Triple Output Synchronous 3-Phase DC/DC Controller with Up/Down Tracking Features: Current Mode Controller with On-board MOSFET Drivers Programmable Power Up/Down Tracking Wide VIN Range: 3.3V to 36V (VCC = 5V) ±1% 0.6V VFB Accuracy Over Temperature Power Good Output Voltage Monitor Phase-Lockable or Adjustable Frequency: 160kHz to 700kHz OPTI-LOOP® Compensation Minimizes COUT Current Foldback and Overvoltage Protection Selectable Continuous, Discontinuous or Burst Mode® Operation at Light Load Programmable Phase Operation Available in 5mm × 7mm QFN and 36-Lead SSOP Packages

MAIN/CAM LED Controller in 3mm 3mm QFN Features: Low Noise Charge Pump Provides High Efficiency with Automatic Mode Switching Multimode Operation: 1x, 1.5x, 2x Individual Full-Scale Current Set Resistors Up to 500mA Total Output Current Single Wire EN/Brightness Control for MAIN and CAM LEDs (8 Brightness Steps) 64:1 Brightness Control Range for MAIN Display Four 25mA Low Dropout MAIN LED Outputs One 400mA Low Dropout CAM LED Output Low Noise Constant Frequency Operation* Low Shutdown Current: 3μA Internal Soft-Start Limits Inrush Current During Startup and Mode Switching Open/Short LED Protection No Inductors 3mm × 3mm 16-Lead Plastic QFN Package

16-Bit, 80Msps ADC Features: Sample Rate: 105Msps/80Msps 78.2dBFs Noise Floor 100dB SFDR SFDR >82dB at 250MHz (1.5Vp-p Input Range) PGA Front End (2.25Vp-p or 1.5Vp-p Input Range) 700MHz Full Power Bandwidth S/H Optional Internal Dither Optional Data Output Randomizer Single 3.3V Supply Power Dissipation: 900mW/725mW Optional Clock Duty Cycle Stabilizer Out-of-Range Indicator Pin Compatible Family 105Msps: LTC2207 (16-Bit), LTC2207-14 (14-Bit) 80Msps: LTC2206 (16-Bit), LTC2206-14 (14-Bit) 65Msps: LTC2205 (16-Bit), LTC2205-14 (14-Bit) 40Msps: LTC2204 (16-Bit) 25Msps: LTC2203 (16-Bit) Single-Ended Clock 10Msps: LTC2202 (16-Bit) Single-Ended Clock 48-Pin 7mm x 7mm QFN Package

16-Bit, 65Msps ADCs Features: Sample Rate: 65Msps/40Msps 79dB SNR and 100dB SFDR (2.25VP-P Range) SFDR >92dB at 140MHz (1.5VP-P Input Range) PGA Front End (2.25VP-P or 1.5VP-P Input Range) 700MHz Full Power Bandwidth S/H Optional Internal Dither Optional Data Output Randomizer Single 3.3V Supply Power Dissipation: 610mW/480mW Optional Clock Duty Cycle Stabilizer Out-of-Range Indicator Pin Compatible Family 105Msps: LTC2207 (16-Bit), LTC2207-14 (14-Bit) 80Msps: LTC2206 (16-Bit), LTC2206-14 (14-Bit) 65Msps: LTC2205 (16-Bit), LTC2205-14 (14-Bit) 40Msps: LTC2204 (16-Bit) 48-Pin (7mm × 7mm) QFN Package

16-Bit, 20Msps ADC Features: Sample Rate: 20Msps 81.6dB SNR and 100dB SFDR (2.5V Range) 90dB SFDR at 70MHz (1.667VP-P Input Range) PGA Front End (2.5VP-P or 1.667VP-P Input Range) 380MHz Full Power Bandwidth S/H Optional Internal Dither Optional Data Output Randomizer Single 3.3V Supply Power Dissipation: 211mW Clock Duty Cycle Stabilizer Out-of-Range Indicator Pin Compatible Family 25Msps: LTC2203 (16-Bit) 10Msps: LTC2202 (16-Bit) 48-Pin (7mm × 7mm) QFN Package

