1.2A Programmable Device Power Supply with Integrated 16-bit Level Setting DACs Features: Programmable device power supply (DPS) FV, MI, MV, FNMV functions 5 internal current ranges (on-chip RSENSE) ±5 μA, ±25 μA, ±250 μA, ±2.5 mA, ±25 mA 2 external high current ranges (external RSENSE) EXTFORCE1: ±1.2 A maximum EXTFORCE2: ±500 mA maximum Integrated programmable levels All 16-bit DACs: force DAC, comparator DACs, clamp DACs, offset DAC, OSD DAC, DGS DAC Programmable Kelvin clamp and alarm Offset and gain correction registers on-chip Ramp mode on force DAC for power supply slewing Programmable slew rate feature, 1 V/μs to 0.3 V/μs DUTGND Kelvin sense and alarm 25 V FV span with asymmetrical operation within −22 V/+25 V On-chip comparators Gangable for higher current Guard amplifier System PMU connections Current clamps Die temperature sensor and shutdown feature On-chip diode thermal array Diagnostic register allows access to internal nodes Open-drain alarm flags (temperature, current clamp, Kelvin alarm) SPI-/MICROWIRE-/DSP-compatible interface 64-lead (10 mm × 10 mm) TQFP with exposed pad (on top) 72-ball (8 mm × 8 mm) flip-chip BGA

Single, 12-Bit nanoDAC with 5 ppm/C On-Chip Reference in SOT-23 Features: 12-Bit DAC; 12-Bit Accuracy Guaranteed On-chip, 1.25 V/2.5 V, 5 ppm/°C reference Tiny 8-lead SOT-23/MSOP packages Power-down to 480 nA @ 5 V, 200 nA @ 3 V 3 V/5 V single power supply Guaranteed 16-bit monotonic by design Power-on reset to zero/midscale 3 power-down functions Serial interface with Schmitt-triggered inputs Rail-to-rail operation SYNC interrupt facility

Quad,12-Bit nanoDAC with 5ppm/C On-Chip Reference Features: Low power, smallest pin-compatible, quad nanoDACs  AD5664R: 16 bits AD5644R: 14 bits AD5624R: 12 bits User selectable external or internal reference External reference default On-chip 1.25 V/2.5 V, 5 ppm/°C reference 10-lead MSOP; 10-lead, 3 mm × 3 mm LFCSP_WD; and 12-ball, 1.665 mm × 2.245 mm WLCSP 2.7 V to 5.5 V power supply Guaranteed monotonic by design Power-on reset to zero scale Per channel power-down Serial interface, up to 50 MHz

5 V, 12-Bit nanoDAC, Serial Interface in MSOP and LFCSP Packages Features: 8-lead MSOP and 8-lead LFCSP packages Complete, voltage output with internal reference 1 mV/bit with 4.095 V full scale 5 V single-supply operation No external components required 3-wire serial interface, 20 MHz data loading rate Low power: 2.5 mW

Dual, 12-Bit nanoDAC with I2C Interface Features: AD5627R/AD5647R/AD5667R 12-/14-/16-bit On-chip 1.25 V/2.5 V, 5 ppm/°C reference AD5627/AD5667 12-/16-bit External reference only 3 mm x 3 mm LFCSP and 10-lead MSOP 2.7 V to 5.5 V power supply Low power, smallest pin-compatible, dual nanoDACs Guaranteed monotonic by design Power-on reset to zero scale Per channel power-down Hardware LDAC and CLR functions I2C-compatible serial interface supports standard (100 kHz), fast (400 kHz), and high speed (3.4 MHz) modes

12-bit Digital-to-Analog Converters, with Zener Reference Features: Single Chip Construction Very High Speed Settling to 1/2 LSB AD565A: 250 ns max Full-Scale Switching Time: 30 ns Guaranteed for Operation with ±12 V (AD565A) Supplies Low Cost Linearity Guaranteed Over temperature 1/2 LSB max (K, T Grades) Monotonicity Guaranteed Over temperature Low Power = 225mW max Use with On-Board High Stability Reference

Quad, 16-Bit nanoDAC with 5ppm/C On-Chip Reference Features: Low power, smallest pin-compatible, quad nanoDACs  AD5664R: 16 bits AD5644R: 14 bits AD5624R: 12 bits User selectable external or internal reference External reference default On-chip 1.25 V/2.5 V, 5 ppm/°C reference 10-lead MSOP; 10-lead, 3 mm × 3 mm LFCSP_WD; and 12-ball, 1.665 mm × 2.245 mm WLCSP 2.7 V to 5.5 V power supply Guaranteed monotonic by design Power-on reset to zero scale Per channel power-down Serial interface, up to 50 MHz

