Synchronous Step-Down Switching Regulator Controller Features: Wide VIN Range: 4V to 38V Operation RSENSE or DCR Current Sensing ±1% Output Voltage Accuracy Power Good Output Voltage Monitor Phase-Lockable Fixed Frequency: 250kHz to 750kHz Dual N-Channel MOSFET Synchronous Drive Very Low Dropout Operation: 99% Duty Cycle Adjustable Output Voltage Soft-Start or Tracking Output Current Foldback Limiting Output Overvoltage Protection OPTI-LOOP® Compensation Minimizes COUT Selectable Continuous, Pulse-Skipping or Burst Mode® Operation at Light Loads Low Shutdown IQ: 20μA VOUT Range: 0.8V to 5.5V Thermally Enhanced 16-Lead MSOP or 3mm × 3mm QFN Package

500mA High Efficiency, Low Noise, Inductorless Step-Down DC/DC Converters Features: Up to 500mA Output Current No Inductors 2.7V to 5.5V Input Voltage Range 2x Efficiency Improvement Over LDOs 2-Phase, Spread Spectrum Operation for Low Input and Output Noise Shutdown Disconnects Load from VIN Adjustable Output Voltage Range: 0.9V to 1.6V Fixed Output Voltages: 1.2V, 1.5V Super Burst, Burst and Burst Defeat Operating Modes Low Operating Current: IIN = 35µA (Burst Mode® Operation) Super Burst Operating Current: IIN = 10µA Low Shutdown Current: IIN = 0.01µA Typ Soft-Start Limits Inrush Current at Turn-On Short-Circuit and Overtemperature Protected Available in a Thermally Enhanced 10-Pin MSOP Package

1.25A, 4MHz, Synchronous Step-Down DC/DC Converter Features: High Efficiency: Up to 95% VIN Range: 2.5V to 5.5V High Frequency Operation: Up to 4MHz Selectable Low Ripple (Typical 25mVp-p) Burst Mode® Operation: IQ = 40μA Stable with Ceramic Capacitors Uses Tiny Capacitors and Inductor Low RDS(ON) Internal Switches: 0.15Ω Current Mode Operation for Excellent Line and Load Transient Response Short-Circuit Protected Low Dropout Operation: 100% Duty Cycle Low Shutdown Current: IQ ≤ 1μA Output Voltages from 0.6V to 5V Synchronizable to External Clock Supports Pre-Biased Outputs Small 10-Lead (3mm × 3mm) DFN or MSOP Package

Low IQ, 60V Synchronous Step-Down Controller Features: Wide VIN Range: 4V to 60V (65V Abs Max) Low Operating IQ: 50μA Wide Output Voltage Range: 0.8V ≤ VOUT ≤ 24V RSENSE or DCR Current Sensing Phase-Lockable Frequency (75kHz to 750kHz) Programmable Fixed Frequency (50kHz to 900kHz) Selectable Continuous, Pulse-Skipping or Low Ripple Burst Mode® Operation at Light Load Selectable Current Limit Very Low Dropout Operation: 99% Duty Cycle Adjustable Output Voltage Soft-Start or Tracking Power Good Output Voltage Monitor Output Overvoltage Protection Low Shutdown IQ: < 14μA Internal LDO Powers Gate Drive from VIN or EXTVCC No Current Foldback During Start-Up Small 20-Pin 3mm × 4mm QFN and TSSOP Packages

LTC6991 - TimerBlox: Resettable, Low Frequency Oscillator

8-Channel JFET Analog Multiplexers (Overvoltage & Power Supply Loss Protected) Features: JFET Switches Rather than CMOS Low 'ON' Resistance: 220Ω Highly Resistant to Static Discharge Damage NO SCR Latch-Up Problems 125°C Temperature Tested Dice Available MUX-08 Pin Compatible with DG508, HI-508A, IH5108, IH6108, LF11508, 12508, 13508, AD7506 See datasheet for additional features

IC A/D CONVERTER SINGLE 16-BIT HYBRID SOP 28PIN

MicroConverter, Dual-Channel 16-Bit ADCs with Embedded Flash MCU Features: High-Resolution Sigma-Delta ADCs Dual 16-Bit Independent ADCs Programmable Gain Front End 16-Bit No Missing Codes, Primary ADC 13-Bit p-p Resolution @ 20 Hz, 20 mV Range 16-Bit p-p Resolution @ 20 Hz, 2.56 V Range Memory 8 Kbytes On-Chip Flash/EE Program Memory 640 Bytes On-Chip Flash/EE Data Memory Flash/EE, 100 Year Retention, 100 Kcycles Endurance 256 Bytes On-Chip Data RAM 8051-Based Core 8051-Compatible Instruction Set (12.58 MHz Max) 32 kHz External Crystal, On-Chip Programmable PLL Three 16-Bit Timer/Counters 26 Programmable I/O Lines 11 Interrupt Sources, Two Priority Levels Power Specified for 3 V and 5 V Operation Normal: 3 mA @ 3 V (Core CLK = 1.5 MHz) Power-Down: 20 μA (32 kHz Crystal Running) On-Chip Peripherals On-Chip Temperature Sensor 12-Bit Voltage Output DAC Dual Excitation Current Sources Reference Detect Circuit Time Interval Counter (TIC) UART Serial I/O I2C®-Compatible and SPI® Serial I/O Watchdog Timer (WDT), Power Supply Monitor (PSM)