16-Bit, 105Msps ADC Features: Sample Rate: 105Msps/80Msps 78.2dBFS Noise Floor 100dB SFDR SFDR >82dB at 250MHz (1.5VP-P Input Range) PGA Front End (2.25VP-P or 1.5VP-P Input Range) 700MHz Full Power Bandwidth S/H Optional Internal Dither Optional Data Output Randomizer Single 3.3V Supply Power Dissipation: 900mW/725mW Optional Clock Duty Cycle Stabilizer Out-of-Range Indicator Pin Compatible Family 105Msps: LTC2207 (16-Bit), LTC2207-14 (14-Bit) 80Msps: LTC2206 (16-Bit), LTC2206-14 (14-Bit) 65Msps: LTC2205 (16-Bit), LTC2205-14 (14-Bit) 40Msps: LTC2204 (16-Bit) 25Msps: LTC2203 (16-Bit) Single-Ended Clock 10Msps: LTC2202 (16-Bit) Single-Ended Clock 48-Pin 7mm × 7mm QFN Package

16-Bit, 65Msps ADCs Features: Sample Rate: 65Msps/40Msps 79dB SNR and 100dB SFDR (2.25VP-P Range) SFDR >92dB at 140MHz (1.5VP-P Input Range) PGA Front End (2.25VP-P or 1.5VP-P Input Range) 700MHz Full Power Bandwidth S/H Optional Internal Dither Optional Data Output Randomizer Single 3.3V Supply Power Dissipation: 610mW/480mW Optional Clock Duty Cycle Stabilizer Out-of-Range Indicator Pin Compatible Family 105Msps: LTC2207 (16-Bit), LTC2207-14 (14-Bit) 80Msps: LTC2206 (16-Bit), LTC2206-14 (14-Bit) 65Msps: LTC2205 (16-Bit), LTC2205-14 (14-Bit) 40Msps: LTC2204 (16-Bit) 48-Pin (7mm × 7mm) QFN Package

14-Bit, 80Msps ADC Features: Sample Rate: 105Msps/80Msps 77.3dBFS Noise Floor 98dB SFDR SFDR >82dB at 250MHz (1.5VP-P Input Range) PGA Front End (2.25VP-P or 1.5VP-P Input Range) 700MHz Full Power Bandwidth S/H Optional Internal Dither Optional Data Output Randomizer Single 3.3V Supply Power Dissipation: 947mW/762mW Optional Clock Duty Cycle Stabilizer Out-of-Range Indicator Pin-Compatible Family 105Msps: LTC2207 (16-Bit), LTC2207-14 (14-Bit) 80Msps: LTC2206 (16-Bit), LTC2206-14 (14-Bit) 65Msps: LTC2205 (16-Bit), LTC2205-14 (14-Bit) 40Msps: LTC2204 (16-Bit) 25Msps: LTC2203 (16-Bit) Single-Ended Clock 10Msps: LTC2202 (16-Bit) Single-Ended Clock 48-Pin 7mm × 7mm QFN Package

Dual 2-Phase, No RSENSE, Synchronous Controller with Output Tracking Features: No Current Sense Resistors Required Out-of-Phase Controllers Reduce Required Input Capacitance Tracking Function Wide VIN Range: 2.75V to 9.8V 0.6V ±1% Voltage Reference High Current Limit Constant Frequency Current Mode Operation Low Dropout Operation: 100% Duty Cycle True PLL for Frequency Locking or Adjustment Selectable Pulse Skipping/Forced Continuous Operation Auxiliary Winding Regulation Internal Soft-Start Circuitry Power Good Output Voltage Monitor Output Overvoltage Protection Micropower Shutdown: IQ = 9μA Tiny Low Profile (4mm × 4mm) QFN and narrow SSOP packages.

