12-Bit, 65 MSPS IF to Base Band Diversity Receiver Features: SNR = 90 dB in 150 kHz bandwidth (to Nyquist @ 61.44 MSPS) Worst harmonic = 83 dBc (to Nyquist @ 61.44 MSPS)INTEGRATED DUAL-CHANNEL ADC: Sample rates up to 65 MSPS IF sampling frequencies to 200 MHz Internal ADC voltage reference Integrated ADC sample and-hold inputs Flexible analog input range (1 V to 2 V p-p) Differential analog inputs ADC clock duty cycle stabilizer 85 dB channel isolation/crosstalkINTEGRATED WIDEBAND DIGITAL DOWNCONVERTER (DDC): Crossbar switched DDC inputs Digital resampling for noninteger decimation Programmable decimating FIR filters Flexible control for multicarrier and phased array Dual AGC stages for output level control Dual 16-bit parallel or 8-bit link output ports User-configurable built-in self-test (BIST) capability Energy-saving power-down modes

80 MHz Bandwidth, Dual IF Receiver Features: JESD204B Subclass 0 or Subclass 1 coded serial digital outputs Signal-to-noise ratio (SNR) = 71.9 dBFS at 185 MHz AIN and 250 MSPS with NSR set to 33% Spurious-free dynamic range (SFDR) = 88 dBc at 185 MHz AIN and 250 MSPS Total power consumption: 707 mW at 250 MSPS 1.8 V supply voltages Integer 1-to-8 input clock divider Sample rates of up to 250 MSPS IF sampling frequencies of up to 400 MHz Internal analog-to-digital converter (ADC) voltage reference See data sheet for additional features

80 MHz Bandwidth, IF Receiver Features: JESD204B Subclass 0 or Subclass 1 coded serial digital outputs Signal-to-noise ratio (SNR) = 71.9 dBFS at 185 MHz AIN and 250 MSPS with NSR set to 33% Spurious-free dynamic range (SFDR) = 87 dBc at 185 MHz AIN and 250 MSPS Total power consumption: 435 mW at 250 MSPS 1.8 V supply voltages Integer 1 to 8 input clock divider Sample rates of up to 250 MSPS IF sampling frequencies of up to 400 MHz Internal analog-to-digital converter (ADC) voltage reference Flexible analog input range 1.4 V p-p to 2.0 V p-p (1.75 V p-p nominal) ADC clock duty cycle stabilizer (DCS) Serial port control Energy saving power-down modes

135 MHz BW IF Diversity Receiver Features: Parallel LVDS (DDR) outputs In-band SFDR = 82 dBFS at 340 MHz (500 MSPS) In-band SNR = 67.8 dBFS at 340 MHz (500 MSPS) 1.1 W total power per channel at 500 MSPS (default settings) Noise density = −153 dBFS/Hz at 500 MSPS 1.25 V, 2.50 V, and 3.3 V dc supply operation Flexible input range: 1.46 V p-p to 2.06 V p-p (2.06 V p-p nominal) 95 dB channel isolation/crosstalk Amplitude detect bits for efficient automatic gain control (AGC) implementation Noise shaping requantizer (NSR) option for main receiver function See data sheet for additional features

Monolithic 16-Bit DACPORT Features: Complete 16-Bit D/A Function On-Chip Output Amplifier High Stability Buried Zener Reference Monolithic BiMOS II Construction ± LSB Integral Linearity Error 15-Bit Monotonic over Temperature Fast 40 ns Write Pulse Microprocessor Compatible 16-Bit Parallel Input Double-Buffered Latches Unipolar or Bipolar Output Low Glitch: 15 nV-s Low THD+N: 0.009% MIL-STD-883 Compliant Versions Available

16-Bit, Serial, 100 kSPS Sampling ADC. Features: Autocalibrating On-Chip Sample-Hold Function Serial Output 16 Bits No Missing Codes ±1 LSB INL –99 dB THD 92 dB S/(N+D) 1 MHz Full Power Bandwidth

