High Stability Isolated Error Amplifier Features: Stable over time and temperature 0.5% initial accuracy 1% accuracy over the full temperature range Compatible with Type II or Type III compensation networks Reference voltage: 1.225 V Compatible with DOSA Low power operation: <7 mA total Wide voltage supply range: 3.0 V to 20 V (VDD1 and VDD2) Output -3 dB bandwidth: 400 kHz typical Isolation voltage: 5 kV rms reinforced See data sheet for additional featuresADuM4190-EP supports defense and aerospace applications (ADEQ standard) Download ADuM4190-EP data sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/17602 DSCC Drawing Number

High Stability Isolated Error Amplifier Features: Stable over time and temperature 0.5% initial accuracy 1% accuracy over the full temperature range Compatible with Type II or Type III compensation networks Reference voltage: 1.225 V Compatible with DOSA Low power operation: <7 mA total Wide voltage supply range: 3.0 V to 20 V (VDD1 and VDD2) Output -3 dB bandwidth: 400 kHz typical Isolation voltage: 5 kV rms reinforced See data sheet for additional featuresADuM4190-EP supports defense and aerospace applications (ADEQ standard) Download ADuM4190-EP data sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/17602 DSCC Drawing Number

5 KV rms Isolated Precision Half-Bridge Driver, 4 A Output Features: 4 A peak output current Working voltage High-side or low-side relative to input: 537 V peak High-side to low-side differential: 800 V peak High frequency operation: 1 MHz maximum  3.3 V to 5 V CMOS input logic 4.5 V to 18 V output drive  UVLO at 2.5 V VDD1 ADuM3223A/ADuM4223A UVLO at 4.1 V VDD2 ADuM3223B/ADuM4223B UVLO at 7.0 V VDD2 ADuM3223C/ADuM4223C UVLO at 11.0 V VDD2 Precise timing characteristics  54 ns maximum isolator and driver propagation delay 5 ns maximum channel-to-channel matching CMOS input logic levels  High common-mode transient immunity:>25 kV/μs Enhanced system-level ESD performance per IEC 61000-4-x  High junction temperature operation: 125°C  Thermal shutdown protection  Default low output Safety and regulatory approvals ADuM4223 wide-body, 16-lead SOIC UL recognition per UL 1577  5000 V rms for 1 minute SOIC long package  CSA Component Acceptance Notice 5A  VDE certificate of conformity  DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 849 V peak  Qualified for automotive applications

5 kV RMS Quad-Channel Digital Isolators Features: Enhanced system-level ESD performance per IEC 61000-4-x Safety and regulatory approvals (RI-16 package) UL recognition: 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice #5A IEC 60601-1: 250 V rms (reinforced) IEC 60950-1: 400 V rms (reinforced) VDE Certificate of Conformity DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 846 V peak Low power operation 5 V operation 1.4 mA per channel maximum @ 0 Mbps to 2 Mbps 4.3 mA per channel maximum @ 10 Mbps 34 mA per channel maximum @ 90 Mbps 3.3 V operation 0.9 mA per channel maximum @ 0 Mbps to 2 Mbps 2.4 mA per channel maximum @ 10 Mbps 20 mA per channel maximum @ 90 Mbps Bidirectional communication 3.3 V/5 V level translation High temperature operation: 105°C High data rate: dc to 90 Mbps (NRZ) Precise timing characteristics 2 ns maximum pulse width distortion 2 ns maximum channel-to-channel matching High common-mode transient immunity: >25 kV/μs Output enable function 16-lead SOIC wide body package version (RW-16) 16-lead SOIC wide body enhanced creepage version (RI-16)

5 kV RMS Quad-Channel Digital Isolators Features: Enhanced system-level ESD performance per IEC 61000-4-x Safety and regulatory approvals (RI-16 package) UL recognition: 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice #5A IEC 60601-1: 250 V rms (reinforced) IEC 60950-1: 400 V rms (reinforced) VDE Certificate of Conformity DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 846 V peak Low power operation 5 V operation 1.4 mA per channel maximum @ 0 Mbps to 2 Mbps 4.3 mA per channel maximum @ 10 Mbps 34 mA per channel maximum @ 90 Mbps 3.3 V operation 0.9 mA per channel maximum @ 0 Mbps to 2 Mbps 2.4 mA per channel maximum @ 10 Mbps 20 mA per channel maximum @ 90 Mbps Bidirectional communication 3.3 V/5 V level translation High temperature operation: 105°C High data rate: dc to 90 Mbps (NRZ) Precise timing characteristics 2 ns maximum pulse width distortion 2 ns maximum channel-to-channel matching High common-mode transient immunity: >25 kV/μs Output enable function 16-lead SOIC wide body package version (RW-16) 16-lead SOIC wide body enhanced creepage version (RI-16)

