No RSENSE Current Mode Boost DC/DC Controller Features:No Current Sense Resistor RequiredVOUT up to 60VConstant Frequency 550kHz OperationInternal Soft-Start and Optional External Soft-StartAdjustable Current LimitPulse Skipping at Light LoadVIN Range: 2.75V to 9.8V±1.5% Voltage Reference AccuracyCurrent Mode Operation for Excellent Line and Load Transient ResponseLow Profile (1mm) SOT-23 and 2mm × 3mm DFN Packages

0.01MHz to 4GHz Low Power Active Mixer Features: Up or Downconverting Applications Noise Figure: 9.3dB Typical at 900MHz Output Conversion Gain: 2.4dB Typical IIP3: 9dBm Typical at ICC = 10mA Adjustable Supply Current: 4mA to 13.4mA Low LO Drive Level: –2dBm Single-Ended or Differential LO High Port-to-Port Isolation Enable Control with Low Off-State Leakage Current Single 2.7V to 5V Supply Small 3mm × 3mm DFN Package

Negative Voltage Hot Swap Controllers with ADC and IC Monitoring Features:Allows Safe Insertion into Live –48V Backplanes10-Bit ADC Monitors Current and VoltagesI2C/SMBus Interface or Single-Wire Broadcast ModeFloating Topology Allows Very High Voltage OperationIndependently Adjustable Inrush and Overcurrent LimitsControlled Soft-Start InrushAdjustable UV/OV Thresholds and HysteresisSequenced Power Good Outputs with DelaysAdjustable Power Good Input TimeoutProgrammable Latchoff or Auto-Retry After FaultsAlerts Host After FaultsAvailable in 28-Lead Narrow SSOP and 24-Lead (4mm × 5mm) QFN Packages

Clock Generator with Fractional-N PLL & Integrated VCO SMT, 125 - 3000 MHz Features: Frequency Range: 125 - 3000 MHz 78 fs RMS Jitter Generation (Typical) Exceeds G.8251 & GR-253-CORE Jitter Specifications -165 dBc/Hz Phase Noise floor Maximum Phase Detector Rate 100 MHz Figure of Merit (FOM) -227 dBc/Hz 24-Bit Step Size, Resolution 3 Hz Typical Exact Frequency Mode Built-in Digital Self Test 40 Lead 6x6mm SMT Package: 36mm2

50 dB, Logarithmic Detector, 1 - 23 GHz Features: Wide Input Bandwidth: 1 to 23 GHz Wide Dynamic Range: 50 dB up to 23 GHz Single Positive Supply: +3.3V Excellent Stability Over Temperature Fast Rise / Fall Time: 12 / 65 ns 16 Lead 3x3 mm SMT Package: 9mm²

10 W (40 dBm), 0.01 GHz to 1.1 GHz, GaN Power Amplifier Features: High small signal gain: 20 dB typical POUT: 41.5 dBm typical at PIN = 27 dBm High PAE: 60% typical at PIN = 27 dBm Instantaneous bandwidth: 0.01 GHz to 1.1 GHz across all frequencies Supply voltage: VDD = 28 V at a quiescent current of 100 mA Internal prematching Simple and compact external tuning for optimal performance 5 mm × 5 mm, 32-lead LFCSP

RMS Power Detector & Envelope Tracker, DC - 3.9 GHz Features: Broadband Single-Ended RF Input RMS Detector with ±1 dB Detection Accuracy to 3.9 GHz Input Dynamic Range: -60 dBm to +8 dBm ±1 dB Envelope Detection Accuracy over 30 dB Input Range Envelope Detection Bandwidth > 150 MHz Digitally Programmable Integration Bandwidth  Power-Down Mode 24 Lead 4x4mm SMT Package: 16mm² Envelope Tracking Power-Down Mode

GaAs MMIC 6-BIT Digital Phase Shifter, 4.8 - 6.2 GHz Features: Low RMS Phase Error: 2.8° Low Insertion Loss: 5 dB High Linearity: +46 dBm Positive Control Logic 360° Coverage, LSB = 5.625° 32 Lead 5x5mm SMT Package: 25mm2