Dual-Channel Digital Isolator, Enhanced System-Level ESD Reliability Features: Enhanced system-level ESD performance per IEC 61000-4-x  High temperature operation: 125°C Default low output Narrow body, RoHS-compliant, 8-lead SOIC Low power operation  5 V operation (refer to data sheet) 3.3 V operation (refer to data sheet) High data rate: dc to 25 Mbps (NRZ) See data sheet for additional featuresADuM3210-EP supports defense and aerospace applications (AQEC standard) Download ADuM3210-EP Data Sheet (pdf) Military temperature range: −55°C to +125°C Controlled manufacturing baseline Enhanced product change notification Qualification data available on request Qualified for automotive applications V62/14627 DSCC Drawing Number

Isolated Switching Regulators (0/4 Channel Directionality) Features: Isolated PWM Controller Integrated transformer driver Regulated adjustable output: 3.3 V to 24 V 2 W output power 70% efficiency at guaranteed load of 400 mA at 5.0 V output Quad dc-to-25 Mbps (NRZ) signal isolation channels 20-lead SSOP package High temperature operation: 105°C High common-mode transient immunity: >25 kV/μs 200 kHz to 1 MHz adjustable oscillator frequency Soft start function at power-up Pulse-by-pulse overcurrent protection Thermal shutdown 2500 V rms isolation Evaluation Board available Automotive Qualified

Quad-Channel Isolators with Integrated DC/DC Converter (1/3 channel directionality) Features: isoPower integrated, isolated DC/DC converter Regulated 3.3 V or 5 V output Up to 400 mW output power Quad dc-to-25 Mbps (NRZ) signal isolation channels Schmitt trigger inputs 16-lead SOIC package with 7.6 mm creepage High temperature operation: 105°C High common-mode transient immunity: >25 kV/μs See data sheet for additional features

ADV476 - CMOS Monolithic 256 X 18 Color PALETTE RAM-DAC

16 Bit Digital to Analog Converter 4 64-QFN (9x9)

Digital Potentiometer ICs 128tap, Quad DigiPOT, NVM, SPI

ADV601 - UltraVideo Codec

Audio Dual Matched NPN Transistor Features: Very low voltage noise: 1nV/√Hz max @ 100Hz Excellent current gain match: 0.5% Low offset voltage (VOS): 200 μV maximum (SOIC) Outstanding offset voltage drift: 0.03 μV/°C High gain bandwidth product: 200 MHz

8-Bit, 2S, Sampling A/D Converter Features: Fast Conversion Time: 1.36 µs max Built-In Track-and-Hold Function No Missed Codes No User Trims Required Single +5V Supply Ratiometric Operation No External Clock Extended Temperature Range Operation Skinny 20-Pin DIP, SOIC and 20-Terminal Surface Mount Packages

3 V/5 V, 2 MSPS, 8-Bit, 1-/4-/8-Channel Sampling ADCs Features: 8-bit half-flash ADC with 420 ns conversion time 1, 4 and 8 Single-Ended Analog Input Channels Available with Input Offset Adjust On-Chip Track-and-Hold SNR Performance Given for Input Frequencies Up to 10 MHz Automatic Power-Down at the End of Conversion On-Chip Reference (2.5 V) Wide Operating Supply Range 3 V ± 10% and 5 V ± 10% Input Ranges: 0 V to 2 Vp-p, VDD = 3 V ± 10% 0 V to 2.5 Vp-p, VDD = 5 V ± 10% Flexible Parallel Interface with EOC Pulse to Allow Stand-Alone Operation

Switching Voltage Regulators 725VDC Isolated DC/DC uModule Converter

3 V/5 V, 2 MSPS, 8-Bit, 1-/4-/8-Channel Sampling ADCs Features: 8-bit half-flash ADC with 420 ns conversion time 1, 4 and 8 Single-Ended Analog Input Channels Available with Input Offset Adjust On-Chip Track-and-Hold SNR Performance Given for Input Frequencies Up to 10 MHz Automatic Power-Down at the End of Conversion On-Chip Reference (2.5 V) Wide Operating Supply Range 3 V ± 10% and 5 V ± 10% Input Ranges: 0 V to 2 Vp-p, VDD = 3 V ± 10% 0 V to 2.5 Vp-p, VDD = 5 V ± 10% Flexible Parallel Interface with EOC Pulse to Allow Stand-Alone Operation