Isolated Switch Regulator with Quad-Channel Isolators (0/4 Channel Directionality) Features: For 2500 V rms isolation - Please visit the ADuM3474 product page Isolated PWM feedback with built in compensation Primary side transformer driver for up to 2.5 W output power with 5 V input voltage Regulated adjustable output:  3.3 V to 24 V Up to 80% efficiency Quad dc-to-25 Mbps (NRZ) signal isolation channels 200 kHz to 1 MHz adjustable oscillator Soft start function at power-up Pulse-by-pulse overcurrent protection Thermal shutdown 5000 V rms isolation High common-mode transient immunity: >25 kV/µs 20-lead SOIC package with  8.3 mm creepage High temperature operation: 105°C

Low Emission Isolated DC to DC Converter Features: isoPower integrated, isolated dc-to-dc converter 100 mA output current for ADuM5020 60 mA output current for ADuM5028 Meets CISPR22 Class B emissions limits at full load on a 2-layer PCB 16-lead SOIC_W package with 7.8 mm minimum creepage 8-lead SOIC_IC package with 8.3 mm minimum creepage High temperature operation: 125°C maximum Safety and regulatory approvals UL recognition (pending) 3000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (pending) VDE certificate of conformity (pending) VDE V 0884-10 VIORM = 565 V peak CQC certification per GB4943.1-2011 (pending) 

Low Emission Isolated DC to DC Converter Features: isoPower integrated, isolated dc-to-dc converter 100 mA output current for ADuM5020 60 mA output current for ADuM5028 Meets CISPR22 Class B emissions limits at full load on a 2-layer PCB 16-lead SOIC_W package with 7.8 mm minimum creepage 8-lead SOIC_IC package with 8.3 mm minimum creepage High temperature operation: 125°C maximum Safety and regulatory approvals UL recognition (pending) 3000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (pending) VDE certificate of conformity (pending) VDE V 0884-10 VIORM = 565 V peak CQC certification per GB4943.1-2011 (pending) 

Low Emission Isolated DC to DC Converter Features: isoPower integrated, isolated dc-to-dc converter 100 mA output current for ADuM5020 60 mA output current for ADuM5028 Meets CISPR22 Class B emissions limits at full load on a 2-layer PCB 16-lead SOIC_W package with 7.8 mm minimum creepage 8-lead SOIC_IC package with 8.3 mm minimum creepage High temperature operation: 125°C maximum Safety and regulatory approvals UL recognition (pending) 3000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (pending) VDE certificate of conformity (pending) VDE V 0884-10 VIORM = 565 V peak CQC certification per GB4943.1-2011 (pending) 

Dual-Channel Isolators with Integrated DC-to-DC Converter(0/2 channel directionality) Features: For AEC-Q100 Automotive Qualified Devices Specifications - Please View ADuM520xW Datasheet. isoPower® integrated isolated DC/DC converter Regulated 3V or 5V output Up to 500 mW output power Dual dc-to-25 Mbps (NRZ) signal isolation channels Schmitt Trigger Inputs 16-lead SOIC package with >8 mm creepage High temperature operation: 105°C maximum High common-mode transient immunity: > 25 kV/µs Safety and regulatory approvals UL recognition 2500 V rms for 1 minute per UL 1577 CSA component accept notice #5A (pending) VDE cert of conformity (pending) DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12 VIORM = 560 VPEAK

Dual-Channel Isolators with Integrated DC-to-DC Converter (0/2 Channel Directionality) Features: isoPower integrated, isolated dc-to-dc converter Regulated 3.15 V to 5.25 V output Up to 150 mW output power Dual dc-to-100 Mbps (NRZ) signal isolation channels Soft start power supply 20-lead SSOP package with 5.3 mm creepage Supports SPI up to 15 MHz High temperature operation: 105°C High common-mode transient immunity: >25 kV/μs Safety and regulatory approvals UL recognition 2500 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A VDE certificate of conformity DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 560 V peak

Quad-Channel, 2.5 kV Isolators with Integrated DC-to-DC Converter (2/2 channel directionality) Features: isoPower integrated, isolated dc-to-dc converter Regulated 3.3 V or 5.0 V output Up to 500 mW output power Quad dc-to-25 Mbps (NRZ) signal isolation channels 16-lead SOIC package with 7.6 mm creepage High temperature operation: 105°C maximum High common-mode transient immunity: >25 kV/μs Safety and regulatory approvals UL recognition 2500 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A VDE certificate of conformity IEC 60747-5-2 (VDE 0884, Part 2) VIORM = 560 V peak CQC certification per GB4943.1-2011