USB Power Manager with High Voltage Switching Charger Features: Seamless Transition Between Power Sources: Li-Ion Battery, USB, and 6V to 36V External Supply High Efciency 1.2A Charger from 6V to 36V Input with Adaptive Output Control (LTC4089) Load Dependent Charging from USB Input Guarantees Current Compliance 215mΩ Internal Ideal Diode plus Optional External Ideal Diode Controller Provides Low Loss Power Path When External Supply/USB Not Present Constant-Current/Constant-Voltage Operation with Thermal Feedback to Maximize Charging Rate without Risk of Overheating Selectable 100% or 20% Current Limit (e.g., 500mA/100mA) from USB Input Preset 4.2V Charge Voltage with 0.8% Accuracy C/10 Charge Current Detection Output NTC Thermistor Input for Temperature Qualied Charging Tiny (6mm × 3mm × 0.75mm) 22-Pin DFN Package

Wide Input Voltage Synchronous Buck-Boost DC/DC Converter Features: Regulated Output with Input Voltages Above, Below or Equal to the Output 1.8V to 5.5V Input and 1.8V to 5.25V Output Range 250mA Continuous Output Current from 1.8V VIN 600mA Continuous/1A Peak Output Current from Li-Ion Single Inductor Synchronous Rectication: Up to 96% Efciency Programmable Automatic Burst Mode® Operation Output Disconnect in Shutdown Pin Compatible with the LTC3440 Programmable Frequency from 300kHz to 2MHz <1µA Shutdown Current Small Thermally Enhanced 10-Lead (3mm × 3mm) DFN and 10-Lead MS Packages

300MHz Low Distortion, Low Noise Differential Amplifier/ADC Driver (AV = 20dB) Features: 300 MHz –3dB Bandwidth Fixed Gain of 20dB Low Distortion: 48.5dBm OIP3, –81dBc HD3 (20MHz, 2VP-P) Low Noise: 12.4dB NF, en= 1.9nV/√Hz (20MHz) Differential Inputs and Outputs Additional Filtered Outputs Adjustable Output Common Mode Voltage DC- or AC-Coupled Operation Minimal Support Circuitry Required Small 0.75mm Prole 16-Lead 3mm × 3mm QFN Package

Very Low Noise, Differential Amplifier and 5MHz Lowpass Filter Features: Programmable Differential Gain via Two External Resistors Adjustable Output Common Mode Voltage Operates and Specified with 3V, 5V, ±5V Supplies 0.5dB Ripple 4th Order Lowpass Filter with 5MHz Cutoff 82dB S/N with 3V Supply and 2VP-P Output Low Distortion, 2VP-P, 800Ω Load 1MHz: 93dBc 2nd, 96dBc 3rd Fully Differential Inputs and Outputs Compatible with Popular Differential Amplifier Pinouts Available in an SO-8 Package

Low IQ Synchronous Step-Down Controller Features: Wide Output Voltage Range: 0.8V ≤ VOUT ≤ 10V Low Operating IQ: 80µA OPTI-LOOP® Compensation Minimizes COUT ±1% Output Voltage Accuracy Wide VIN Range: 4V to 36V Operation Phase-Lockable Fixed Frequency 140kHz to 650kHz Dual N-Channel MOSFET Synchronous Drive Very Low Dropout Operation: 99% Duty Cycle Adjustable Output Voltage Soft-Start or Tracking Output Current Foldback Limiting Output Overvoltage Protection Low Shutdown IQ: 10µA Selectable Continuous, Pulse-Skipping or Burst Mode® Operation at Light Loads Small 16-Lead Narrow SSOP or 3mm × 5mm DFN Package