Quad, 16-Bit nanoDAC with 5 ppm/C On-Chip Reference, I2C Interface Features: Low power, smallest pin-compatible, quad nanoDACs AD5625R/AD5645R/AD5665R 12-/14-/16-bit nanoDACs On-chip, 2.5 V, 5 ppm/°C reference in TSSOP On-chip, 2.5 V, 10 ppm/°C reference in LFCSP On-chip, 1.25 V, 10 ppm/°C reference in LFCSP AD5625/AD5665 12-/16-bit nanoDACs External reference only 3 mm × 3 mm, 10-lead LFCSP; 14-lead TSSOP; and 1.665 mm × 2.245 mm, 12-ball WLCSP 2.7 V to 5.5 V power supply Guaranteed monotonic by design Power-on reset to zero scale/midscale Per channel power-down Hardware LDAC and CLR functions I2C-compatible serial interface supports standard (100 kHz), fast (400 kHz), and high speed (3.4 MHz) modes

Octal, 16-Bit, SPI Voltage Output denseDAC With 5 ppm/C On-Chip Reference Features: Low power, small footprint, pin-compatible octal DACs: 16 bits 14-lead/16-lead TSSOP, 16-lead LFCSP, and 16-ball WLCSP On-chip 1.25 V/2.5 V, 5 ppm/°C reference Power down to 400 nA at 5 V, 200 nA at 3 V 2.7 V to 5.5 V power supply Guaranteed monotonic by design Power-on reset to zero scale or midscale 3 power-down functions Hardware LDAC and LDAC override function CLR function to programmable code Rail-to-rail operationAD5668-EP supports defense and aerospace applications (AQEC standard) Download AD5668-EP data sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/12643

16-Channel, 12-Bit nanoDAC+ with 2 ppm/C Voltage Reference TC, I2C Interface Features: High relative accuracy (INL): ±1 LSB maximum at 12 bits TUE: ±0.14% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.06% of FSR maximum Low drift, 2.5 V voltage reference TC: 2 ppm/°C typical 40 mA short-circuit current Wide operating ranges −40°C to +125°C temperature range 2.7 V to 5.5 V power supply range Simplified implementation User selectable gain of 1 or 2 (GAIN pin) 1.8 V logic compatibility 400 kHz I2C-compatible serial interface 28-lead, 4 mm × 4 mm, RoHS compliant LFCSP

16-Channel, 12-Bit nanoDAC+ with 2 ppm/C Voltage Reference TC, I2C Interface Features: High relative accuracy (INL): ±1 LSB maximum at 12 bits TUE: ±0.14% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.06% of FSR maximum Low drift, 2.5 V voltage reference TC: 2 ppm/°C typical 40 mA short-circuit current Wide operating ranges −40°C to +125°C temperature range 2.7 V to 5.5 V power supply range Simplified implementation User selectable gain of 1 or 2 (GAIN pin) 1.8 V logic compatibility 400 kHz I2C-compatible serial interface 28-lead, 4 mm × 4 mm, RoHS compliant LFCSP

16-Channel, 12-Bit nanoDAC+ with 2 ppm/C Voltage Reference TC, I2C Interface Features: High relative accuracy (INL): ±1 LSB maximum at 12 bits TUE: ±0.14% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.06% of FSR maximum Low drift, 2.5 V voltage reference TC: 2 ppm/°C typical 40 mA short-circuit current Wide operating ranges −40°C to +125°C temperature range 2.7 V to 5.5 V power supply range Simplified implementation User selectable gain of 1 or 2 (GAIN pin) 1.8 V logic compatibility 400 kHz I2C-compatible serial interface 28-lead, 4 mm × 4 mm, RoHS compliant LFCSP

16-Channel, 12-BitnanoDAC+ with 2 ppm/C VoltageReference Temperature Coefficient, SPI Interface Features: High performance High relative accuracy (INL): ±1 LSB maximum at 12 bits TUE: ±0.14% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.06% of FSR maximum Low drift, 2.5 V voltage reference temperature coefficient: 2 ppm/°C typical 40 mA short-circuit current Wide operating ranges −40°C to +125°C temperature range 2.7 V to 5.5 V power supply range Simplified implementation User selectable gain of 1 or 2 (GAIN pin) 1.8 V logic compatibility 50 MHz serial peripheral interface (SPI) with readback or daisy chain 28-lead, 4 mm × 4 mm, RoHS compliant LFCSP

Octal, 16-Bit nanoDAC+ with 2 ppm/C Reference, I2CInterface Features: High Performance High relative accuracy (INL): ±3 LSB maximum at 16 bits Total unadjusted error (TUE): ±0.14% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.06% of FSR maximum Low drift 2.5 V reference: 2 ppm/°C typical Wide Operating Ranges −40°C to +125°C temperature range 2.7 V to 5.5 V power supply Easy Implementation User selectable gain of 1 or 2 (GAIN pin/bit) 1.8 V logic compatibility 400 kHz I2C-compatible serial interface 20-lead, RoHS-compliant TSSOP and LFCSP

