NatureVue Video Signal Processor with Bitmap OSD, Dual HDMI Tx, and Encoder Features: Video signal processor Full 12-bit, 4:4:4 YUV internal video processing Video format conversion Frame rate conversion Motion adaptive de-interlacing with ultralow angle interpolation Cadence detection Sharpness details and picture enhancement Upscaler and downscaler to from 4k2k Color space conversion On-screen display (OSD) Internally generated bitmap-based OSD allowing overlay on one or more video outputs Overlay on 3D and 4k × 2k video formats Up to ARGB8888 with alpha blending External OSD video blending for picture and picture (PIP) support HDMI transmitters Dual 4k x 2k HDMI transmitters Audio return channel (ARC) support Dual audio insertion from TMDS Rx or from audio input pins HDCP 1.4 and EDID support Noise Shaped Video (NSV) six-DAC video encoder Six 12-bit NSV video DACs supporting multiformat video Composite (CVBS), S-Video (Y/C), and Component YPrPb (SD, ED, and HD) Professional video features Capability to output up to 36-bit TTL data Ability to synchronize output video to externally applied reference sync signals See datasheet for additional features

Low Noise, Wide Bandwidth, MEMS Accelerometer Features: Single, in-plane axis accelerometer with analog output Full-scale range: ±200 g Linear frequency response range: dc to 15 kHz typical (3 dB point) Resonant frequency: 28 kHz typical Sensitivity performance Sensitivity stability over temperature within ± 5% Linearity to ±0.2% of full-scale range Cross-axis sensitivity ± 1%/± 0.8% (z-axis acceleration effect on x-axis, y-axis acceleration effect on x-axis) Ultralow noise density 45 μg/√Hz Overrange sensing plus dc coupling allows fast recovery time Complete electromechanical self test Single-supply operation Output voltage ratiometric to supply Low power consumption: 1.0 mA typical Power saving standby operation mode with fast recovery RoHS compliant −40°C to +125°C temperature range 32-lead, 5 mm × 5 mm × 1.8 mm LFCSP package

Low Noise, Wide Bandwidth, MEMS Accelerometer Features: Single, in plane axis accelerometer with analog output Full-scale range: ±100 g Linear frequency response range: dc to 23 kHz typical (3 dB point) Resonant frequency: 42 kHz typical Ultralow noise density: 75 μg/√Hz Overrange sensing plus dc coupling allows fast recovery time Complete electromechanical self test Single-supply operation Output voltage ratiometric to supply Low power consumption: 1.0 mA typical Power saving standby operation mode with fast recovery RoHS compliant −40°C to +125°C operating temperature range 32-lead, 5 mm × 5 mm × 1.80 mm LFCSP package See datasheet for additional features

Low Cost, Single-Axis, PSI5-Compatible Satellite Sensor Features: User configurable sensor range ±120 g, ±240 g, and ±480 g PSI5 communication protocol, V2.1 compliant Asynchronous operation—PSI5-A10P-250[228]/1L Synchronous operation—PSI5-P10P-500/3L and others Daisy-chain operation with bidirectional communication Backwards compliant with PSI5 V1.3 Selectable 10- or 16-bit sensor data High accuracy interpolation routine User selectable, continuous auto-zero operation Electromechanical sensor self-test High resistance to electromagnetic interference (EMI)/ radio frequency interference (RFI) 4.5 V to 16.5 V operation Electronic serial number Qualified for automotive applications

Single-axis, High Performance Accelerometer with Dual Spectrum Signal Processing Features: Single-axis (ADXL195) and dual-axis (ADXL295) configurations ±120 g baseband acceleration channel 12-bit resolution at 62.5 mg/LSB 512 kHz data interpolation rate 40 gAVG high frequency signal processing channel 10-bit resolution at 83.3 mg avg/LSB 128 kHz data interpolation rate Sensor frequency response down to dc On-demand electromechanical self-test On-demand HF signal injection self-test Fully differential circuitry for high resistance to EMI/RFI Independent x- and y-axis sense structures for robust FMEA performance See data sheet for additional features

Low Cost 2g Dual Axis Accelerometer Features: High performance, single-/dual-axis accelerometer on a single IC chip 5 mm × 5 mm × 2 mm LCC package 1 mg resolution at 60 Hz Low power: 700 μA at VS = 5 V (typical) High sensitivity accuracy –40°C to +125°C temperature range High zero g bias stability Pulse Width Modulated Digital Outputs BW adjustment with a single capacitor Single-supply operation 3500 g shock survival RoHS-compliant Compatible with Sn/Pb- and Pb-free solder processes

