Low Quiescent Current Ideal Diode Controller Features: Reduces Power Dissipation by Replacing a Power Schottky Diode Low Quiescent Current: 5μA Operating Wide Operating Voltage Range: 2.5V to 80V Reverse Supply Protection to –28V No TVS Input Clamps Required High Side External N-Channel MOSFET Drive Drives Back-to-Back MOSFETs for Inrush Control and Load Switching Shutdown Input for ON/OFF Control Fast Reverse Current Turn-Off within 1.5μs 8-Lead MSOP and 3mm × 3mm DFN Packages

Low Quiescent Current Ideal Diode Controller Features: Reduces Power Dissipation by Replacing a Power Schottky Diode Low Quiescent Current: 5μA Operating Wide Operating Voltage Range: 2.5V to 80V Reverse Supply Protection to –28V No TVS Input Clamps Required High Side External N-Channel MOSFET Drive Drives Back-to-Back MOSFETs for Inrush Control and Load Switching Shutdown Input for ON/OFF Control Fast Reverse Current Turn-Off within 1.5μs 8-Lead MSOP and 3mm × 3mm DFN Packages

Low Quiescent Current Ideal Diode Controller Features: Reduces Power Dissipation by Replacing a Power Schottky Diode Low Quiescent Current: 5μA Operating Wide Operating Voltage Range: 2.5V to 80V Reverse Supply Protection to –28V No TVS Input Clamps Required High Side External N-Channel MOSFET Drive Drives Back-to-Back MOSFETs for Inrush Control and Load Switching Shutdown Input for ON/OFF Control Fast Reverse Current Turn-Off within 1.5μs 8-Lead MSOP and 3mm × 3mm DFN Packages

7A Ideal Diode with Reverse Input Protection Features: Reduces Power Dissipation by Replacing a Power Schottky Diode Wide Operating Voltage Range: 4V to 40V Internal 15mΩ N-Channel MOSFET Reverse Input Protection to –40V   Low 9μA Shutdown Current Low 150μA Operating Current Smooth Switchover without Oscillation Available in 16-Pin 5mm × 4mm DFN Package AEC-Q100 Qualified for Automotive Applications

Low Quiescent Current Surge Stopper Features: Low Quiescent Current: 8µA Operating Withstands Surge Voltage Up to the MOSFET Limit Wide Operating Voltage Range: 4V to 72V Overcurrent Protection Selectable Internal 31.5V/50V or Adjustable Gate Clamp Voltage Reverse Input Protection to –60V Adjustable Turn-On Threshold Adjustable Fault Timer with MOSFET Stress Acceleration Controls N-Channel MOSFET Latchoff and Retry Options Low Retry Duty Cycle During Faults 10-Pin DFN (3mm × 3mm) and MSOP Packages AEC-Q100 Qualified for Automotive Applications

Low Quiescent Current Surge Stopper Features: Low Quiescent Current: 8µA Operating Withstands Surge Voltage Up to the MOSFET Limit Wide Operating Voltage Range: 4V to 72V Overcurrent Protection Selectable Internal 31.5V/50V or Adjustable Gate Clamp Voltage Reverse Input Protection to –60V Adjustable Turn-On Threshold Adjustable Fault Timer with MOSFET Stress Acceleration Controls N-Channel MOSFET Latchoff and Retry Options Low Retry Duty Cycle During Faults 10-Pin DFN (3mm × 3mm) and MSOP Packages AEC-Q100 Qualified for Automotive Applications

Low Quiescent Current Surge Stopper Features: Low Quiescent Current: 8µA Operating Withstands Surge Voltage Up to the MOSFET Limit Wide Operating Voltage Range: 4V to 72V Overcurrent Protection Selectable Internal 31.5V/50V or Adjustable Gate Clamp Voltage Reverse Input Protection to –60V Adjustable Turn-On Threshold Adjustable Fault Timer with MOSFET Stress Acceleration Controls N-Channel MOSFET Latchoff and Retry Options Low Retry Duty Cycle During Faults 10-Pin DFN (3mm × 3mm) and MSOP Packages AEC-Q100 Qualified for Automotive Applications

Low Quiescent Current Surge Stopper Features: Low Quiescent Current: 8µA Operating Withstands Surge Voltage Up to the MOSFET Limit Wide Operating Voltage Range: 4V to 72V Overcurrent Protection Selectable Internal 31.5V/50V or Adjustable Gate Clamp Voltage Reverse Input Protection to –60V Adjustable Turn-On Threshold Adjustable Fault Timer with MOSFET Stress Acceleration Controls N-Channel MOSFET Latchoff and Retry Options Low Retry Duty Cycle During Faults 10-Pin DFN (3mm × 3mm) and MSOP Packages AEC-Q100 Qualified for Automotive Applications