Single Switch Synchronous Forward Controller Features: Synchronous Rectifier Control for High Efficiency Programmable Volt-Second Clamp Output Power Levels from 25W to 500W Low Current Start-Up (LT1952: 460µA; VIN On/Off = 14.25V/8.75V) (LT1952-1: 400µA; VIN On/Off = 7.75V/6.5V) True PWM Soft-Start Low Stress Short Circuit Protection Precision 107mV Current Limit Threshold Adjustable Delay for Synchronous Timing Accurate Shutdown Threshold with Programmable Hysteresis Programmable Slope Compensation Programmable Leading Edge Blanking Programmable Frequency (100kHz to 500kHz) Synchronizable to an External Clock up to 1.5 • fOSC Internal 1.23V Reference 2.5V External Reference Current Mode Control Small 16-Pin SSOP Package

Multiple Supply Hot Swap Controller with I2C Compatible Monitoring Features: Allows Safe Insertion into Live CompactPCI™ or PCI Express™ Backplane 8-Bit ADC Monitors Current and Voltage I2C™/SMBus Interface dI/dt Controlled Soft Start Simultaneous or Sequenced Turn-On ±20V Absolute Maximum Rating for ±12V Supplies No External Gate Capacitor Required Dual-Level Circuit Breaker and Current Limit Bus Precharge Output Power Good Input with Timeout Optional Latch-off or Autoretry After Faults Alerts Host After Faults Integrated LOCAL_PCI_RST# Logic 36-Pin SSOP and 38-Pin (5mm × 7mm) QFN Packages

Photoflash Charger with Adjustable Input Current and IGBT Driver Features: Adjustable Input Current Integrated IGBT Driver No Output Voltage Divider Needed Uses Small Transformers: 5.8mm × 5.8mm × 3mm Fast Photoflash Charge Times Charges Any Size Photoflash Capacitor Supports Operation from Single Li-Ion Cell, Two AA Cells or any Supply from 1.5V Up to 16V Small 10-Lead (3mm × 2mm) DFN Package

12-Bit, 210Msps ADC Features: Sample Rate: 210Msps 65.5dB SNR 78dB SFDR 1.2GHz Full Power Bandwidth S/H Single 2.5V Supply Low Power Dissipation: 585mW LVDS, CMOS, or Demultiplexed CMOS Outputs Selectable Input Ranges: ±0.5V or ±1V No Missing Codes Optional Clock Duty Cycle Stabilizer Shutdown and Nap Modes Data Ready Output Clock Pin Compatible Family 250Msps: LTC2242-12 (12-Bit), LTC2242-10 (10-Bit) 210Msps: LTC2241-12 (12-Bit), LTC2241-10 (10-Bit) 170Msps: LTC2240-12 (12-Bit), LTC2240-10 (10-Bit) 185Msps: LTC2220-1 (12-Bit) 170Msps: LTC2220 (12-Bit), LTC2230 (10-Bit) 135Msps: LTC2221 (12-Bit), LTC2231 (10-Bit) 64-Pin 9mm × 9mm QFN Package

72 MHz Dual Programmable Low Pass Filter Features: Low Noise Figure: 10 dB High linearity: In-Band Output IP3 > +30 dBm In-Band Output IP2 > +60 dBm Pre-programmed and / or Programmable Bandwidth: 5 MHz to 72 MHz. (Please see HMC1023LP5E Ordering Information) Exceptional 3 dB Bandwidth Accuracy: ±2.5% Programmable Gain: 0 or 10 dB Integrated ADC Driver Amplifier Automatic Filter Calibration Externally Controlled Common Mode Output Level Filter Bypass Option Pin & Register Compatible to HMC900LP5E  Read/Write Serial Port Interface (SPI) 32 Lead 5x5 mm SMT Package 25 mm²

Clock Generator with Fractional-N PLL & Integrated VCO SMT, 125 - 350 MHz Features: Frequency Range: 125 - 350 MHz 75 fs RMS Jitter Generation (Typical) Exceeds G.8251 & GR-253-CORE Jitter Specifications -165 dBc/Hz Phase Noise floor Maximum Phase Detector Rate 100 MHz Figure of Merit (FOM) -227 dBc/Hz 24-Bit Step Size, Resolution 3 Hz Typical Exact Frequency Mode Built-in Digital Self Test 40 Lead 6x6mm SMT Package: 36mm2