LC2MOS Dual 12-Bit Serial DACPORT Features: Two 12-Bit CMOS DAC Channels with On-Chip Voltage Reference Output Amplifiers Three Selectable Output Ranges per Channel -5 V to + 5 V, 0 V to +5 V, 0 V to +10 V Serial Interface 125 kHz DAC Update Rate Small Size: 16-Lead DIP or SOIC Low Power Dissipation

12-Bit Power Amplifier Current Controller with ADC, DACs, Temperature and Current Sensors Features: 4 closed-loop power amplifier (PA) drain current controllers Built-in PA protection, sequencing, and alert features Compatible with both depletion mode and enhancement mode power amplifiers Highly integrated 4 uncommitted 12-bit analog-to-digital converter (ADC) inputs ±0.5 LSB typical integral nonlinearity (INL) Eight 12-bit voltage digital-to-analog converters (DACs) 1.3 μs maximum settling 4 high-side current sense amplifiers, ±0.1% gain error 2 external temperature sensor inputs, ±1.1°C accuracy Internal temperature sensor, ±1.25°C accuracy 2.5 V on-chip reference Flexible monitoring and control ranges ADC input ranges: 0 V to 1.25 V, 0 V to 2.5 V, and 0 V to 5 V Bipolar DAC ranges: 0 V to +5 V, −4 V to +1 V, and −5 V to 0 V Bipolar DAC reset and clamping relative to VCLAMPx voltage Unipolar DAC ranges: 0 V to 5 V, 2.5 V to 7.5 V, and 5 V to 10 V Current sense gain: 6.25, 12.5, 25, 50, 100, and more Adjustable closed-loop setpoint ramp time High-side voltage current sensing 4 current sense inputs 4 V to AVSS + 60 V, ±200 mV input range Small package and flexible interface Serial port interface (SPI) with VDRIVE supporting 1.8 V, 3 V, and 5 V interfaces 56-lead LFCSP Temperature range: −40°C to +125°C

12-Bit Monitor and Control System with Multichannel ADC, DACs, Temperature Sensor, and Current Sense Features: 12-bit SAR ADC with 3 μs conversion time 4 uncommitted analog inputs Differential/single-ended VREF, 2 × VREF input ranges 2 high-side current sense inputs 5 V to 59.4 V operating range 0.75% maximum gain error ±200 mV input range 1 internal temperature sensor: ±2°C accuracy Built-in monitoring features Minimum/maximum recorder for each channel Programmable alert thresholds Programmable hysteresis Internal 2.5 V reference 2-wire, fast mode I2C interface See data sheet for additional features

Ultra-Low Power, 2-Channel, Capacitance Converter for Proximity Sensing Features: Ultralow power 2.7 V to 3.6 V, 100 μA Response time: 10 ms Adaptive environmental compensation 2 independent capacitance input channels Sensor capacitance (CSENS) 0 pF up to 13 pF Sensitivity to 1 fF See datasheet for additional features

4.8 kHz Ultralow Noise 24-Bit Sigma-Delta ADC with PGA Features: RMS noise: 8.5 nV @ 4.7 Hz (gain = 128) 16 noise free bits @ 2.4 kHz (gain = 128) Up to 22.5 noise free bits (gain = 1) Offset drift: 5 nV/°C Gain drift: 1 ppm/°C Specified drift over time 2 differential/4 pseudo differential input channels Qualified for automotive applications See Data Sheet for Additional Information

Micropower DC/DC Converter Adjustable and Fixed 5V, 12V Features: Operates at Supply Voltages From 2.0V to 30V Consumes Only 110µA Supply Current Works in Step-Up or Step-Down Mode Only Three External Components Required Low Battery Detector Comparator On-Chip User-Adjustable Current Limit Internal 1A Power Switch Fixed or Adjustable Output Voltage Versions Space Saving 8-Pin MiniDIP or SO8 Package

