Search results for: arduino

RP2040 XIAO RP2040 - ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board

Arduino Boards or other MCU Boards - Connector

Starter Kit Arduino Uno Rev 3 Atmega328; |Multicomp Pro ARDUINO.

With the new Arduino M0 board, the more creative individual will have the potential to create one’s most imaginative and new ideas for IoT devices, wearable technologies, high tech automation, wild robotics and other not yet thinkable adventures in the world of makers. The Arduino M0 represents a simple, yet powerful, 32-bit extension of the Arduino UNO platform. The board is powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex M0 core. With the addition of the M0 board, the Arduino family becomes larger with a new member providing increased performance.

The power of its Atmel’s core gives this board an upgraded flexibility and boosts the scope of projects one can think of and make; moreover, it makes the M0 the ideal educational tool for learning about 32-bit application development.

Zulu 2km Radio Link

Microcontroller board based on the ATmega32u4

The MKRZero brings you the power of a Zero in the smaller format established by the MKR form factor. The MKRZero board acts as a great educational tool for learning about 32-bit application development. It has an on-board SD connector with dedicated SPI interfaces (SPI1) that allows you to play with files with no extra hardware!

The board is powered by Atmel’s SAMD21 MCU, which features a 32-bit ARM Cortex M0+ core.

Warning: Unlike most Arduino & Genuino boards, the MKRZero runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board.

The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it by a LiPo battery. The battery voltage can also be monitored since a connection between the battery and the analog converter of the board exists.

With the new Arduino M0 pro board, the more creative individual will have the potential to create one’s most imaginative and new ideas for IoT devices, wearable technologies, high tech automation, wild robotics and other not yet thinkable adventures in the world of makers. The Arduino M0 pro represents a simple, yet powerful, 32-bit extension of the Arduino UNO platform. The board is powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex M0 core.

With the addition of the M0 board, the Arduino family becomes larger with a new member providing increased performance. The power of its Atmel’s core gives this board an upgraded flexibility and boosts the scope of projects one can think of and make; moreover, it makes the M0 Pro the ideal educational tool for learning about 32-bit application development. Atmel’s Embedded Debugger (EDBG), integrated in the board, provides a full debug interface with no need for additional hardware, making debugging much easier. EDBG additionally supports a virtual COM port for device programming and traditional Arduino boot loader functionality uses.

BULK|Development Boards & Kits - Other Processors

Connector Board Interface Arduino Platform Evaluation Expansion Board

Eval Kit, Gas/Temp/Humidity Sensor; Board Type:Evaluation Kit; Ic/Module Used:Sgp30, Shtc1; Application Sub Type:Gas, Temperature & Humidity Sensor; Kit Contents:Sek Sensor Bridge, 2X Sgpc3/Shtc1, Connector Cables; Product Range:- Rohs Compliant: Yes |Sensirion ARDUINO SHIELD SGP30_SHTC1

The Arduino MEGA ADK is a microcontroller board based on the ATmega2560. It has a USB host interface to connect with Android based phones, based on the MAX3421e IC. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.

The MEGA ADK is based on the Mega 2560.

Similar to the Mega 2560 and Uno, it features an ATmega8U2 programmed as a USB-to-serial converter.

Revision 2 of the Mega ADK board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.

Revision 3 of the board has the following new features:

• 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Arduino Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
• Stronger RESET circuit.

Dev.kit: Arduino; prototype board; Comp: ATMEGA328

Whether you’re looking to build your first Internet of Things project or simply make an existing device smarter, the MKR1000 Bundle provides everything you need to get started.

The kit is based around the MKR1000 — a powerful board that combines the functionality of the Zero and the Wi-Fi Shield — and enables Makers to add connectivity to their designs with minimal prior networking experience.

Each bundle includes:

• 1 Arduino MKR1000 board, with header soldered
• 1 micro USB cable
• 1 400-point breadboard
• 70 solid-core jumper wires
• 1 9V battery snap
• 1 stranded jumper wire
• 6 phototransistors
• 3 potentiometers (10 kilohm)
• 10 pushbuttons
• 1 temperature sensor (TMP36)
• 1 tilt sensor
• 1 alphanumeric LCD (16 x 2 characters)
• 1 bright white
• 34 LEDs (1 bright white, 1 RGB, 8 red, 8 green, 8 yellow, 3 blue)
• 1 small DC motor (6/9V)
• 1 small servo motor
• 1 piezo capsule (PKM17EPP-4001-B0)
• 1 H-bridge motor driver (L293D)
• 1 octocouplers (4NE5)
• 2 MOSFET transistors (IRF520)
• 5 capacitors (100uF)
• 5 diodes (1N4007)
• 3 transparent gels (R,G,B)
• 1 male pin strip (40 x 1)
• 20 resistors (220 ohm)
• 5 resistors (560 ohm)
• 5 resistors (1 kilohm)
• 5 resistors (4.7 kilohm)
• 20 resistors (10 kilohm)
• 5 resistors (1 megohm)
• 5 resistors (10 megohm)

Please note, don't connect 9V to the board, as it will be damaged. You can use the 9V Battery strip to supply an external component.

REEL|Multiple Function Sensor Development Tools Environmental Sensor Shield featuring the SGPC3 and SHTC3, Obsolete

Arduino Esplora