Precision Micropower Shunt Mode Voltage Reference Applications (2.5 Vout) Features: Ultracompact SC70 and SOT-23 packages Low temperature coefficient: 75 ppm/°C (maximum) Pin compatible with LM4040/LM4050 Initial accuracy: ±0.1% No external capacitor required Wide operating current range: 50 µA to 15 mA Extended temperature range: −40°C to +125°C Qualified for automotive applications

RF Amplifier IC VSAT 3.4GHz ~ 3.8GHz 16-QFN (3x3)

Low Cost, 2.7 V to 5.5 V, Micropower Temperature Switch in SOT-23 (Monitors Temps from +35C to +115C) Features: ±0.5°C (typical) threshold accuracy Factory-set trip points from −45°C to +15°C in 10°C increments  +35°C to +115°C in 10°C increments Push-pull output (ADT6502/ADT6504) No external components required Maximum temperature of 125°C See datasheet for additional features

Dual-Channel, Digital Isolator, Enhanced System-Level ESD Reliability Features: Enhanced system-level ESD performance per IEC 61000-4-x  High temperature operation: 125°C Narrow body, RoHS-compliant, 8-lead SOIC Low power operation  5 V operation (refer to data sheet) 3.3 V operation (refer to data sheet) Bidirectional communication 3.3 V/5 V level translation See data sheet for additional featuresADuM3201-EP supports defense and aerospace applications (AQEC standard) Download ADuM3201-EP data sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline  Enhanced product change notification  Qualification data available on request Qualified for automotive applications Automotive versions qualified per AEC-Q100 V62/14640 DSCC Drawing Number

3 kV rms Isolated Precision Half-Bridge Driver, 4 A Output Features: 4 A peak output current Working voltage High-side or low-side relative to input: 537 V peak High-side to low-side differential: 800 V peak High frequency operation: 1 MHz maximum  3.3 V to 5 V CMOS input logic 4.5 V to 18 V output drive  UVLO at 2.5 V VDD1 ADuM3223A/ADuM4223A UVLO at 4.1 V VDD2 ADuM3223B/ADuM4223B UVLO at 7.0 V VDD2 ADuM3223C/ADuM4223C UVLO at 11.0 V VDD2 Precise timing characteristics  54 ns maximum isolator and driver propagation delay 5 ns maximum channel-to-channel matching CMOS input logic levels  High common-mode transient immunity:>25 kV/μs Enhanced system-level ESD performance per IEC 61000-4-x  High junction temperature operation: 125°C  Thermal shutdown protection  Default low output Safety and regulatory approvals ADuM3223 narrow-body, 16-lead SOIC  UL recognition per UL 1577  3000 V rms for 1 minute SOIC long package  CSA Component Acceptance Notice 5A  VDE certificate of conformity  DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 560 V peak  Qualified for automotive applications

Dual-Channel, 5 kV Isolators with Integrated DC/DC Converter (1/1 channel directionality) Features: isoPower integrated, isolated DC/DC converter Regulated 5 V or 3.3 V output Up to 400 mW output power Dual dc-to-25 Mbps (NRZ) signal isolation channels 16-lead SOIC package with 7.6 mm creepage High temperature operation: 105°C maximum High common-mode transient immunity: >25 kV/μs Safety and regulatory approvals UL recognition (pending) 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice #5A IEC 60601-1: 125 V rms See datasheet for additional features

ADV476 - CMOS Monolithic 256 X 18 Color PALETTE RAM-DAC

CMOS, 240 MHz, 10-Bit, High Speed Video DAC Features: 240 MSPS throughput rate 10-bit digital-to-analog converter (DAC) RS-343A-/RS-170-compatible output Complementary outputs DAC output current range: 2 mA to 18.5 mA TTL-compatible inputs Internal voltage reference Single supply 5 V or 3.3 V operation 24-lead thin shrink small outline package (TSSOP) package Low power dissipation Low power standby mode Power-down mode Industrial temperature range (−40°C to +85°C)

3.3V, Full Duplex, 840uA, 20Mbps, EIA RS-485 Transceiver Features: Operates with 3.3 V supply EIA RS-422 and RS-485 compliant over full CM range 19 kΩ input impedance Up to 50 transceivers on bus 20 Mbps data rate Short-circuit protection Specified over full temperature range Thermal shutdown Interoperable with 5 V logic 840 μA supply current 2 nA shutdown current See data sheet for additional features

Ultralow Power, Active High Shutdown and an Active Low Receiver Enable Features: RS-232 Compatible  Operates with 3 V or 5 V Logic  Ultralow Power CMOS: 1.3 mA Operation  Low Power Shutdown: 0.2 µA  Suitable for Serial Port Mice 116 kbits/s Data Rate  1 µF Charge Pump Capacitors  Single +3 V to +3.6 V Power Supply  Two Receivers Active in Shutdown (ADM560) 

Supervisory Circuit with Watchdog, Manual Reset, and Active-Low/Push-Pull Features: 26 reset threshold options 2.5 V to 5 V in 100 mV increments 4 reset timeout options 1 ms, 20 ms, 140 ms, and 1120 ms (minimum) 4 watchdog timeout options 6.3 ms, 102 ms, 1600 ms, and 25.6 sec (typical) Manual reset input Reset output stages Push-pull active low Open-drain active low Push-pull active high Low power consumption: 5 μA Guaranteed reset output valid to VCC = 1 V Power supply glitch immunity Specified over industrial temperature range 5-lead SOT-23 package

