RS232 TXRX 460KBPS 3.6V LFCSP-32; Device Type:RS232 Transceiver; IC Interface Type:RS232; No. of Drivers:3Drivers; No. of Receivers:3Receivers; Supply Voltage Min:2.7V; Supply Voltage Max:3.6V; Driver Case Style:LFCSP; No. of Pins:32Pins; Operating Temperature Min:-40°C; Operating Temperature Max:85°C; Packaging:Each; Product Range:ADM3315E Series; Automotive Qualification Standard:-; MSL:MSL 3 - 168 hours; IC Generic Number:ADM3315E; SVHC:No SVHC (20-Jun-2016)

anyCAP 100 mA Low Dropout Linear Regulator Features:1.2% accuracy over line and load regulations @ 25C Ultralow dropout voltage: 120 mV typical @ 100 mA Requires only COUT = 0.47 F for stability anyCAP LDOs are stable with all types of capacitors (including MLCC) Current and thermal limiting Low noise Low shutdown current: 1 A 2.8 V to 12 V supply range 20C to +85C ambient temperature range Several fixed voltage options Ultrasmall 5-lead SOT-23 package Excellent line and load regulations

High Accuracy Ultralow IQ, 300 mA, anyCAP Low Dropout Regulator Features:High Accuracy over line and load: 0.8% @ 25C, 1.8% over temperatureUltralow dropout voltage: 230 mV (Max) @ 300 mARequires only COUT = 1.0 F for stabilityanyCAP is stable with any type of capacitor (including MLCC)Current and thermal limitingLow noiseLow shutdown current: 2.6 V to 12 V supply range40C to +85C ambient temperature rangeUltrasmall 8-Lead MSOP package

High Accuracy Ultralow Quiescent Current, 500 mA, anyCAP Low Dropout Features: High accuracy over line and load: ±0.9% @ 25°C, ±1.8% over temperature Ultralow dropout voltage: 200 mV (typ) @ 500 mA Requires only CO = 1.0 µF for stability anyCAP® = stable with any type of capacitor (Including MLCC) Current and thermal limiting Low noise Low shutdown current: < 10 nA (typ) 2.6 V to 12 V supply range –40°C to +85°C ambient temperature range

Dual 3 MHz, 1200mA Buck Regulator with Two 300 mA LDOs Features: Main input voltage range: 2.3 V to 5.5 V Two 1200 mA buck regulators and two 300 mA LDOs 24-lead, 4 mm × 4 mm LFCSP or 28-lead TSSOP package Regulator accuracy: ±1.8% Factory programmable or external adjustable VOUTx 3 MHz buck operation with forced PWM and auto PWM/PSM modes BUCK1/BUCK2: output voltage range from 0.8 V to 3.8 V LDO1/LDO2: output voltage range from 0.8 V to 5.2 V LDO1/LDO2: input supply voltage from 1.7 V to 5.5 V LDO1/LDO2: high PSRR and low output noise

Keypad Decoder and I/O Port Expander Features: 16-element FIFO for event recording 10 configurable I/Os allowing for such functions as:  Keypad decoding for a matrix of up to 5 × 5  Key press/release interrupts  See datasheet for additional features I2C interface with Fast-mode plus (Fm+) support of up to 1 MHz Open-drain interrupt output 16-ball WLCSP, 1.59 mm × 1.59 mm

28 V, 200 mA, Low Noise, Linear Regulator Features: Low noise: 18 μV rms Power supply rejection ratio (PSRR): 66 dB at 10 kHz at VOUT = −3 V Positive or negative enable logic Stable with small 2.2 μF ceramic output capacitor Input voltage range: −2.7 V to −28 V Maximum output current: −200 mA Low dropout voltage: −185 mV at −200 mA load Initial accuracy: ±1% Accuracy over line, load, and temperature +2% maximum/−3% minimum Low quiescent current, IGND = −650 μA with −200 mA load Low shutdown current: −2 μA Adjustable output from −1.22 V to −VIN + VDO Current-limit and thermal overload protection 6- and 8-lead LFCSP and 5-lead TSOT Supported by ADIsimPower tool

