GaAs PHEMT MMIC Low Noise AGC Amplifier, 2-20 GHz Features: Gain: 14 dB Noise Figure: 2.5 dB @ 10 GHz P1dB Output Power: +19 dBm @ 10 GHz Supply Voltage: +5V @ 60 mA 50 Ohm Matched Input/Output Die Size: 3.05 x 1.29 x 0.1 mm

Wideband Driver Amplifier Chip, DC - 20 GHz Features: Gain: 17 dB Output Voltage to 10 Vp-p Saturated Output Power: +24 dBm Supply Voltage: +8V @160 mA 50 Ohm Matched Input/Output Die Size: 3.04 x 1.56 x 0.1 mm

0.5 dB LSB GaAs MMIC 6-Bit Digital Positive Control Attenuator, DC - 3.8 GHz Features: 0.5 dB LSB Steps to 31.5 dB  Single control line per bit  TTL/CMOS compatible control  ±0.25 dB typical step error Single +5V supply  24 lead 4x4 mm QFN package: 16 mm2

InGaP HBT Divide-by-2 SMT, DC - 18 GHz Features: Ultra Low SSB Phase Noise: -150 dBc/Hz Very Wide Bandwidth Output Power: -4 dBm Single DC Supply: +5V 3x3 mm QFN SMT Package

InGaP HBT Divide-by-2 SMT, DC - 18 GHz Features: Ultra Low SSB Phase Noise: -150 dBc/Hz Very Wide Bandwidth Output Power: -4 dBm Single DC Supply: +5V 3x3 mm QFN SMT Package

InGaP HBT Divide-by-4 SMT, DC - 18 GHz Features: Ultra Low SSB Phase Noise: -150 dBc/Hz Very Wide Bandwidth Output Power: -4 dBm Single DC Supply: +5V 3x3 mm QFN SMT Package

HBT Vector Modulator SMT, 1.8 - 2.2 GHz Features: Continuous Phase Control: 360°  Continuous Gain: 40 dB Control Output Noise Floor: -162 dBm/Hz Input IP3: +33 dBm 3×3 mm QFN Plastic Package

Low Noise Amplifier SMT, 14 - 27 GHz Features: Noise Figure: 2 dB @ 20 GHz Gain: 19 dB P1dB Output Power: +17 dBm Supply Voltage: +4V @ 90 mA Output IP3: +26 dBm 50 matched Input / Output 24 Lead 4×4mm SMT Package: 16mm2

VCO SMT w/Buffer Amplifier, 6.8 - 7.4 GHz Features: Pout: +11dBm Phase Noise: -106 dBc/Hz @100 kHz No External Resonator Needed Single Supply: +3V @ 80 mA QFN Leadless SMT Package, 16mm2

VCO SMT with Fo/2, 6.65 - 7.65 GHz Features: Dual Output: Fo = 6.65 - 7.65 GHz Fo/2 = 3.325 - 3.825 GHz Phase Noise: -115 dBc/Hz @100 kHz Typ. Pout: +13.5 dBm No External Resonator Needed QFN Leadless SMT Package, 25 mm2

VCO SMT with Fo/2, 7.8 - 8.8 GHz Features: Dual Output: Fo = 7.8 - 8.8 GHz Fo/2 = 3.9 - 4.4 GHz Phase Noise: -115 dBc/Hz @100 kHz Typ. Pout: +13 dBm No External Resonator Needed QFN Leadless SMT Package, 25 mm2

VCO with Fo/2 & Divide-by-4 SMT, 9.6 - 10.8 GHz Features: Triple Output: Fo= 9.6 - 10.8 GHz Fo/2= 4.8 - 5.4 GHz Fo/4= 2.4 - 2.7 GHz Pout: +9 dBm Phase Noise: -110 dBc/Hz @ 100 kHz Typical No External Resonator Needed QFN Leadless SMT Package, 25 mm2

8.5 GHz to 13.5 GHz, GaAs, MMIC, I/Q Mixer Features: Downconverter, 8.5 GHz to 13.5 GHz Conversion loss: 9 dB typical Image rejection: 27.5 dBc typical LO to RF isolation: 39 dB typical Input IP3: 16 dBm typical Wide IF Bandwidth: dc to 3.5 GHz 3.9 mm × 3.9 mm, 24-terminal LCC package: 16 mm²

4 GHz to 8.5 GHz, GaAs, MMIC, I/Q Mixer Features: Passive: no dc bias required Conversion loss: 8 dB typical Input IP3: 20 dBm (typical) LO to RF isolation: 47 dB (typical) IF frequency range: dc to 3.5 GHz RoHS compliant, 24-terminal, 4 mm × 4 mm LCC package

3W SPDT T/R Switch SMT, DC - 6 GHz, Features: Input P0.1dB: +33 dBm @ +5V Insertion Loss: 0.6 dB Positive Control: +3V or +5V Isolation: 27 dB 2x2 mm Leadless DFN SMT Package, 4 mm2

0.25 dB LSB GaAs MMIC 5-BIT Digital Positive Control Attenuator, DC - 4 GHz Features: 0.25 dB LSB steps to 7.75 dB ± 0.05 dB typical step error Low insertion loss: 0.7 dB High IP3: +62 dBm Single control line per bit TTL/CMOS compatible control Single +3V to +5V supply 3x3 mm SMT package

1 dB LSB Silicon MMIC 4-Bit Digital Positive Control Attenuator, 0.1 - 8 GHz Features: 1 dB LSB Steps to 15 dB ±0.2 dB Typical Step Error Low Insertion Loss: 1 dB High IP3: +50 dBm Single Control Line Per Bit TTL/CMOS Compatible Control Single +5V Supply 3x3 mm SMT Package

10 W, Failsafe, GaAs, SPDT Switch 0.2 GHz to 2.7 GHz Features: High input P0.1dB: 40 dBm Tx Low insertion loss: 0.4 dB High input IP3: 67 dBm Positive control: 0 V low control; 3 V to 8 V high control Failsafe operation: Tx is on when no dc power is applied

Dual Output Low Noise Amplifier, 0.04 - 0.96 GHz Features: Single-ended or Balanced Output High Output IP3: +27 dBm Low Noise Figure: 3.5 dB Single Positive Supply: +5V 75 Ohm Input

6 GHz to 14 GHz, GaAs, MMIC,Double-Balanced Mixer Features: Passive: no dc bias required Conversion loss: 10 dB maximum Input IP3 up to 21 dBm typical LO to RF isolation: 37 dB typical Wide IF bandwidth: dc to 5 GHz 7-pad, 0.950 mm × 0.750 mm, RoHS compliant, bare die