Small, Low Power, 3-Axis, 16 g Accelerometer Features: 3-axis sensing with ±16 g minimum measurement range Small, low profile package 12-lead, 4 mm × 4 mm × 1.45 mm LFCSP Low quiescent supply current: 350 µA typical Single-supply operation: 1.8 V to 3.6 V 10,000 g shock survivalExcellent temperature stabilityBandwidth (BW) adjustment with a single capacitor per axisRoHS/WEEE lead-free compliant40C to +105C operating temperature rangeQualified for automotive applications

Small and Thin, 5 g Accelerometer Features: Small and thin 4 mm × 4 mm × 1.45 mm LFCSP package 2 mg resolution at 60 √Hz Wide supply voltage range: 2.4 V to 5.25 V Low power: 350 µA at Vs = 2.4 V (typ) Good zero gbias stability Good sensitivity accuracy X-axis and Y-axis aligned to within 0.1° (typ) BW adjustment with a single capacitor Single-supply operation 10,000 g shock survival Compatible with Sn/Pb and Pb-free solder processes

Low Noise, Low Drift, Low Power, 3-Axis MEMS Accelerometer Features: Hermetic package offers optimal long-term stability 0 g offset vs. temperature (all axes): 0.75 mg/°C maximum Ultralow noise spectral density (all axes): 75 g/Hz Low power, VSUPPLY (LDO regulator enabled) Measurement mode: 150 μA Standby mode: 21 μA User adjustable analog output bandwidth Integrated temperature sensor Voltage range options VSUPPLY with internal regulators: 2.25 V to 3.6 V V1P8ANA, V1P8DIG with internal LDO regulator bypassed: 1.8 V typical 10% Operating temperature range: 40C to +125C 14-terminal, 6 mm 5.6 mm 2.2 mm, LCC packageADXL356-EP supports defense and aerospace applications (AQEC standard)Download ADXL356-EP Data Sheet (pdf)Military temperature range: −55°C to +125°CControlled manufacturing baselineOne assembly/test siteOne fabrication siteProduct change notificationQualification data available on requestV62/18610 DSCC Drawing Number

Ultralow noise, dual-axis MEMS Gyroscope for Stabilization Applications Features: Pitch and roll rate gyroscope Ultralow noise: 0.004°/s/√Hz High vibration rejection over a wide frequency range Power saving standby mode 80 µA current consumption in standby mode Fast startup time from standby mode: <100 ms Low delay of <0.5 ms for a 30 Hz input at the widest bandwidth setting Serial peripheral interface (SPI) digital output Programmable high-pass and low-pass filters 2000 g powered acceleration survivability 2.7 V to 5.0 V operation −25°C to +85°C operation 4.5 mm × 5.8 mm × 1.2 mm cavity laminate package

High Stability, Low Noise Vibration Rejecting Yaw Rate Gyroscope Features: Complete rate gyroscope on a single chip Z-axis (yaw rate) response 12°/hour bias stability 0.01°/√second angle random walk High vibration rejection over wide frequency Measurement range extendable to a maximum of ±450°/sec 10,000 g powered shock survivability Ratiometric to referenced supply 6 V single-supply operation See data sheet for additional featuresADXRS646-EP supports defense and aerospace applications (AQEC standard) Download ADXRS646-EP data sheet (pdf) Temperature range: −55°C to +105°C Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/14618 DSCC Drawing Number

10 MHz, 14.5 nV/Hz, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier Features: Power supply rejection ratio (PSRR): 98 dB minimum  Common-mode rejection ratio (CMRR): 95 dB minimum Offset voltage: 120 μV maximum Single-supply operation: 2.7 V to 5.5 V  Dual-supply operation: ±1.35 V to ±2.75 V  Wide bandwidth: 10 MHz  Rail-to-rail input and output  Low noise 2 μV p-p from 0.1 Hz to 10 Hz  14.5 nV/√Hz at 1 kHz  Very low input bias current: 2 pA maximum

