Dual, Low Noise, Single-Supply Variable Gain Amplifier Features:2 independent linear-in-dB channels Input noise at maximum gain: 1.8 nV/Hz, 2.7 pA/Hz Bandwidth: 40 MHz (3 dB) Differential input Absolute gain range programmable 14 dB to +34 dB (FBK shorted to OUT) through Variable gain scaling: 20 dB/V through 40 dB/V Stable gain with temperature and supply variations Single-ended unipolar gain control Output common mode independently set Power shutdown at lower end of gain control Single 5 V supply Low power: 90 mW/channel

AD611 - Operational Amplifier, 1 Func, 950uV Offset-Max, MBCY8

AD6630 - Differential, Low Noise IF Gain Block with Output Clamping

Voltage-output 8-bit digital-to-analog converter, including output amplifier, full microprocessor interface and precision Features: Complete 8-bit DAC Voltage Output-2 Calibrated Ranges Internal Precision Bandgap Reference Single-Supply Operation: +5 V to +15 V Full Microprocessor Interface Fast: 1 µs Voltage settling to ±1/2 LSB Low Power: 75 mW No User Trims Guaranteed Monotonic Over Temperature All Errors Specified Tmin to Tmax Small 16-Pin DIP and 20-PIN PLCC Packages Single Laser-Wafer-Trimmed Chip for Hybrids

12-bit Digital-to-Analog Converters, with Zener Reference Features: Single Chip Construction Very High Speed Settling to 1/2 LSB AD565A: 250 ns max Full-Scale Switching Time: 30 ns Guaranteed for Operation with ±12 V (AD565A) Supplies Low Cost Linearity Guaranteed Over temperature 1/2 LSB max (K, T Grades) Monotonicity Guaranteed Over temperature Low Power = 225mW max Use with On-Board High Stability Reference

Dual, 16-Bit nanoDAC with 5 ppm/C On-Chip Reference, I2C Interface Features: Low power, smallest pin-compatible, dual nanoDACs AD5627R/AD5647R/AD5667R 12-/14-/16-bit On-chip 1.25 V/2.5 V, 5 ppm/°C reference AD5627/AD5667 12-/16-bit External reference only 3 mm × 3 mm LFCSP and 10-lead MSOP 2.7 V to 5.5 V power supply Guaranteed monotonic by design Power-on reset to zero scale Per channel power-down Hardware LDAC and CLR functions I2C-compatible serial interface supports standard (100 kHz), fast (400 kHz), and high speed (3.4 MHz) modes

Octal, 16-Bit nanoDAC+ with 2 ppm/C Reference, SPI Interface Features: High Performance High relative accuracy (INL): ±3 LSB maximum at 16 bits Total unadjusted error (TUE): ±0.14% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.06% of FSR maximum Low drift 2.5 V reference: 2 ppm/°C typical Wide Operating Ranges −40°C to +125°C temperature range 2.7 V to 5.5 V power supply range Easy Implementation User selectable gain of 1 or 2 (GAIN pin/gain bit) 1.8 V logic compatibility 50 MHz SPI with readback or daisy chain 20-lead, RoHS-compliant TSSOP and LFCSP 16-ball, RoHS compliant WLCSP (AD5676R)

Quad, 12-Bit nanoDAC+ with I2C Interface Features: High relative accuracy (INL): ±2 LSB maximum at 16 bits Tiny package: 3 mm × 3 mm, 16-lead LFCSP Total unadjusted error (TUE): ±0.1% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.1% of FSR maximum High drive capability: 20 mA, 0.5 V from supply rails User-selectable gain of 1 or 2 (GAIN pin) Reset to zero scale or midscale (RSTSEL pin) 1.8 V logic compatibility 400 kHz I2C-compatible serial interface 4 I2C addresses available Low glitch: 0.5 nV-sec Low power: 1.8 mW at 3 V 2.7 V to 5.5 V power supply −40°C to +105°C temperature range

Complete 12-Bit A/D Converter Features: Complete 12-Bit A/D Converter with Reference and Clock 8- and 16-Bit Microprocessor Bus Interface Guaranteed Linearity Over Temperature 0°C to +70°C – AD574AJ, K, L –55°C to +125°C – AD574AS, T, U No Missing Codes Over Temperature 35 µs Maximum Conversion Time Buried Zener Reference for Long-Term Stability and Low Gain T.C. 10 ppm/°C max AD574AL 12.5 ppm/°C max AD574AU Ceramic DIP, Plastic DIP or PLCC Package Available in Higher Speed, Pinout-Compatible Versions (15 µs AD674B, 80 µs AD774B; 10 µs (with SHA) AD1674) Available in Versions Compliant with MIL-STD-883 and JAN QPL