Ultracompact, Precision 10.0 V Voltage Reference Features: Ultracompact SC70 and TSOT packages Low temperature coefficient 8-lead SOIC: 3 ppm/°C typical 5-lead SC70: 9 ppm/°C maximum 5-lead TSOT: 9 ppm/°C maximum Initial accuracy ±0.1% No external capacitor required Low noise 10 μV p-p, 0.1 Hz to 10.0 Hz (ADR02) Wide operating range ADR01: 12.0 V to 36.0 V ADR02: 7.0 V to 36.0 V ADR03: 4.5 V to 36.0 V ADR06: 5.0 V to 36.0 V High output current 10 mA Wide temperature range: –40°C to +125°C ADR01/ADR02/ADR03 pin compatible to industry-standard REF01/REF02/REF03 ADR01, ADR02, ADR03 and ADR06 SOIC (A grade) qualified for automotive applicationsADR01-EP supports defense and aerospace applications (AQEC standard) Download ADR01-EP data sheet (pdf) Military temperate range (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/12658 DSCC Drawing Number

Ultracompact, Precision 3.0 V Voltage Reference Features: Ultracompact SC70 and TSOT packages Low temperature coefficient 8-lead SOIC: 3 ppm/°C typical 5-lead SC70: 9 ppm/°C maximum 5-lead TSOT: 9 ppm/°C maximum Initial accuracy ±0.1% No external capacitor required Low noise 10 μV p-p, 0.1 Hz to 10.0 Hz (ADR02) Wide operating range ADR01: 12.0 V to 36.0 V ADR02: 7.0 V to 36.0 V ADR03: 4.5 V to 36.0 V ADR06: 5.0 V to 36.0 V High output current 10 mA Wide temperature range: –40°C to +125°C ADR01/ADR02/ADR03 pin compatible to industry-standard REF01/REF02/REF03 ADR01, ADR02, ADR03 and ADR06 SOIC (A grade) qualified for automotive applications

LDO Voltage Regulators 1.5A, Low Noise, Negative Linear Regulator with Precision Current Limit

ADSP-ESP101 - 66MHz,16-Bit,2.5V,TJG Adaptive HF Code

Precision Analog Microcontroller, 12-Bit Analog I/O, ARM7TDMI MCU Features: Analog I/O Multichannel, 12-bit, 1 MSPS ADC Up to 16 ADC channels Fully differential and single-ended modes 0 V to VREF analog input range 12-bit voltage output DACs Up to 4 DAC outputs available On-chip voltage reference On-chip temperature sensor (±3°C) Voltage comparator Microcontroller ARM7TDMI core, 16-bit/32-bit RISC architecture JTAG port supports code download and debug Clocking options Trimmed on-chip oscillator (±3%) External watch crystal External clock source up to 44 MHz 41.78 MHz PLL with programmable divider See datasheet for additional features

Precision Analog Microcontroller, 12-Bit Analog I/O, ARM7TDMI MCU Features: Analog input/output Multiple channel, 12-bit, 1 MSPS ADC 2 differential pairs with input PGA General-purpose inputs (differential or single-ended) ADuC7121: 7 channels Fully differential and single-ended modes 0 V to VREF analog input voltage range (single-ended mode) 5 low noise IDACs 250 mA, 200 mA, 45 mA, 80 mA, 20 mA 12-bit voltage output DACs ADuC7121: 4 channels 4× 12-bit voltage output DACs On-chip voltage reference On-chip temperature sensor Microcontroller ARM7TDMI core, 16-bit/32-bit RISC architecture JTAG port supports code download and debug Clocking options Trimmed on-chip oscillator (±3%) External watch crystal External clock source up to 41.78 MHz 41.78 MHz PLL with programmable divider Memory 126 kB Flash/EE memory, 8 kB SRAM In-circuit download, JTAG-based debug Software triggered in-circuit reprogrammability On-chip peripherals UART, 2 × I2C and SPI serial I/O 32-pin GPIO port 4× general-purpose timers Wake-up timers and WDT Power supply monitor IDAC monitor Temperature monitor Vectored interrupt controller for FIQ and IRQ 8 priority levels for each interrupt type Interrupt on edge or level external pin inputs Power Specified for 3 V operation Normal mode: 11 mA at 5.22 MHz, 30 mA at 41.78 MHz Packages and temperature range 7 mm × 7 mm 108-ball CSP_BGA Fully specified for –40°C to +105°C operation Tools Low cost QuickStart development system Full third party support