3.1 nV/Hz, 1 mA, 180 MHz,Rail-to-Rail Input/Output Amplifier Features: Low Noise 3.1 nV/√Hz at 100 kHz 0.7 pA/√Hz at 100 kHz Low Distortion (HD2/HD3) -141/-144 dBc at 1 kHz -112/-115 dBc at 100 kHz -84/-79 dBc at 1 MHz High speed performance -3dB bandwidth: 180 MHz Slew Rate: 225 V/µs 0.1% Settling Time: 47 ns Low input offset voltage and drift ±20 / ±125 µV (typical / max) 0.7 / 3.7 µV/°C (typical / max) Low input offset current and drift 8 / 100 nA (typical / max) 30 / 250 pA/°C (typical / max) Rail-to-Rail Input and Output Low quiescent current: Enabled: 1 mA at ±5V Disabled: 2.4 µA at ±5V Wide supply range: 2.7V to 11V Small Packaging: 10-lead 3 mm x 3 mm LFCSP and8-lead MSOP

Ultralow Power, Low Distortion ADC Driver Features: Small signal bandwidth: 260 MHz Ultralow power 1.25mA Extremely low harmonic distortion −122 dB THD at 50 kHz −96 dB THD at 1 MHz Low input voltage noise: 3.9 nV/√Hz 0.35 mV maximum offset voltage Balanced outputs Settling time to 0.1%: 34 ns Rail-to-rail output: −VS + 0.1 V to +VS − 0.1 V Adjustable output common-mode voltage Flexible power supplies: 3 V to 7 V (LFCSP) Disable pin to reduce power consumption Available in LFCSP and SOIC packages

High Speed, 0.1 V/C Offset Drift, Fully Differential ADC Driver Features: Broad power supply range: 3 V to 10 V Wide input common-mode voltage range: −VS to +VS − 1.3 V Rail-to-rail output Fully specified dual power mode operation 4 mA full power mode (145 MHz) 1.4 mA low power mode (80 MHz) Full power mode Low harmonic distortion −133 dBc HD2 and −140 dBc HD3 at 1 kHz −133 dBc HD2 and −116 dBc HD3 at 100 kHz Fast settling time 18-bit: 100 ns 16-bit: 50 ns Input voltage noise: 1.8 nV/√Hz, f = 100 kHz ±115 μV maximum offset voltage from −40°C to +125°C Adjustable output clamps for ADC input protection

High-Speed Differential Amplifier Features: High CMRR: 100 dB Typ Low Nonlinearity: 0.001% Max Low Distortion: 0.001% Typ Wide Bandwidth: 3 MHz Typ Fast Slew Rate: 9.5 V/µs Typ Fast Settling (0.01%): 1µs Typ Low Cost

Precision Single Supply Instrumentation Amplifier Features: Single Supply Operation Low Supply Current: 700 µA Max Wide Gain Range: 1 to 1000 Low Offset Voltage: 150 µV Max Zero-In/Zero-Out Single-Resistor Gain Set 8-Lead Mini-DIP and SO Packages

12-Bit Current-Out DAC in TSSOP-8 Package Features: Compact SO-8 and TSSOP Package True 12-Bit Accuracy 5 V Operation @ < 10 µA Fast 3-Wire Serial Input Fast 1 µs Settling Time 2.4 MHz 4-Quadrant Multiply BW Pin-for-Pin Upgrade for DAC8043 Standard and Rotated Pinout

12-Bit Current-Out DAC in TSSOP-8 Package Features: Compact SO-8 and TSSOP Package True 12-Bit Accuracy 5 V Operation @ < 10 µA Fast 3-Wire Serial Input Fast 1 µs Settling Time 2.4 MHz 4-Quadrant Multiply BW Pin-for-Pin Upgrade for DAC8043 Standard and Rotated Pinout

Micropower Sampling 12-Bit A/D Converters In S0-8 Packages Features: 12-Bit Resolution 8-Pin SOIC Plastic Package Low Cost Low Supply Current: 250µA Typ. Auto Shutdown to 1nA Typ. Guaranteed ±3/4LSB Max DNL Single Supply 5V to 9V Operation On-Chip Sample-and-Hold 60µs Conversion Time Sampling Rates: 12.5 ksps (LTC1286) 11.1 ksps (LTC1298) I/O Compatible with SPI, Microwire, etc. Differential Inputs (LTC1286) 2-Channel MUX (LTC1298) 3V Versions Available: LTC1285/LTC1288