Complete 12-Bit A/D Converter Features: Complete 12-Bit A/D Converter with Reference and Clock 8- and 16-Bit Microprocessor Bus Interface Guaranteed Linearity Over Temperature 0°C to +70°C – AD574AJ, K, L –55°C to +125°C – AD574AS, T, U No Missing Codes Over Temperature 35 µs Maximum Conversion Time Buried Zener Reference for Long-Term Stability and Low Gain T.C. 10 ppm/°C max AD574AL 12.5 ppm/°C max AD574AU Ceramic DIP, Plastic DIP or PLCC Package Available in Higher Speed, Pinout-Compatible Versions (15 µs AD674B, 80 µs AD774B; 10 µs (with SHA) AD1674) Available in Versions Compliant with MIL-STD-883 and JAN QPL

Ultralow Power, 1.8 V, 3 mm 3 mm, 2-Channel Capacitance Converter Features:Ultralow powerPower supply voltage: 1.8 V to 3.6 VOperation power supply current: 70 A typicalPower-down current: 2 A typicalFast response timeConversion time: 10 ms per channelWake-up time from serial interface: 300 sAdaptive environmental compensation2 capacitance input channelsSensor capacitance (CSENS): 0 pF up to 13 pFSensitivity up to 3 fF2 modes of operationStandalone with fixed settingsInterfaced to a microcontroller for user-defined settings2 detection output flags2-wire serial interface (I2C-compatible)Operating temperature: 40C to +85C10-lead LFCSP package (3 mm 3 mm 0.8 mm)

Low Cost, Low Power, True RMS-to-DC Converter Features: Converts an ac voltage waveform to a dc voltage and then converts to the true rms, average rectified, or absolute value 200 mV rms full-scale input range (larger inputs with input attenuator) High input impedance: 1012 Ω  Low input bias current: 25 pA maximum High accuracy: ±0.3 mV ± 0.3% of reading RMS conversion with signal crest factors up to 5 Wide power supply range: +2.8 V, −3.2 V to ±16.5 V Low power: 200 μA maximum supply current Buffered voltage output No external trims needed for specified accuracy Related device: the AD737 features a power-down control with standby current of only 25 μA; the dc output voltage is negative and the output impedance is 8 kΩ

AD741 - High Accuracy Operational Amplifier

Ultralow Noise, High Speed, BiFET Op Amp Features: ULTRALOW NOISE PERFORMANCE 2.9 nV/√Hz at 10 kHz 0.38 µV p-p, 0.1 Hz to 10 Hz 6.9 fA/√Hz Current Noise at 1 kHz EXCELLENT AC PERFORMANCE 12.5 V/µs Slew Rate 20 MHz Gain Bandwidth Product THD = 0.0002% @ 1 kHz Internally Compensated for Gains of +5 (or –4) or Greater EXCELLENT DC PERFORMANCE 0.5 mV Max Offset Voltage 250 pA Max Input Bias Current 2000 V/mV Min Open Loop Gain Available in Tape and Reel in Accordance with EIA-481A Standard

Dual Precision, 500 ns Settling, BiFET Op Amp Features: AC PERFORMANCE 500 ns Settling to 0.01% for 10 V Step 75 V/µs Slew Rate 0.0001% Total Harmonic Distortion (THD) 13 MHz Gain Bandwidth Internal Compensation for Gains of +2 or Greater  Single Version: AD744  DC PERFORMANCE 0.5 mV max Offset Voltage (AD746B) 10 µV/°C max Drift (AD746B) 175 V/mV min Open Loop Gain (AD746B) 2 µV p-p Noise, 0.1 Hz to 10 Hz Available in Plastic Mini-DIP, Cerdip and Surface Mount Packages Available in Tape and Reel in Accordance with EIA-481A Standard 

CMOS Low Cost, 10-Bit Multiplying DAC Features: Low cost 10-bit DAC Low cost AD7520 replacement Linearity: ½ LSB, 1 LSB, or 2 LSB Low power dissipation Full 4-quadrant multiplying DAC CMOS/TTL direct interface Latch free (protection Schottky not required) Endpoint linearity

D/A Converter, 1 Func, Parallel, Word Input Loading, 0.8us Settling Time, PQCC28

CMOS,12-Bit, Monolithic Multiplying DAC Features: Improved version of the obsoleted product, AD7541 Full 4 quadrant multiplication 12-bit linearity (endpoint) All parts guaranteed monotonic TTL/CMOS compatible Protection Schottky diodes not required Low logic input leakage

D/A Converter, 1 Func, Parallel, Word Input Loading, 0.6us Settling Time, PQCC20

Multiplying D/A Converters, 12-Bit