LTC4267CDHC | PoE Powered Device with 12V Isolated Auxiliary, VOUT = 12V @ 0.9A
Analog Devices Inc.Demonstration circuit 1145B, featuring the LTC4267, provides a complete IEEE 802.3af Powered Device (PD) interface and isolated 12V at 0.9A power supply solution for use in Power over Ethernet (PoE) applications. An optional connection is included for a 12V auxiliary supply on the secondary side that disables PoE when present.
DC1147A-D
Analog Devices Inc.The LTC6406 is a very low noise, low distortion, fully differential input/output amplifier optimized for 3V, single supply operation. The LTC6406 input common mode range is rail-to-rail, while the output common mode voltage is independently adjustable by applying a voltage on the VOCM pin. This makes the LTC6406 ideal for level shifting signals with a wide common mode range for driving 12-bit to 16-bit single supply, differential input ADCs. A 3GHz gain-bandwidth product results in 70dB linearity for 50MHz input signals. The LTC6406 is unity gain stable and the closed-loop bandwidth extends from DC to 800MHz. The output voltage swing extends from near-ground to 2V, to be compatible with a wide range of ADC converter input requirements. The LTC6406 draws only 18mA, and has a hardware shutdown feature which reduces current consumption to 300?A. The LTC6406 is available in a compact 3mm x 3mm 16-pin leadless QFN package as well as an 8-lead MSOP package, and operates over a ?40?C to 85?C temperature range. Applications Differential Input ADC Driver Single-Ended to Differential Conversion Level-Shifting Ground-Referenced Signals Level-Shifting VCC-Referenced Signals High-Linearity Direct Conversion Receivers
LT3680EMSE Demo Board | 6.3V ≤ VIN ≤ 36V, VOUT = 5V @ 3.5A
Analog Devices Inc.Demonstration circuit 1149 is a monolithic step-down DC/DC switching regulator featuring LT3680. The LT3680 can be synchronized over a 250 kHz to 2 MHz range. The demo board is designed for 5V/3.5A output from a 6.3V to 36V input.
LT3009EDC Demo Board | Micropower Low Dropout Linear Regulator, 1.6V ≤ VIN ≤ 20V, VOUT = 1.2V/1.5V/1.8V/2.0V/2.5V/3.3V/5V/Adjustable @ 20mA
Analog Devices Inc.Demonstration circuit 1156A is an ultralow quiescent current and low dropout voltage linear regulator featuring the 20mA output current LT3009 in the which comes in the 2mm × 2mm DFN package. The DC1156A has an input voltage range from 1.6V to 20V and has jumper-selectable output voltages of 1.2V, 1.5V, 1.8V, 2.0V, 2.5V, 3.3V, 5V or a user-defined value.
With the 3µA quiescent current of the LT3009, the DC1156A is ideal for supplying power to low current battery-powered systems, keep-alive power supply and remote monitoring utility meters and hotel door locks.
LTC4558EDU | Dual SIM Smart Card Power Supply and Interface
Analog Devices Inc.DC1263A: Demo Board for the LTC4558 Dual SIM/Smart Card Power Supply and Interface
KSZ8081RNB-EVAL
Microchip Technology Inc.Ethernet Development Tools 10/100 PHY, 0.11u - Evaluation Board
TSDMRX-19V-20W-EVM
Semtech CorporationPower Management IC Development Tools WP DUAL MODE RX UP TO 20W, 19V
TSDMRX-19V-20W-EVM
Semtech CorporationPower Management IC Development Tools WP DUAL MODE RX UP TO 20W, 19V
KSZ8091RNA-EVAL
Microchip Technology Inc.Ethernet Development Tools Eval - 10/100 PHY w/EEE & WOL, 0.11u
TSDMRX-19V-20W-EVM
Semtech CorporationPower Management IC Development Tools WP DUAL MODE RX UP TO 20W, 19V
KSZ8999-EVAL
Microchip Technology Inc.Ethernet Development Tools KSZ899 Eval, No Power Supply Incl.
IRS21956SPBF
International Rectifier (IR)MOSFET & Gate Driver IC, High & Low (Dual mode) Sides, 20-Pin SOIC WB, Tube
KSZ9031RNX-EVAL
Microchip Technology Inc.Ethernet Development Tools 1-Port Gigabit Ethernet PHY - Evaluation Board
KSZ8851SNL-EVAL
Microchip Technology Inc.Ethernet Development Tools Single Ethernet Port + SPI Bus Interface Eval Board
KSZ9031MNX-EVAL
Microchip Technology Inc.Ethernet Development Tools 1-Port Gigabit Ethernet PHY - Evaluation Board
KSZ9031MNX-EVAL
Microchip Technology Inc.Ethernet Development Tools 1-Port Gigabit Ethernet PHY - Evaluation Board
