved for applications
• Bluetooth radio details: v5.0 with PA =+4dBm/+10dBm (for Long Range)
• 15.4 radio details: 2006 compliant, 15.4e, 2.4GHz DSSS +4dBm/+21dBm (for Long Range)

802.15.4, Bluetooth, WiFi 802.11a/b/g/n, Bluetooth v5.0, Thread, Zigbee® Transceiver Module 2.4GHz, 5GHz Antenna Not Included Card Edge

Cellular, Navigation BeiDou, Galileo, GLONASS, GNSS, GPS, HSDPA, HSPA+, HSUPA, LTE, UMTS, WCDMA Transceiver Module Antenna Not Included Card Edge

LTE cat NB2 PCI Express Mini Car