Gas Discharge Tube 600 V 20000A (20kA) ±20% 2 Pole Through Hole

0.75 µF ±20% 900V Ceramic Capacitor Stacked SMD, 6 J-Lead

56 V 500 A Varistor 1 Circuit Surface Mount, MLCV 1812 (4532 Metric)

1.5 µF Film Capacitor 250V 630V Polypropylene (PP), Metallized Radial

470 µF 35 V Aluminum Electrolytic Capacitors Radial, Can 50mOhm @ 10kHz 7000 Hrs @ 105°C

6800 pF Film Capacitor 400V 630V Polypropylene (PP), Metallized Radial

0.1 µF Film Capacitor 63V 100V Polyester, Polyethylene Terephthalate (PET), Metallized - Stacked Radial

10 nH Unshielded Drum Core, Wirewound Inductor 600 mA 200mOhm Max 0603 (1608 Metric)

4700 pF Film Capacitor 40V 63V Polyester, Polyethylene Terephthalate (PET), Metallized - Stacked Radial

VARISTOR, MOV, 200VDC, MODULE;

VARISTOR, MOV, 420VDC, MODULE;

ICL NTC THERMISTOR, 3OHM, 39MM DISC;

ICL S30 R25=10 IMAX=15A MAX ENEG The TDK Corporation S series inrush current limiters (ICLs) comprise the S30 and S36 families of NTC thermistors. With maximum steady-state currents of up to 35 A and energy absorption capabilities of up to 750 J, the components are optimized for high-power applications that demand reliable suppression of inrush currents. Typical applications include switch-mode power supplies, frequency converters, photovoltaic inverters, uninterruptible power supplies, and soft-start motors. The S30 series features disk diameters of 30 mm, 7.5 mm lead spacing, and maximum power handling of 19 W, while the larger S36 series (disk diameters 36 mm; lead spacing 19 mm) extends this capability to 25 W. Both variants are rated for a wide climatic category of 55/170/21 (IEC 60068-1). Depending on type, the components cover resistance values from 2 Ω to 20 Ω, permissible capacitances up to 13,050 µF at 240 VAC, and continuous current ratings from 10 A to 35 A. By offering stable performance with low power loss during continuous operation, the new S30 and S36 series enable designers to improve system efficiency to meet higher energy consumption standards. Users will benefit from a lower electricity bill over a conventional solution using fixed power resistors together with relays. TDK offers a web-based NTC ICL selection tool that gives users recommendations for a suitable NTC ICL for their applications. Features and Benefits: Leaded and coated NTC thermistors Tinned copper wire Coating material flame retardant to UL 94 V-0 Highly stable electrical characteristics   Applications: Inrush current limiting Switch-mode power supplies Frequency converters Photovoltaic inverters Uninterruptible power supplies Soft-start motors  

Gas Discharge Tube 4000 V 3000A (3kA) ±20% 2 Pole Through Hole

4.7 mF 350 V Aluminum Electrolytic Capacitors Radial, Can - Screw Terminals 20mOhm @ 100Hz 6000 Hrs @ 105°C

33 µF 450 V Aluminum Electrolytic Capacitors Radial, Can 7.6Ohm @ 120Hz 3000 Hrs @ 105°C

NTC Thermistor 10k Ring Lug

NTC Thermistor 10k 0603 (1608 Metric)