Quad-Channel, 2.5 kV Isolators with Integrated DC-to-DC Converter (0/4 channel directionality) Features: isoPower integrated, isolated dc-to-dc converter Regulated 3.3 V or 5.0 V output Up to 500 mW output power Quad dc-to-25 Mbps (NRZ) signal isolation channels 16-lead SOIC package with 7.6 mm creepage High temperature operation: 105°C maximum High common-mode transient immunity: >25 kV/μs Safety and regulatory approvals UL recognition 2500 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A VDE certificate of conformity IEC 60747-5-2 (VDE 0884, Part 2) VIORM = 560 V peak CQC certification per GB4943.1-2011

Low Emission, 5 kV Isolated DC-to-DC Converters Features: isoPower integrated, isolated dc-to-dc converter 100 mA output current for ADuM6020 AEC-Q100 qualified for automotive applications Meets CISPR22 Class B emissions limits at full load on a 2layer PCB 16-lead SOIC_IC package with 8.3 mm minimum creepage High temperature operation: 125°C maximum Safety and regulatory approvals UL recognition 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A VDE certificate of conformity VDE V 0884-10 VIORM = 565 V peak CQC certification per GB4943.1-2011

Low Emission, 5 kV Isolated DC-to-DC Converters Features: isoPower integrated, isolated dc-to-dc converter 100 mA output current for ADuM6020 AEC-Q100 qualified for automotive applications Meets CISPR22 Class B emissions limits at full load on a 2layer PCB 16-lead SOIC_IC package with 8.3 mm minimum creepage High temperature operation: 125°C maximum Safety and regulatory approvals UL recognition 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A VDE certificate of conformity VDE V 0884-10 VIORM = 565 V peak CQC certification per GB4943.1-2011

Low Emission, 5 kV Isolated DC-to-DC Converters Features: isoPower integrated, isolated dc-to-dc converter 60 mA output current for ADuM6028 AEC-Q100 qualified for automotive applications Meets CISPR22 Class B emissions limits at full load on a 2layer PCB 8-lead SOIC_IC package with 8.3 mm minimum creepage High temperature operation: 125°C maximum Safety and regulatory approvals UL recognition 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A VDE certificate of conformity VDE V 0884-10 VIORM = 565 V peak CQC certification per GB4943.1-2011

Quad-Channel Isolators with Integrated DC/DC Converter (2/2 channel directionality) Features: isoPower integrated, isolated DC/DC converter Regulated 3.3 V or 5 V output Up to 400 mW output power Schmitt trigger inputs 16-lead SOIC package with 7.6 mm creepage High temperature operation: 105°C High common-mode transient immunity: >25 kV/μs See data sheet for additional features

Quad-Channel Isolators with Integrated DC/DC Converter (1/3 channel directionality) Features: isoPower integrated, isolated DC/DC converter Regulated 3.3 V or 5 V output Up to 400 mW output power Quad dc-to-25 Mbps (NRZ) signal isolation channels Schmitt trigger inputs 16-lead SOIC package with 7.6 mm creepage High temperature operation: 105°C High common-mode transient immunity: >25 kV/μs See data sheet for additional features

Quad-Channel Isolators with Integrated DC/DC Converter (1/3 channel directionality) Features: isoPower integrated, isolated DC/DC converter Regulated 3.3 V or 5 V output Up to 400 mW output power Quad dc-to-25 Mbps (NRZ) signal isolation channels Schmitt trigger inputs 16-lead SOIC package with 7.6 mm creepage High temperature operation: 105°C High common-mode transient immunity: >25 kV/μs See data sheet for additional features

Quad-Channel Isolators with Integrated DC-to-DC Converter (4:0 directionality) Features: isoPower integrated, isolated dc-to-dc converter 100 mA output supply AEC-Q100 qualified for automotive applications ADuM6421AW (ADuM6423AW pending) Meets CISPR 32/EN55032 Class B emission limits up to 5 Mbps at a full load on a 2-layer PCB Quad dc to 100 Mbps signal isolation channels 28-lead, fine pitch, SOIC with 8.3 mm minimum creepage High temperature operation: 125°C maximum High common-mode transient immunity: 100 kV/μs Safety and regulatory approvals (pending) UL recognition (pending) 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A (pending) VDE V 0884-11 certificate of conformity (pending) VIORM = 566 V peak CQC certification per GB4943.1-2011 (pending)