Dual 12-/14-/16-Bit, LVDS Interface, 500 MSPS DACs

High Bandwidth, Bidirectional 65 V Difference Amplifier

Complete, Dual, 12-/14-/16-Bit, Serial Input, Unipolar/Bipolar, Voltage Output DACs

6-Output Clock Generator with Integrated 2.0 GHz VCO

6-OUTPUT CLOCK GENERATOR WITH 2.8GHZ; Silicon Manufacturer:Analog Devices; Silicon Core Number:AD9518-1; Kit Application Type:Clock & Timing; Application Sub Type:PLL Clock Synthesizer; Kit Contents:Eval Board AD9518-1; Product Range:AD9518-1 Series; SVHC:No SVHC (20-Jun-2016); Features:Automatic Synchronization of All O/P on Power-up Manual O/P Synchronization Available

12-Output Clock Generator with Integrated 2.8 GHz VCO Features: Low phase noise, phase-locked loop (PLL) On-chip VCO tunes from 2.55 GHz to 2.95 GHz External VCO/VCXO to 2.4 GHz optional 1 differential or 2 single-ended reference inputs Reference monitoring capability Automatic revertive and manual reference switchover/holdover modes 2 pairs of 1.6 GHz LVPECL outputs Each output pair shares a 1-to-32 divider with coarse phase delay Additive output jitter: 225 fs rms Channel-to-channel skew paired outputs of <10 ps Accepts LVPECL, LVDS, or CMOS references to 250 MHz Programmable delays in path to PFD Digital or analog lock detect, selectable 2 pairs of 800 MHz LVDS clock outputs Each output pair shares two cascaded 1-to-32 dividers with coarse phase delay Additive output jitter: 275 fs rms Fine delay adjust (Δt) on each LVDS output Each LVDS output can be reconfigured as two 250 MHz CMOS outputs Automatic synchronization of all outputs on power-up Manual output synchronization available See datasheet for additional features

Octal LNA/VGA/AAF/ADC and Crosspoint Switch Features: 8 channels of LNA, VGA, AAF, and ADC Low noise preamplifier (LNA)  Input-referred noise = 1.1 nV/√Hz @ 5 MHz typical, gain = 18 dB  SPI-programmable gain = 14 dB/15.6 dB/18 dB  Single-ended input; VIN maximum = 400 mVP-P/333 mV p-p/250 mVP-P Dual-mode active input impedance matching  Bandwidth (BW) > 70 MHz  Full-scale (FS) output = 2 VP-P differential Variable gain amplifier (VGA)  Gain range = −6 dB to +24 dB  Linear-in-dB gain control Antialiasing filter (AAF)  3rd-order Butterworth cutoff  Programmable from 8 MHz to 18 MHz See Data Sheet for Additional Information

Broadband Modem Mixed-Signal Front End

Blackfin Embedded Processor

Low Power Blackfin Processor with Advanced Peripherals and Low Standby Power Features: Lockbox™ Secure Technology: Hardware-enabled security for code and content protection. Blackfin Processor Core with up to 400 MHz (800 MMACS) performance 2 dual-channel, full-duplex synchronous serial ports supporting 8 stereo I2S channels 12 peripheral DMA channels supporting one- and two-dimensional data transfers 289-ball, 12x12 mm, 0.5 mm pitch mini-BGA (Commercial temperature range 0°C to +70°C) NAND Flash Controller with 8-Bit interface for commands, addresses and data Connectivity: Host DMA Port, UART’s, SPORT’s, SPI and TWI Memory controller providing glue-less connection to multiple banks of external SDRAM, SRAM, Flash, or ROM Low Standby Power; ~1mA Deep Sleep, ~50uA Hibernate 208-ball, 17x17 mm, 0.8 mm pitch mini-BGA (Commercial temperature range 0°C to +70°C; Industrial temperature range -40°C to +85°C*)

16-Bit, ±0.5 LSB, 500 kSPS PulSAR® Differential ADC in MSOP/QFN

Isolated Sigma-Delta Modulator

Isolated Sigma-Delta Modulator Features: 10 MHz clock rate Second-order modulator 16 bits no missing codes ±2 LSB INL typical at 16 bits 3.5 μV/°C maximum offset drift On-board digital isolator On-board reference Low power operation: 18 mA maximum at 5.25 V −40°C to +105°C operating range 16-lead SOIC package See attached Data Sheet for more Features.

Dual 12-/14-/16-Bit nanoDAC® with 5 ppm/°C On-Chip Reference

ADC, Successive Approximation, 14-Bit, 1 Func, 4 Channel, Parallel, Word Access, CMOS, PDSO28

ADC, Successive Approximation, 14-Bit, 1 Func, 4 Channel, Parallel, Word Access, CMOS, PDSO28

Simultaneous Sampling Dual 175 kSPS 14-Bit A/D Converter Features: Two fast 14-bit ADCs Four input channels Simultaneous sampling and conversion 5.2 μs conversion time Single supply operation High speed parallel interface Low power, 70 mW typical Selection of input ranges  ±10 V for AD7863-10  ±2.5 V for AD7863-3  0 V to 2.5 V for AD7863-2 Power saving mode, 105 μW maximum Overvoltage protection on analog inputs 14-bit lead compatible upgrade to AD7862

Nonvolatile Memory, Dual 1024-Position Digital Resistor Features: Dual-channel, 1024-position resolution 25 kΩ, 250 kΩ nominal resistance Maximum ±8% nominal resistor tolerance error Low temperature coefficient: 35 ppm/°C 2.7 V to 5 V single supply or ±2.5 V dual supply Current monitoring configurable function SPI-compatible serial interface Nonvolatile memory stores wiper settings Power-on refreshed with EEMEM settings Permanent memory write protection Resistance tolerance stored in EEMEM 26 bytes extra nonvolatile memory for user-defined information 1M programming cycles 100-year typical data retention

Continuous Rate 10 Mbps to 2.7 Gbps Clock and Data Recovery ICs

Continuous Rate 10 Mb/s to 675 Mb/s Clock and Data Recovery IC with Integrated Limiting Amp Features: Serial data input: 10 Mb/s to 675 Mb/s Exceeds SONET requirements for jitter transfer/generation/tolerance Quantizer sensitivity: 3.3 mV typical Adjustable slice level: ±95 mV Patented clock recovery architecture Loss-of-signal (LOS) detect range: 2.3 mV to 19 mV Independent slice level adjust and LOS detector No reference clock required Loss-of-lock indicator I2C™ interface to access optional features Single-supply operation: 3.3 V Low power: 435 mW typical 5 mm × 5 mm, 32-lead LFCSP, Pb free