500mA Negative Low Dropout Micropower Regulator Features: Operating Current: 45μA Adjustable Current Limit Low Voltage Linear Dropout Characteristics Stable with Wide Range of Output Capacitors Shutdown Current: 10μA Positive or Negative Shutdown Logic Fixed 5V and Adjustable Versions Tolerates Reverse Output Voltage Available in 8-pin PDIP and SO Packages, 3-lead SOT-223, 5-Pin Surface Mount DD and Through-Hole TO-220 Packages

500mA Negative Low Dropout Micropower Regulator Features: Operating Current: 45μA Adjustable Current Limit Low Voltage Linear Dropout Characteristics Stable with Wide Range of Output Capacitors Shutdown Current: 10μA Positive or Negative Shutdown Logic Fixed 5V and Adjustable Versions Tolerates Reverse Output Voltage Available in 8-pin PDIP and SO Packages, 3-lead SOT-223, 5-Pin Surface Mount DD and Through-Hole TO-220 Packages

500mA Negative Low Dropout Micropower Regulator Features: Operating Current: 45μA Adjustable Current Limit Low Voltage Linear Dropout Characteristics Stable with Wide Range of Output Capacitors Shutdown Current: 10μA Positive or Negative Shutdown Logic Fixed 5V and Adjustable Versions Tolerates Reverse Output Voltage Available in 8-pin PDIP and SO Packages, 3-lead SOT-223, 5-Pin Surface Mount DD and Through-Hole TO-220 Packages

500mA Negative Low Dropout Micropower Regulator Features: Operating Current: 45μA Adjustable Current Limit Low Voltage Linear Dropout Characteristics Stable with Wide Range of Output Capacitors Shutdown Current: 10μA Positive or Negative Shutdown Logic Fixed 5V and Adjustable Versions Tolerates Reverse Output Voltage Available in 8-pin PDIP and SO Packages, 3-lead SOT-223, 5-Pin Surface Mount DD and Through-Hole TO-220 Packages

500mA Negative Low Dropout Micropower Regulator Features: Operating Current: 45μA Adjustable Current Limit Low Voltage Linear Dropout Characteristics Stable with Wide Range of Output Capacitors Shutdown Current: 10μA Positive or Negative Shutdown Logic Fixed 5V and Adjustable Versions Tolerates Reverse Output Voltage Available in 8-pin PDIP and SO Packages, 3-lead SOT-223, 5-Pin Surface Mount DD and Through-Hole TO-220 Packages

500mA Negative Low Dropout Micropower Regulator Features: Operating Current: 45μA Adjustable Current Limit Low Voltage Linear Dropout Characteristics Stable with Wide Range of Output Capacitors Shutdown Current: 10μA Positive or Negative Shutdown Logic Fixed 5V and Adjustable Versions Tolerates Reverse Output Voltage Available in 8-pin PDIP and SO Packages, 3-lead SOT-223, 5-Pin Surface Mount DD and Through-Hole TO-220 Packages

500mA Negative Low Dropout Micropower Regulator Features: Operating Current: 45μA Adjustable Current Limit Low Voltage Linear Dropout Characteristics Stable with Wide Range of Output Capacitors Shutdown Current: 10μA Positive or Negative Shutdown Logic Fixed 5V and Adjustable Versions Tolerates Reverse Output Voltage Available in 8-pin PDIP and SO Packages, 3-lead SOT-223, 5-Pin Surface Mount DD and Through-Hole TO-220 Packages

CCFL/LCD Contrast Switching Regulators Features: Wide Input Voltage Range: 3V to 30V Low Quiescent Current High Switching Frequency: 200kHz CCFL Switch: 1.25A, LCD Switch: 625mA Grounded or Floating Lamp Configurations Open-Lamp Protection Positive or Negative Contrast Capability