MicroConverter, 12-Bit ADCs and DACs with Embedded 62 kBytes Flash MCU Features: ANALOG I/O 8-channel, 247 kSPS 12-bit ADC DC performance: ±1 LSB INL AC performance: 71 dB SNR DMA controller for high speed ADC-to-RAM capture 2 12-Bit (monotonic) voltage output DACs Dual output PWM/Σ-Δ DACs On-chip temperature sensor function ±3C On-chip voltage reference Memory 62 kBytes on-chip Flash/EE program memory 4 kBytes on-chip Flash/EE data memory Flash/EE, 100 yr retention, 100 kCycles endurance 2304 bytes on-chip data RAM 8051 based core 8051 compatible instruction set (16 MHz max) 12 interrupt sources, 2 priority levels Dual data pointer Extended 11-bit stack pointer See data sheet for additional features

Robust, Triple Ch. Isolator W/ Input Disable & 0 Reverse Channels Features: High common-mode transient immunity: 100 kV/µs High robustness to radiated and conducted noise Low propagation delay 13 ns maximum for 5 V operation 15 ns maximum for 1.8 V operation 150 Mbps maximum guaranteed data rate Backward compatibility ADuM130E1/ADuM131E1 pin compatible with ADuM1300/ADUM1301 Low dynamic power consumption 1.8 V to 5 V level translation High temperature operation: 125°C Fail-safe high or low options 16-lead, RoHS compliant, SOIC package See data sheet for additional information

Quad-Channel Digital Isolator (2/2 Channel Directionality) Features: Qualified for automotive applications Bidirectional communication 3 V/5 V level translation High temperature operation: 125°C Precise timing characteristics High common-mode transient immunity: >25 kV/μs High data rate: dc to 90 Mbps (NRZ) See data sheet for additional features

Quad-Channel Digital Isolator Features: Bidirectional communication 3 V/5 V level translation High temperature operation: 105°C Up to 10 Mbps data rate (NRZ)Low Power Operation 5 V operation 1.3 mA per channel maximum at 0 Mbps to 2 Mbps 4.0 mA per channel maximum at 10 Mbps 3 V operation 0.8 mA per channel maximum at 0 Mbps to 2 Mbps 1.8 mA per channel maximum at 10 Mbps Programmable default output state High common-mode transient immunity: >25 kV/µs 16-lead, RoHS-compliant, SOIC wide body packageSafety and Regulatory Approvals UL recognition: 3750 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A VDE certificate of conformity DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12 VIORM = 560 V peak

5 kV RMS Dual Channel Digital Isolators (Default Low, 2/0 Channel Directionality) Features: High isolation voltage: 5000 V rms Up to 100 Mbps data rate Low propagation delay: 24 ns maximum Low dynamic power consumption Bidirectional communication 3 V to 5 V level translation High temperature operation: 125°C High common-mode transient immunity: >25 kV/μs Default high output: ADuM2280/ADuM2281 Default low output: ADuM2285/ADuM2286 16-lead SOIC wide body enhanced creepage package Safety and regulatory approvals (pending) UL recognition: 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice #5A IEC 60601-1: 250 V rms (reinforced) IEC 60950-1: 400 V rms (reinforced) VDE Certificate of Conformity DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12 VIORM = 846 V peak Pin-compatible with ADuM220x and ADuM221x families

Dual-Channel Digital Isolator, Enhanced System-Level ESD Reliability Features: Enhanced system-level ESD performance per IEC 61000-4-x  High temperature operation: 125°C Default low output Narrow body, RoHS-compliant, 8-lead SOIC Low power operation  5 V operation (refer to data sheet) 3.3 V operation (refer to data sheet) High data rate: dc to 25 Mbps (NRZ) See data sheet for additional featuresADuM3210-EP supports defense and aerospace applications (AQEC standard) Download ADuM3210-EP Data Sheet (pdf) Military temperature range: −55°C to +125°C Controlled manufacturing baseline Enhanced product change notification Qualification data available on request Qualified for automotive applications V62/14627 DSCC Drawing Number

Quad-Channel, Digital Isolator, Enhanced System-Level ESD Reliability Features: For AEC-Q100 Automotive Qualified Devices Specifications view ADuM340xW data sheet Enhanced system-level ESD performance per IEC 61000-4-x Bidirectional communication 3 V/5 V level translation High temperature operation: 105°C High data rate: dc to 90 Mbps (NRZ) See data sheet for additional featuresADuM3401-EP supports defense and aerospace applications (AQEC standard) Download ADuM3401-EP data sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/14630 DSCC Drawing Number