High Accuracy Ultralow Quiescent Current, 1A, anyCAP Dropout Regulator Features: High Accuracy Over Line and Load: ±0.8% @ 25°C, ±1.4% Over Temperature Ultralow Dropout Voltage: 190 mV (Typ) @ 1 A Requires Only CO = 1 µF for Stability anyCAP = Stable with Any Type of Capacitor (Including MLCC) Current and Thermal Limiting Low Noise 2.7 V to 8 V Supply Range –40°C to +85°C Ambient Temperature Range SOT-223 Package

Precision, Dual-Channel Instrumentation Amplifier Features: Two channels in small 4 mm × 4 mm LFCSP Gain set with 1 resistor per amplifier (G = 1 to 10,000) Low noise 8 nV/√Hz at 1 kHz 0.25 µV p-p (0.1 Hz to 10 Hz) High accuracy dc performance (B grade) 60 µV maximum input offset voltage 0.3 µV/°C maximum input offset drift 1.0 nA maximum input bias current 126 dB minimum CMRR (G = 100) Excellent ac performance 140 kHz bandwidth (G = 100) 13 µs settling time to 0.001% Differential output option (single channel) Fully specified Adjustable common-mode output Supply range: ±2.3 V to ±18 V Download AD8222-KGD Data Sheet. Available As Known Good Die and fully guaranteed to data sheet specifications

16-Bit, 2.5 MHz/5 MHz/10 MHz, 30 MSPS to 160 MSPS Dual Continuous Time Sigma-Delta ADC Features: SNR: 83 dB (85 dBFS) to 10 MHz input SFDR: 87 dBc to 10 MHz input Noise figure: 15 dB Input impedance: 1 kΩ Power: 600 mW 1.8 V analog supply operation 1.8 V to 3.3 V output supply Selectable bandwidth 2.5 MHz/5 MHz/10 MHz real 5 MHz/10 MHz/20 MHz complex Output data rate: 30 MSPS to 160 MSPS See data sheet for additional features

0.8 A, Low VIN, Low Dropout Linear Regulator

2 A, Low VIN, Low Dropout Linear Regulator

2 A, Low VIN, Low Dropout Linear Regulator

Low Power JFET-Input Op Amps

Low Power JFET-Input Dual Op Amp Features: Low input bias current: 50 pA maximum Offset voltage 1.5 mV maximum for ADA4062-2 B grade 2.5 mV maximum for ADA4062-2 A grade Offset voltage drift: 4 μV/°C typical Slew rate: 3.3 V/μs typical CMRR: 90 dB typical Low supply current: 165 μA typical High input impedance Unity-gain stable Packaging: SOIC, MSOP, LFCSP and TSSOP

Low Cost, 300 MHz Rail-to-Rail Amplifiers

Low Cost, 300 MHz Rail-to-Rail Amplifier (Single) Features: Low cost Single (AD8061), dual (AD8062) Single with disable (AD8063) High speed - Please see data sheet for additional information. Low offset voltage: 6 mV Max High speed - Please see data sheet for additional information. Operates on 2.7 V to 8 V supplies Input voltage range = −0.2 V to +3.2 V with VS = 5 V Excellent video specifications (RL = 150 Ω, G = 2) - Please see data sheet for additional information. Please see data sheet for addtional features

Low Cost, 300 MHz Rail-to-Rail Amplifiers

AD8063 - Operational Amplifier, 1 Func, 6000uV Offset-Max, BIPolar, PDSO8

1 MSPS , 8-Channel, Software Selectable True Bipolar Input, 12-Bit Plus Sign A/D Converter Features: 12-Bit Plus Sign SAR ADC Accepts True Bipolar Analog Inputs Software Selectable input Ranges:  ±10V, ±5V, ±2.5V, 0 to 10 V Eight Analog Input Channels with Channel Sequencer Single Ended, True Differential and Pseudo Differential Analog Input Capability High Impedance Analog Inputs Low Power: 21 mW High Speed Serial Interface SPI/QSPI/DSP/MICROWIRE Compatible MuxOUT and ADCIN pins allows separate access to Mux and ADC iCMOS™ Process Technology 24 Lead TSSOP package

Quad-Channel Isolators with Integrated DC-to-DC Converter

CCD Signal Processor with V-Driver and Precision Timing Generator

+3 V/+5 V, Dual, Serial Input 12-Bit DAC

MicroConverter, Dual-Channel 16-Bit ADCs with Embedded Flash MCU

80/sec Yaw Rate Gyroscope with SPI

High Speed, Triple Differential Receiver with Comparators Features: High speed: 500 MHz, 2000 V/μs @ G = 1, VOUT = 2 V p-p 0.1 dB flatness out to 75 MHz High CMRR: 69 dB @ 10 MHz High differential input impedance: 1 MΩ Wide input common-mode range: ±3.5 V (±5 V supplies) On-chip, gain setting resistors can be configured for gain of 1 or 2 Fast settling: 15 ns to 0.1% @ 2 V p-p Low input referred noise: 13 nV/√Hz Disable feature Small packaging: 32-lead, 5 mm × 5 mm LFCSP AEC-Q10 qualified (AD8145W)

High Speed, Triple Differential Receiver with Comparators Features: High speed: 500 MHz, 2000 V/μs @ G = 1, VOUT = 2 V p-p 0.1 dB flatness out to 75 MHz High CMRR: 69 dB @ 10 MHz High differential input impedance: 1 MΩ Wide input common-mode range: ±3.5 V (±5 V supplies) On-chip, gain setting resistors can be configured for gain of 1 or 2 Fast settling: 15 ns to 0.1% @ 2 V p-p Low input referred noise: 13 nV/√Hz Disable feature Small packaging: 32-lead, 5 mm × 5 mm LFCSP AEC-Q10 qualified (AD8145W)