Evaluation Module for TPS62621 600-mA; 6-MHz; Vout 1.8V Step-Down Converter

ADS7845EVM Evaluation Module

Infrared (IR) BoosterPack Plug-in Module

ADS1147 Evaluation Module

TAS2555 5.7W Class-D Audio Amplifier Evaluation Module

36 Volt Simple Switcher® Module 8A Current Sharing Evaluation Board

DAP Signal Conditioning Board (Bipolar)

3A, Host-Controlled Single-Input, Single Cell Switchmode Li-Ion Battery Charger Evaluation Module

DEM-OPA68xP: Demonstration Fixture

Evaluation Module for TPS61183 IC

THS4121EVM Evaluation Module

AFE5801 evaluation module

The TAS2521 is a low power digital input speaker amp with support for 24-bit digital I2S data mono playback. In addition to driving a speaker amp up to 4-Ω, the device also features a mono headphone driver and a fully programmable miniDSP for signal processing. The digital audio data format is programmable to work with popular audio standard protocols (I2S, left/right-justified) in master, slave, DSP and TDM modes. The fully programmable miniDSP can support several functions such equalization for audio, multi-band DRC, tone generation and several other user defined functions. An on-chip PLL provides the high-speed clock needed by the digital signal-processing block. The volume level can be controlled by register control. The audio functions are controlled using the I2C™ serial bus or SPI bus. The device includes an on-board LDO that runs off the speaker power supply to handle all internal device analog and digital power needs. The included POR as power-on-reset circuit reliably resets the device into its default state so no external reset is required at normal usage; however, the device does have a reset pin for more complex system initialization needs. The device also includes two analog inputs for mixing and muxing in both speaker and headphone analog paths. Features:   Digital input mono speaker amp Instruction-Programmable Embedded miniDSP Supports 8-kHz to 192-kHz Sample Rates Mono Class-D BTL Speaker Driver (2.6 W Into 4 Ω or 1.7 W Into 8 Ω) Mono Headphone/Lineout Driver Two Single-Ended Inputs With Output Mixing and Level Control Embedded Power-on-Reset Integrated LDO Built-in Digital Audio Processing Blocks With User-Programmable Biquad Filters Integrated PLL Used for Programmable Digital Audio Processor I2S, Left-Justified, Right-Justified, DSP, and TDM Audio Interfaces I2C and SPI control with auto-increment Full Power-Down Control Power Supplies: Analog: 1.5 V–1.95 V Digital Core: 1.65 V–1.95 V Digital I/O: 1.1 V–3.6 V Class-D: 2.7 V–5.5 V (SPKVDD ≥ AVDD) 4mm × 4mm 24-Pin QFN Package

Secondary Side Post Regulator Synchronous Buck Controller

BQ24018 (bqTINY) Evaluation Module

BUF08630 Evaluation Module

125-MHz quad M-LVDS transceiver evaluation board

LM3549 Evaluation Module

TMS370 Compact Development Tool (CDT)

CDCE62005EVM Evaluation Module