Low Quiescent Current Surge Stopper Features: Low Quiescent Current: 8µA Operating Withstands Surge Voltage Up to the MOSFET Limit Wide Operating Voltage Range: 4V to 72V Overcurrent Protection Selectable Internal 31.5V/50V or Adjustable Gate Clamp Voltage Reverse Input Protection to –60V Adjustable Turn-On Threshold Adjustable Fault Timer with MOSFET Stress Acceleration Controls N-Channel MOSFET Latchoff and Retry Options Low Retry Duty Cycle During Faults 10-Pin DFN (3mm × 3mm) and MSOP Packages AEC-Q100 Qualified for Automotive Applications

Micropower, Dual, Single Supply Precision Op Amp Features:Absolute Maximum Ratings Supply Voltage: ±22V Differential Input Voltage: ±30V Input Voltage: Equal to Positive Supply Voltage 0.5V Below Negative Supply Voltage Output Short-Circuit Duration: IndefiniteOperating Temperature Range: –55°C to 125°CStorage Temperature Range: –55°C to 150°CLead Temperature (Soldering, 10 sec): 300°C

Operational Amplifier Features:Absolute Maximum Ratings Supply Voltage: ±20V Differential Input Current (Note 1): ±10mA Input Voltage (Note 2): ±15V Output Short-Circuit Duration: Indefinite Operating Temperature Range: –55°C to 125°C Storage Temperature Range: –65°C to 150°C Lead Temperature (Soldering, 10 sec): 300°C

Radiation Hardened Ultralow Noise Precision High Speed Op Amps Features: Voltage Noise 1.6nV/√Hz Max. at 1kHz 0.9nV/√Hz Typ. at 1kHz 4.7nV/√Hz Typ. at 10Hz Gain-Bandwidth Product RH1028: 50MHz Min. RH1128: 11MHz Min. Slew Rate RH1028: 11V/µs Min. RH1128: 4.5V/µs Min. Offset Voltage: 80µV Max. Drift with Temperature: 1.0µV/°C Max. Voltage Gain: 5 Million Min.Radiation Performance Total Ionizing Dose (TID) Tolerance, per TM1019.8, MIL-STD-883: 200kRad (Si), per condition A at 50Rads (Si)/sec

Negative Adjustable Regulator Features:Absolute Maximum Ratings Power Dissipation: Internally Limited Input-to-Output Voltage Differential: 30V Operating Junction Temperature Range: –55°C to 150°C Storage Temperature Range: –65°C to 150°C Lead Temperature (Soldering, 10 sec): 300°C

Precision Operational Amplifier Features:Absolute Maximum Ratings Supply Voltage ±22V Internal Power Dissipation 500mW Input Voltage Equal to Supply Voltage Output Short-Circuit Duration Indefinite Differential Input Voltage (Note 8) ±25mA Operating Temperature Range –55°C to 125°C Junction Temperature Range –55°C to 150°C Storage Temperature Range –65°C to 150°C Lead Temperature (Soldering, 10 sec) 300°C

1 A/0.6 A, DC-to-DC Switching Regulator with Independent Positive and Negative Outputs Features: Wide input supply voltage range: 2.85 V to 15 V Generates well regulated, independently resistor programmable VPOS and VNEG outputs Boost regulator to generate VPOS output Adjustable positive output to 39 V Integrated 1.0 A main switch Optional single-ended primary-inductor converter (SEPIC) configuration for automatic step-up/step-down Inverting regulator to generate VNEG output Adjustable negative output to VIN − 39 V Integrated 0.6 A main switch True shutdown for both positive and negative outputs 1.2 MHz/2.4 MHz switching frequency with optional external frequency synchronization from 1.0 MHz to 2.6 MHz Resistor programmable soft start timer Slew rate control for lower system noise Individual precision enable and flexible start-up sequence control for symmetric start, VPOS first, or VNEG first Out-of-phase operation UVLO, OCP, OVP, and TSD protection 4 mm × 4 mm, 20-lead LFCSP and 20-lead TSSOP −40°C to +125°C junction temperature range Supported by the ADIsimPower tool set

