3.3 V Supply, Voltage Output Temperature Sensor with Signal Conditioning Features: 3.3 V, Single Supply Operation Temperature Coefficient of 28 mV/°C 100°C Temperature Span (0°C to +100°C) Accuracy Better Than 2.5% of Full Scale Linearity Better Than 0.5% of Full Scale Output Proportional to Temperature × VS Minimal Self-Heating High Level, Low Impedance Output Reverse Supply Protected

Quad Channel, 128-Position, I2C, Nonvolatile Digital Potentiometer Features: 10 kΩ and 100 kΩ resistance options Resistor tolerance: 8% maximum Wiper current: ±6 mA Low temperature coefficient: 35 ppm/°C Wide bandwidth: 3 MHz Fast start-up time < 75 μs Linear gain setting mode Single- and dual-supply operation Wide operating temperature: −40°C to +125°C 3 mm × 3 mm package

Single Channel, 64-Position, Up/Down, 8 % Resistor Tolerance, Nonvolatile Digital Potentiometer Features: Nominal resistor tolerance error: ±8% maximum Wiper current: ±6 mA Rheostat mode temperature coefficient: 35 ppm/°C Low power consumption: 2.5 μA max @ 2.7 V and 125°C Wide bandwidth: 4 MHz (5 kΩ option) Power-on EEPROM refresh time < 50 μs 50-year typical data retention at 125°C 1 million write cycles 2.3 V to 5.5 V supply operation Chip select enable multiple device operation Wide operating temperature: −40°C to +125°C Thin, 2 mm × 2 mm × 0.55 mm, 8-lead LFCSP package

AD5201 - 256-Position and 33-Position Digital PotentiometerS

2.5 V to 5.5 V, 400 A, 2-Wire Interface Quad Voltage Output 10-Bit DAC Features: Four 10-Bit DACS in 16-Lead TSSOP Low Power: 500 µA @ 5 V, 400 µA @ 3 V Power-Down to 300 nA @ 5 V, 90nA @ 3 V Guaranteed Monotonic by Design Power-On-Reset to Zero Volts Double-Buffered Input Logic Output Range: 0 V to VREF or 0 V to 2 VREF 2-Wire (I2C™ Compatible) Serial Interface Data Readback Facility; Software Clear Facility Simultaneous Update via LDAC pin (active low) Buffered/Unbuffered Reference Input Options for each DAC Temperature Range: −40°C to 105°C

2.5 V to 5.5 V, 500 A, 2-Wire Interface Quad Voltage Output 10-Bit DAC Features: Four 10-Bit DACS in 10-Lead MicroSOIC Low Power: 600 µA @ 5 V, 500 µA @ 3 V Power-Down to 200 nA @ 5 V, 80nA @ 3 V Guaranteed Monotonic by Design Power-On-Reset to Zero Volts Three Power-Down Functions Double-Buffered Input Logic Output Range: 0 V to VREF 2-Wire (I2C™ Compatible) Data Readback Facility; Software Clear Facility Simultaneous Update via LDAC bit (active low) Temperature Range: −40°C to 105°C

High Precision, Low Noise Instrumentation Amplifier Features: Low Noise: 0.2 µV p-p 0.1 Hz to 10 Hz Low Gain TC: 5 ppm max (G = 1) Low Nonlinearity: 0.001% max (G = 1 to 200) High CMRR: 130 dB min (G = 500 to 1000) Pin Programmable Gains of 1, 100, 200, 500, 1000 Low Input Offset Voltage: 25 µV, max Low Input Offset Voltage Drift: 0.25 µV/°C max Gain Bandwidth Product: 25 MHz No External Components Required Internally Compensated

16-Bit, Serial, 100 kSPS Sampling ADC. Features: Autocalibrating On-Chip Sample-Hold Function Serial Output 16 Bits No Missing Codes ±1 LSB INL –99 dB THD 92 dB S/(N+D) 1 MHz Full Power Bandwidth

Dual 12-Bit DACPORT IC

192 kHz Stereo Asynchronous Sample Rate Converter Features: Automatically Senses Sample Frequencies No Programming Required Attenuates Sample Clock Jitter 3.3 V–5 V Input and 3.3 V Core Supply Voltages Accepts 16-/18-/20-/24-Bit Data Up to 192 kHz Sample Rate Input/Output Sample Ratios from 7.75:1 to 1:8 Bypass Mode Multiple AD1896 TDM Daisy-Chain Mode Multiple AD1896 Matched-Phase Mode 142 dB Signal-to-Noise and Dynamic Range (A-Weighted, 20 Hz–20 kHz BW) Up to –133 dB THD + N

Digital Isolators isoPower Gate Driver

Low Cost, Single, 300 MHz Voltage Feedback Amplifier Features: Low cost Easy to use voltage feedback architecture High speed 300 MHz, -3 dB bandwidth (G = +1) 1400 V/µs slew rate 20 ns settling to 0.1% Low distortion: -72 dBc @ 10 MHz Low noise: 6 nV/√Hz Low dc rrrors: 5mV max VOS, 1.2 µA max IB Small packaging High output drive current: over 60 mA Excellent video specifications (RL = 150 Ω, G = +2) Gain flatness 0.1 dB to 40 MHz 0.01% differential gain error 0.02° differential phase error Drives 4 video loads (37.5 V) with 0.02% differential gain and 0.1° differential phase Low power, ±5 V supplies 5 mA typ/amplifier power supply current

Voltage References 3.0V Reference

General Purpose Amplifier 2 Circuit Rail-to-Rail 8-SOIC

Current Sense Amplifier 1 Circuit 8-MSOP

Phase Locked Loops - PLL 0010-2500MHZ Frac-N PLL

Video Amplifiers SOIC LOW COST DUAL VIDEO AMPLIFIER

Voltage-output 8-bit digital-to-analog converter, including output amplifier, full microprocessor interface and precision Features: Complete 8-bit DAC Voltage Output-2 Calibrated Ranges Internal Precision Bandgap Reference Single-Supply Operation: +5 V to +15 V Full Microprocessor Interface Fast: 1 µs Voltage settling to ±1/2 LSB Low Power: 75 mW No User Trims Guaranteed Monotonic Over Temperature All Errors Specified Tmin to Tmax Small 16-Pin DIP and 20-PIN PLCC Packages Single Laser-Wafer-Trimmed Chip for Hybrids

Low Cost 10-Bit Monolithic D/A Converter Features: Complete Current Output Converted High Stability Buried Zener Reference Laser Trimmed to High Accuracy (1/4 LSB Max Error, AD561K, T) Trimmed Output Application Resistors for 0 V to +10 V, ±5 V Ranges Fast Settling - 250 ns to 1/2 LSB Guaranteed Monotonocity Over Full Operating Temperature Range TTL/DTL and CMOS Compatible (Positive True Logic) Single Chip Monolithic Construction Available in Chip Form MIL-STD-883-Compliant Versions Available