Manufacturer

Displaying 1 - 3 of 3

Parts from Team BlackSheep

TBS VENDETTA

Part Number : TBS VENDETTA

Team BlackSheep
Full carbon fiber monocoque, quick swap arms, solder-free repairs, ready to fly as 240 size fpv racer, for 5" props. But it doesn't stop there! Sporting the brand new TBS Triumph Antenna in combination with the TBS CORE Pro OSD and TBS Unify Pro VTX, the TBS Vendetta allows you to configure every parameter of your FPV racer via R/C stick commands! Each drone comes tuned and test-flown by our professional tuning expert, Magnus. Install a receiver, strap on a 4S battery and the TBS VENDETTA will tear a hole into the sky, and you're coming along for the ride! Carbon fiber all the way All structural parts on the TBS VENDETTA are made out of custom-made carbon fiber layup. The arms are made from flat 3.5mm thick carbon fiber plates, machined to precise standards on a 4-axis CNC machine, fully chamfered to prevent delamination. The body is a pure work of art, which starts its life as a hand molded tubular 2mm carbon fiber master. It is trimmed down by a 4-axis CNC machine to save weight. Smooth and rounded edges in the CNC cuts are our way of showing off. The matte finish is sand blasted, because attention to detail requires it. Tight integration, modular design The entire FPV racer is built around the idea of countless self-contained parts working together hand in hand for a unified user experience. Starting from the TBS ZeroZero FPV camera, to the TBS POWERCUBE and TBS CORE PRO, everything is repairable without a soldering iron, and with just two tools. This does not prevent you from configuring all tuning parameters via the built-in OSD, to changing VTx channels or power levels. From box to air: 5 minutes The TBS VENDETTA comes pre-tuned, and the R/C Calibration Wizard takes you through the setup steps. Just strap in a R/C receiver, tune your goggles to BOSCAM A CH1, and start setting up your controls (both R/C receiver, goggles and FPV video receivers are sold separately). The arms arrive in detached state to allow quick access to the R/C receiver bay the first time. Built to grow From the structural rigidity to the over-powered ESCs, everything has been developed with your progress as a pilot in mind. A step to 6S with bigger motors to gain ridiculous power-to-weight ratios, custom arms for higher efficiency motors and props, or simply a different motor setup to suit your tastes are easily possible, thanks to the MT30 connectors and the quick swap arms. You can even carry different pairs of arms with unique motor and props combos installed for every occasion, and mount what you fancy! Features: 240-sized RTF FPV Racer Quick-replace 3.5mm carbon fiber arms, MT30 connectors Cobra CM2204/2300kV Motors, HQ 5x4x3 Props TBS PowerCube with fastest F3 board available, 2-6S capable Bulletproof 30/50A ESCs Compatible with PPM, SBUS, XBUS, Spektrum R/C systems Fully configurable via OSD, no PC required GoPro 3/4 and Mobius / Runcam mount included, both 10 and 30 degree variations Lost model alarm 410g weight without Battery or HD camera

TBS GEMINI

Part Number : TBS GEMINI

Team BlackSheep
A revolution in mini quadcopter design. Small, yet fast and locked in. Integrated, but modular and crash resistant. Built by FPV enthusiasts, for FPV enthusiasts

TBS DISCOVERY PRO

Part Number : TBS DISCOVERY PRO

Team BlackSheep
The TBS DISCOVERY PRO gimbal frame is the perfect frame for amateur and pro aerial videographers. Sporting a fully stabilized camera Gimbal with extremely compact dimensions it is the most powerful, robust and versatile "take anywhere" quadrocopter available to date. Incredible Flight Time We've been working hard on improving the flight time of the TBS DISCOVERY (PRO) lineup. While a lot of people love our DISCOVERYs for their super-steady handling and insane speed envelope, it was hard to get the flight time near or beyond the 20 minute mark. With the  6S 4000mAh battery flight times of 25mins (T-Motor Props 15x5) or 23mins (RCTimer 15x6.5) are possible with a fully-equipped TBS DISCOVERY PRO. The regular DISCO will fly even longer. With a 2nd or even a 3rd battery (yes, the motors handle that with ease) you can fly 37 or 45mins respectively. The sky is the limit.  Long-Range Capable Team BlackSheep are the undisputed kings of long range FPV. With the DISCOVERY PRO you can make camera shots that rival those of real helicopters. You can chase BMX drivers down an entire slope. You can film boats and yachts ... from the shore. You can shoot breathtaking action scenes from the director's seat! Since you're piloting from the camera view, your skill is the limit. To fly further, we offer the EzUHF Tx & Rx long range control system and the Lawmate 2.4GHz long range video system. Compatible with all remote controls! With the 11dBi Yagi ranges of 10km or more are easily achieved. The battery life now is your limit. Built-in Stabilized Gimbal Setting up a gimbal the right way can be a daunting task. Installing a brushless gimbal board and making the wiring work in your favor is difficult. Therefore we decided to license the SimpleBGC firmware and the SimpleBGC hardware layout from Viacopter. This is a world's first ... the gimbal controller fully embedded into the frame. No soldering, no software configuration, plug in the motors and you're good to go. The embedded USB port connects to your PC for future firmware upgrades and custom configs.  Integrated TBS Core The CORE has won over the FPV enthusiasts world wide and as the easiest to use OSD module. Clean data layout and only the most important information presented on screen. Clutter-free, permanently visible, zero wires for installation, and nicely tucked away under a tin shield. The most robust and secure solution for on screen telemetry. The TBS CORE is famous for: Accurate flight pack voltage and mAh consumption display Reliable power supply for FPV camera and transmitter Flight time shown once a minute Display RSSI (R/C signal strength) from all major UHF systems and some regular R/C systems Single battery FPV system - less chance of failure!

Displaying 1 - 3 of 3

Latest Parts

IN STOCK 988
Buy

ASX00049

Arduino

$44.78 - * $58.34

IN STOCK 2249
Buy

AD96685BRZ

Analog Devices Inc.

$1.72 - * $11.75

IN STOCK 5432
Buy

Reference Designs

RD006

Wurth Elektronik

RD006 - 3 W Dual-output isolated auxiliary supply for communication interfaces and measurement systems

CN0583

Analog Devices Inc.

Multistandard Micropower Verified Smoke Detection System-on-Module

Technical Resources

EVALUATION KITS

EVAL-AD7124-8SDZ

Analog Devices Inc.

$55.31 - * $75.69

IN STOCK 855
Buy
View All