40 V, 200 mA, Low Noise, CMOS LDO Linear Regulator Features: Low noise: 11 μV rms independent of fixed output voltage PSRR of 88 dB at 10 kHz, 68 dB at 100 kHz, 50 dB at 1 MHz, VOUT ≤ 5 V, VIN = 7 V Input voltage range: 2.7 V to 40 V Maximum output current: 200 mA Initial accuracy: ±0.8% Accuracy over line, load, and temperature −1.2% to +1.5%, TJ = −40°C to +85°C ±1.8%, TJ = −40°C to +125°C Low dropout voltage: 200 mV (typical) at a 200 mA load, VOUT = 5 V User programmable soft start (LFCSP and SOIC only) Low quiescent current, IGND = 50 μA (typical) with no load Low shutdown current: 1.8 μA at VIN = 6 V, 3.0 μA at VIN = 40 V Stable with a small 2.2 μF ceramic output capacitor Fixed output voltage options: 1.8 V, 2.5 V, 3.3 V, 3.8 V, and 5.0 V 15 standard voltages between 1.2 V and 5.0 V are available Adjustable output from 1.2 V to VIN – VDO, output can be adjusted above initial set point Precision enable 2 mm × 2 mm, 6-lead LFCSP, 8-Lead SOIC, 5-Lead TSOT AEC-Q100 qualified for automotive applications

Low IQ Boost/SEPIC/Inverting Converter with 2A, 60V Switch Features: Wide Input Voltage Range: 2.8V to 60V Ultralow Quiescent Current and Low Ripple Burst Mode® Operation: IQ = 9µA 2A, 60V Power Switch Positive or Negative Output Voltage Programming with a Single Feedback Pin Programmable Frequency (300kHz to 2MHz) Synchronizable to an External Clock Spread Spectrum Frequency Modulation for Low EMI BIAS Pin for Higher Efficiency Programmable Undervoltage Lockout (UVLO) Thermally Enhanced 10-lead 3mm × 3mm DFN and 16-lead MSOP packages AEC-Q100 Qualified for Automotive Applications

Ultralow Power Boost Converter with Output Disconnect Features: Ultralow Quiescent Current 8.5μA in Active Mode 0μA in Shutdown Mode Comparator Built into SHDN pin Low Noise Control Scheme Adjustable FB reference voltage Wide Input Range: 2.5V to 16V Wide Output Range: Up to 40V Integrated Power NPN Switch 25mA Current Limit (LT8410) 8mA Current Limit (LT8410-1) Integrated Schottky Diode Integrated Output Disconnect High Value (12.4M/0.4M) Feedback Resistors Integrated Built in Soft-Start (Optional Capacitor from VREF to GND) Overvoltage Protection for CAP and VOUT pins Tiny 8-Pin 2mm × 2mm DFN package

42V, 2A/3A Peak Synchronous Step-Down Regulator with 2.5A Quiescent Current Features: Silent Switcher® 2 Architecture Ultralow EMI Emissions on Any PCB Eliminates PCB Layout Sensitivity Internal Bypass Capacitors Reduce Radiated EMI Optional Spread Spectrum Modulation Wide Input Voltage Range: 3.0V to 42V Ultralow Quiescent Current Burst Mode® Operation: <2.5µA IQ Regulating 12VIN to 3.3VOUT Output Ripple <10mVP-P High Efficiency 2MHz Synchronous Operation: >93% Efficiency at 1A, 12VIN to 5VOUT 2A Maximum Continuous Output, 3A Peak Transient Output Fast Minimum Switch-On Time: 45ns Adjustable and Synchronizable: 200kHz to 2.2MHz Allows Use of Small Inductors Low Dropout Peak Current Mode Operation Internal Compensation Output Soft-Start and Tracking Small 16-Lead 3mm × 3mm LQFN Package AEC-Q100 Qualified for Automotive Applications

PDM Digital Input, Mono 2.5 W Class D Audio Amplifier Features: Filterless digital Class-D amplifier Pulse density modulation (PDM) digital input interface 2.7 W into 4 Ω load and 1.4 W into 8 Ω load at 5.0 V supply with <1% total harmonic distortion plus noise (THD + N) Available in 9-ball, 1.2 mm × 1.2 mm, 0.4 mm pitch WLCSP 93% efficiency into 8 Ω at full scale Output noise: 25 µV rms at 3.6 V, A-weighted THD + N: 0.005% at 1 kHz, 100 mW output power PSRR: 80 dB at 217 Hz, with dither input Quiescent power consumption: 5.1 mW (VDD = 1.8 V, PVDD = 3.6 V, 8 Ω + 33 µH load) Pop-and-click suppression Configurable with PDM pattern inputs Short-circuit and thermal protection with autorecovery Smart power-down when PDM stop condition or no clock input detected 64 × fS or 128 × fS operation supporting 3 MHz and 6 MHz clocks DC blocking high-pass filter and static input dc protection User-selectable ultralow EMI emissions and low latency modes Power-on reset (POR) Minimal external passive components