9.65 GHz to 10.41 GHz MMIC VCO with Half Frequency Output Features: Dual output frequency range fOUT = 9.65 GHz to 10.41 GHz fOUT/2 = 4.825 GHz to 5.205 GHz Output power (POUT): 11 dBm Single-sideband (SSB) phase noise: −114 dBc/Hz at 100 kHz No external resonator needed RoHS-compliant, 5 mm × 5 mm, 32-lead LFCSP: 25 mm²

11.41 GHz to 12.62 GHz MMIC VCO with Half Frequency Output Features: Dual output frequency range fOUT = 11.41 GHz to 12.62 GHz fOUT/2 = 5.705 GHz to 6.31 GHz Output power (POUT): 11 dBm Single-sideband (SSB) phase noise: −115 dBc/Hz at 100 kHz No external resonator needed RoHS-compliant, 5 mm × 5 mm, 32-lead LFCSP: 25 mm2

5 GHz to 12 GHz GaAs, MMIC, Fundamental Mixer Features: Low conversion loss: 9 dB No dc bias and no external matching required Ideal for upconversion and downconversion Wideband IF range: DC to 4 GHz Ultrasmall package: 8-Lead MINI_SO_EP

GaAs MMIC SP6T Non-Reflective Switch, DC - 3 GHz Features: Low insertion loss (2 GHz): 1.0 dB Single positive supply: VDD = +3V to +5V Integrated 3:6 TTL decoder 24 lead QSOP package

GaAs MMIC SP8T Non-reflective Switch SMT, DC to 3.5 GHz Features: Ceramic, RoHS Compliant 4x4 mm SMT Package Non-Reflective Topology Low Insertion Loss: 1.6 dB Single Positive Supply: Vdd = +5V Integrated 3:8 TTL/CMOS Decoder: 0/+3V

4 GHz to 8.5 GHz, GaAs, MMIC, I/Q Mixer Features: Passive: no dc bias required Conversion loss: 8 dB typical Input IP3: 20 dBm (typical) LO to RF isolation: 47 dB (typical) IF frequency range: dc to 3.5 GHz RoHS compliant, 24-terminal, 4 mm × 4 mm LCC package

Wideband MMIC VCO with Buffer Amplifier 3.90 - 7.50 GHz Features: Wide Tuning Bandwidth Pout: +5 dBm Low SSB Phase Noise: −106 dBc/Hz @100 kHzNo External Resonator Needed Single Positive Supply: +5V @ 53 mA Ceramic Leadless SMT Package: 16 mm²

24 GHz to 34 GHz, GaAs, MMIC, Subharmonic SMT Mixer Features:Single positive supply: 5 V at 97 mA Conversion loss: 10 dB typical at 24 GHz to 30 GHz, 10.5 dB typical at 30 GHz to 34 GHz (upconverter) Input IP3: 17.5 dBm typical at 24 GHz to 30 GHz, 20 dBm typical at 30 GHz to 34 GHz (upconverter) 2 LO to RF isolation: 36 dB typical at 30 GHz to 34 GHzWide IF bandwidth: dc to 4 GHz LO drive level: 4 dBm input Subharmonically pumped 2 LO RoHS compliant, 24-terminal, 3.90 mm 3.90 mm, ceramic LCC package

2.4 GHz to 4 GHz, Tunable Low-Pass Filter Features:Amplitude settling time: 200 ns (typical)Wideband rejection: 35 dBSingle-chip replacement for mechanically tuned designsRoHS compliant, 32-lead, 5 mm 5 mm LFCSP package

1.0 GHz to 1.9 GHz Tunable Band-Pass Filter Features: Amplitude settling time: 200 ns 32-lead 5 mm × 5 mm RoHS compliant LFCSP package Single chip replacement for mechanically tuned designs Excellent wideband rejection: ≥30 dB

1.95 GHz to 3.4 GHz, Tunable Band-Pass Filter Features:Amplitude settling time: 200 nsRe-entry rejection (wideband rejection): 30 dBSingle-chip replacement for mechanically tuned designsRoHs compliant, 32-lead, 5 mm x 5 mm LFCSP package

9 GHz to 12 GHz, GaAs, MMIC, I/Q Downconverter Features: Conversion gain: 11 dB (typical) at IFOUT = 100 MHz Image rejection: 25 dB (typical) at IFOUT = 100 MHz LO to RF isolation: 46 dB (typical) LO to IF isolation: 26 dB (typical) IF output frequency: dc to 3.5 GHz 32-lead, 4.9 mm × 4.9 mm ceramic leadless chip carrier