3 V, Voltage Monitoring Microprocessor Supervisory Circuit Features: Guaranteed RESET valid with VCC = 1 V 190 μA quiescent current Precision supply voltage monitor 4.40 V (ADM706/ADM708) 200 ms reset pulse width Debounced TTL/CMOS manual reset input (MR) Independent watchdog timer (ADM705/ADM706) 1.60 sec timeout (ADM705/ADM706) Voltage monitor for power fail or low battery warning Superior upgrade for MAX705 to MAX708

600 mA, Ultralow Noise, High PSRR, RF Linear Regulator Features: Input voltage range: 2.3 V to 5.5 V Output voltage range: 1.2 V to 3.4 V Maximum load current: 600 mA Low noise 0.9 μV rms total integrated noise from 100 Hz to 100 kHz 1.6 μV rms total integrated noise from 10 Hz to 100 kHz Noise spectral density: 1.5 nV/√Hz from 10 kHz to 1 MHz PSRR: >90 dB from 200 Hz to 200 kHz; 57 dB at 1 MHz Dropout voltage: 120 mV typical at VOUT = 3.3 V, IOUT = 600 mA Initial accuracy: ±0.5% Accuracy over line, load, and temperature: −2.0% (minimum), +1.5% (maximum) Quiescent current, IGND = 4 mA at no load Low shutdown current: 0.2 μA Stable with a 10 μF ceramic output capacitor 8-lead LFCSP and 8-lead SOIC packages Precision enable Supported by ADIsimPower tool

800 mA, Ultra Low Noise/High PSRR LDO Features: Input voltage range: 4.5 V to 16 V Maximum output current: 800 mA Low Noise: 1.0 μVRMS Total Integrated Noise from 100 Hz to 100 KHz 1.6 μVRMS Total Integrated Noise from 10 Hz to 100 KHz Noise Spectral Density <1.7nV√Hz above 10 KHz PSRR of >90 dB from 1 KHz to 100 KHz, >60dB @ 1 MHz, VOUT = 5V Dropout voltage: 600 mV @ VOUT = 5 V/800 mA load Initial accuracy: ±1% Accuracy over line, load, and temperature: ±2% Quiescent Current, IGND = 4.3 mA @ No Load Low shutdown current: 0.1 μA Stable with a 10 μF ceramic output capacitor Fixed output voltage options: 1.8 V, 2.8 V, 3.0 V, 3.3 V and 5.0 V (16 outputs between 1.5 V and 5.0 V are available) 8-lead LFCSP package and SOIC package

Ultralow Noise, 200 mA, Linear Regulator Features: PSRR performance of 54 dB at 100 kHz Ultralow noise independent of VOUT 3 μV rms, 0.1 Hz to 10 Hz 9.5 μV rms, 0.1 Hz to 100 kHz 9 µV rms, 10Hz to 100KHz 17 µV rms, 10Hz to 1MHz Low dropout voltage: 150 mV at 200 mA load Maximum output current: 200 mA Input voltage range: 2.2 V to 5.5 V Low quiescent and shutdown current Initial accuracy: ±1% Accuracy over line, load, and temperature: −2.5%/+1.5% 5-lead TSOT package and 6-lead LFCSP package

Supervisory Circuit with Watchdog and Manual Reset in 5-Lead SC70 and SOT-23 Features: Precision 2.5 V to 5 V power supply monitor 7 reset threshold options: 2.19 V to 4.63 V 140 ms (minimum) reset timeout Manual reset input (ADM823, ADM825) Low power consumption (5 μA) Push-pull output stages  RESET (ADM823)  RESET, RESET (ADM824/ADM825) Watchdog timer with 1.6 sec timeout (ADM823, ADM824) See Data Sheet for Additional Information

Supervisory Circuit with Watchdog and Manual Reset in 5-Lead SC70 and SOT-23 Features: Precision 2.5 V to 5 V power supply monitor 7 reset threshold options: 2.19 V to 4.63 V 140 ms (minimum) reset timeout Manual reset input (ADM823, ADM825)Push-pull output stages RESET (ADM823) RESET, RESET (ADM824/ADM825) Watchdog timer with 1.6 sec timeout (ADM823, ADM824) Low power consumption (5 μA) See Data Sheet for Additional Information

Supervisory Circuit with Windowed Watchdog, Manual Reset, and Active-Low Push-Pull Reset Output Features: Windowed watchdog, 8 timeout options 26 reset threshold options 2.5 V to 5 V in 100 mV increments 4 reset timeout options 1 ms, 20 ms, 140 ms, and 1120 ms (minimum) Manual reset input Open-drain or push-pull RESET outputs Low power consumption Specified over wide temperature range (−40°C to +125°C) Qualified for automotive applications 5-lead SOT-23 package

Low Voltage Supervisory Circuit with Watchdog in 4-Lead SC70 Features: Precision 1.8 V to 5 V power supply monitoring 9 RESET threshold options 1.58 V to 4.63 V 4 RESET timeout options 1 ms, 20 ms, 140 ms, 1120 ms 3 watchdog timeout options 6.3 ms, 102 ms, 1.6 sec RESET output stages Push-pull active-low (ADM8616) Low power consumption (5 μA) Guaranteed reset output valid to VCC = 1 V Power supply glitch immunity Specified over −40°C to +85°C temperature range 4-lead SC70 package

Ultracompact, 1 A Thermoelectric Cooler (TEC) Driver for Digital Control Systems Features: Patented high efficiency single inductor architecture Integrated low RDSON MOSFETs for TEC driver TEC voltage and current operation monitoring No external sense resistor required Programmable maximum TEC voltage External synchronization  Independent TEC heating and cooling current limit settings 2 MHz PWM switching frequency Digital thermal control loop compatible 2.50 V reference output with 1% accuracy Available in a 25-ball, 2.5 mm x 2.5 mm WLCSP or in a 24-lead, 4 mm x 4 mm LFCSP