Ultralow Power, Adaptive Linear Power, Dual-Port ADSL/ADSL2+ Line Driver Features: 2 differential DSL channels comprising current feedback, high output current amplifiers with integrated feedback resistors plus biasing network Ideal for use as ADSL/ADSL2+ dual-channel central office (CO) line drivers Low power consumption using Class H technology Single 12.5 V supply operation 20.4 dBm line power, 1:1 transformer Less than 600 mW per channel total power dissipation while driving 20.4 dBm (includes 110 mW line power) Less than 275 mW per channel total power dissipation while driving 14.5 dBm (including line power) High output voltage and current drive 43.4 V differential output voltage swing Low distortion −65 dBc typical multitone power ratio (MTPR) at 20.4 dBm, 26 kHz to 2.2 MHz Low cost protection components enable ITU-T-K20 and GR-1089 compliance

ADM1041 - SECONDARY-Side Controller with Current SHARE and HOUSEKEEPING

ADM1060 - Communication System Supervisory/Sequencing Circuit

ADM1060 - Communication System Supervisory/Sequencing Circuit

Microprocessor Supervisory in SOT-23 with Active High and Low Push-Pull Output Features: Reliable Low Cost Voltage Monitor with Reset Output Suitable for Monitoring 2.5 V, 3 V, 3.3 V, and 5 V Power Supply Voltages Reset Threshold Levels: 4.62 V, 4.35 V, 3.06 V, 2.88 V, 2.55 V, 2.31 V, and 2.18 V (Typ)Initialize Microprocessor Systems with Added Safety Open-Drain Output Choices (ADM1811, ADM1813, ADM1816, and ADM1818) Can Be Used with a Manual Push-Button to Generate a Reset (ADM1813, ADM1818) Available in 3-Lead SOT-23 and SC70 Packages Active High and Low Push-Pull Output Choices (ADM1810, ADM1812, ADM1815, and ADM1817)

5V, 12-Bit, Serial 220 kSPS ADC in a 8-Lead Package Features: Fast 12-Bit ADC with 220 kSPS Throughput Rate 8-Lead SOIC Single 5 V Supply Operation High Speed, Flexible, Serial Interface that Allows Interfacing to 3 V Processors On-Chip Track/Hold Amplifier Selection of Input Ranges: ±10 V for AD7898-10 ±2.5 V for AD7898-3 High Input Impedance Low Power: 22.5 mW Max

5 V Single Supply 14-Bit 400 kSPS ADC Features: Fast (2.2 µs) 14-Bit ADC 400 kSPS Throughput Rate 0.3 µs Track/Hold Acquisition Time Single Supply Operation High-Speed Parallel Interface which Also Allows Interfacing to 3 V Processors Low Power, 80 mW Typ Selection of Input Ranges: ±10 V, ±5 V and ±2.5 V 0 V to 2.5 V and 0 V to 5 V Power-Saving Mode, 20 µW Typ Overvoltage Protection on Analog Inputs Power-Down Mode via STBY Pin

8-Channel, 1 MSPS, 12-Bit ADC with Sequencer in 20-Lead TSSOP Features: Fast throughput rate: 1 MSPS Specified for AVDD of 2.7 V to 5.25 V Low Power: 6.0 mW max at 1 MSPS with 3 V supply 13.5 mW max at 1 MSPS with 5 V supply Eight (single-ended) inputs with sequencer Wide input bandwidth: AD7928, 70 dB min SINAD at 50 kHz input frequency Flexible power/serial clock speed management No pipeline delays High speed serial interface SPI®/QSPI™/MICROWIRE™/DSP compatible

Clock Drivers & Distribution 800MHz Clock Distribution IC pb free

10-Bit, 100 MSPS+ TxDAC D/A Converter Features: Member of Pin-Compatible TxDAC Product Family 125 MSPS Update Rate 10-Bit Resolution Excellent Spurious Free Dynamic Range Performance SFDR to Nyquist @ 40 MHz Output: 52 dBc Differential Current Outputs: 2 ma to 20 mA Edge-Triggered Latches See datasheet for additional features

16-Bit 160 MSPS 2x/4x/8x Interpolating Dual TxDAC+ D/A Converter Features: 16-bit resolution, 160 MSPS/400 MSPS input/output data rate Selectable 2×/4×/8× interpolating filter Programmable channel gain and offset adjustment fS/4, fS/8 digital quadrature modulation capability Fully compatible SPI® port Direct IF transmission mode for 70 MHz + IFs Enables image rejection architecture See datasheet for additional features

Dual, 12-Bit, 1 GSPS, Digital-to-Analog Converter Features: Low power: 1.0 W @ 1 GSPS, 600 mW @ 500 MSPS, full operating conditions Single carrier W-CDMA ACLR = 80 dBc @ 80 MHz IF Analog output: adjustable 8.7 mA to 31.7 mA, RL = 25 Ω to 50 Ω Novel 2×, 4×, and 8× interpolator/coarse complex modulator allows carrier placement anywhere in DAC bandwidth Auxiliary DACs allow control of external VGA and offset control Multiple chip synchronization interface High performance, low noise PLL clock multiplier Digital inverse sinc filter 100-lead, exposed paddle TQFP

AD7839 - OCTAL 13-Bit +/-10V OUTPUT DAC - Dual marked (AD7839AS)

16-Bit, 25 MSPS/65 MSPS/80 MSPS/105 MSPS, 1.8 V Dual Analog-to-Digital Converter (ADC) Features: 1.8 V analog supply operation 1.8 V CMOS or LVDS output supply SNR 82 dBFS at 30 MHz input and 105 MSPS data rate 83 dBFS at 9.7 MHz input and 25 MSPS data rate SFDR 90 dBc at 30 MHz input and 105 MSPS data rate 95 dBc at 9.7 MHz input and 25 MSPS data rate Low power 328 mW per channel at 105 MSPS 119 mW per channel at 25 MSPS Integer 1-to-8 input clock divider See data sheet for additional featuresAD9650-EP supports defense and aerospace applications (AQEC standard) Download AD9650-EP data sheet (pdf)

DIGITAL ISOLATOR 35NS SSOP-20; No. of Channels:2 Channel; Propagation Delay:35ns; Supply Voltage Min:2.7V; Supply Voltage Max:5.5V; Interface Case Style:SSOP; No. of Pins:20Pins; Operating Temperature Min:-40°C; Operating Temperature Max:105°C; Packaging:Each; Product Range:ADUM5211 Series; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016); No. of Channels:2Channels

Differential Amplifiers 3 MHz, bi-directional 65V Diff Amp

Operational Amplifiers - Op Amps SINGLE SUPPLY QUAD OP AMP

RF Demodulator IC 400MHz ~ 6GHz 24-WFQFN Exposed Pad, CSP

Digital to Analog Converters - DAC 8-BIT DAC IC

Standard Amplifier 1 Circuit Rail-to-Rail SC-70-5