Octal, 16-Bit nanoDAC+ with 2 ppm/C Reference, SPI Interface Features: High Performance High relative accuracy (INL): ±3 LSB maximum at 16 bits Total unadjusted error (TUE): ±0.14% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.06% of FSR maximum Low drift 2.5 V reference: 2 ppm/°C typical Wide Operating Ranges −40°C to +125°C temperature range 2.7 V to 5.5 V power supply range Easy Implementation User selectable gain of 1 or 2 (GAIN pin/gain bit) 1.8 V logic compatibility 50 MHz SPI with readback or daisy chain 20-lead, RoHS-compliant TSSOP and LFCSP 16-ball, RoHS compliant WLCSP (AD5676R)

16-Channel, 12-/16-BitnanoDAC+ with 2 ppm/C VoltageReference Temperature Coefficient, SPI Interface Features: High performance High relative accuracy (INL): ±4 LSB maximum at 16 bits (AD5679/AD5679R) TUE: ±0.14% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.06% of FSR maximum Low drift, 2.5 V voltage reference temperature coefficient: 2 ppm/°C typical 40 mA short-circuit current Wide operating ranges −40°C to +125°C temperature range 2.7 V to 5.5 V power supply range Simplified implementation User selectable gain of 1 or 2 (GAIN pin) 1.8 V logic compatibility 50 MHz serial peripheral interface (SPI) with readback or daisy chain 28-lead, 4 mm × 4 mm, RoHS compliant LFCSP

16-Channel, 12-/16-BitnanoDAC+ with 2 ppm/C VoltageReference Temperature Coefficient, SPI Interface Features: High performance High relative accuracy (INL): ±4 LSB maximum at 16 bits (AD5679/AD5679R) TUE: ±0.14% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.06% of FSR maximum Low drift, 2.5 V voltage reference temperature coefficient: 2 ppm/°C typical 40 mA short-circuit current Wide operating ranges −40°C to +125°C temperature range 2.7 V to 5.5 V power supply range Simplified implementation User selectable gain of 1 or 2 (GAIN pin) 1.8 V logic compatibility 50 MHz serial peripheral interface (SPI) with readback or daisy chain 28-lead, 4 mm × 4 mm, RoHS compliant LFCSP

12-Bit Current Output, Microprocessor-Compatible DAC Features:Single chip construction Double buffered latch for 8-bit P-compatibility Fast settling time: 500 ns max to 1/2 LSB High stability buried Zener reference on chip Monotinicity guaranteed over temperature Linearity guaranteed over temperature: LSB max (AD567K) Guaranteed for operation with 12 V or 15 V supplies See Data Sheet for Additional Information

Quad, 12-Bit nanoDAC+ with SPI Interface Features: High relative accuracy (INL): ±1 LSB maximum @ 12 bits Tiny package: 3 mm × 3 mm, 16-lead LFCSP Total unadjusted error (TUE): ±0.1% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.1% of FSR maximum High drive capability: 20 mA, 0.5 V from supply rails User selectable gain of 1 or 2 (GAIN pin) Reset to zero scale or midscale (RSTSEL pin) 1.8 V logic compatibility 50 MHz SPI with readback or daisy chain Low glitch: 0.5 nV-sec Low power: 1.8 mW at 3 V 2.7 V to 5.5 V power supply −40°C to +105°C temperature range

Dual, 16-Bit nanoDAC+ with 2 ppm/C Reference, SPI Interface Features: High relative accuracy (INL): ±2 LSB maximum at 16 bits  Low drift 2.5 V reference: 2 ppm/°C typical Tiny package: 3 mm × 3 mm, 16-lead LFCSP TUE: ±0.1% of FSR maximum  Offset error: ±1.5 mV maximum Gain error: ±0.1% of FSR maximum High drive capability: 20 mA, 0.5 V from supply rails  User-selectable gain of 1 or 2 (GAIN pin)  Reset to zero scale or midscale (RSTSEL pin) 1.8 V logic compatibility 50 MHz SPI with readback or daisy chain Low glitch: 0.5 nV-sec Low power: 3.3 mW at 3 V  2.7 V to 5.5 V power supply −40°C to +105°C temperature range AEC-Q100 qualified for automotive applicationsAD5689R-EP supports defense and aerospace applications (AQEC standard) Download AD5689R-EP Data Sheet (pdf) Temperature range: −55°C to +125°C Controlled manufacturing baseline 1 assembly/test site 1 fabrication site Enhanced product change notification Qualification data available on request V62/14634 DSCC Drawing Number