2.7 V to 5.5 V, Serial-Input, Voltage-Output, 16-Bit nanoDAC in 10-lead LFCSP, 16-lead 3 mm x 3 mm LFCSP, and 16-lead TSSOP Features: 12-/16-bit resolution 1 LSB INL 11.8 nV/√Hz noise spectral density 1 μs settling time 1.1 nV-sec glitch energy 0.05 ppm/°C temperature drift 5 kV HBM ESD classification See data sheet for additional features Also available in16-lead TSSOP

ADP5022 - Dual 3 MHz, 600mA Buck Regulator with 150mA LDO

Dual HDMI Receiver, Multiformat HDTV Video Decoder, And RGB Graphics Digitizer

Low Cost, High Speed, Rail-to-Rail, Output Op Amps

16-Bit, 1 MSPS PulSAR ADC in MSOP/QFN

16-Bit, 1 MSPS PulSAR ADC in MSOP/QFN

16-Bit, 1 MSPS PulSAR ADC in MSOP/QFN

Filterless High Efficiency Mono 3 W Class-D Audio Amplifier Features: Filterless Class-D amplifier with spread-spectrum Σ-Δ modulation 3 W into 3 load and 1.4 W into 8 load at 5.0 V supply with <1% total harmonic distortion (THD + N) 93% efficiency at 5.0 V, 1.4 W into 8 speaker >100 dB signal-to-noise ratio (SNR) High PSSR at 217 Hz: 80 dB Flexible gain adjustment pin: 0 dB to 12 dB in 3 dB steps Fixed input impedance: 80 k User-selectable ultralow EMI emissions mode Single-supply operation from 2.5 V to 5.5 V 20 nA shutdown current Short-circuit and thermal protection with autorecovery Available in 9-ball, 1.5 mm × 1.5 mm WLCSP Pop-and-click suppression

Multiple Output, High Precision, Dual Tracking Reference Features:Low drift: 1.5 ppm/CLow initial error: 1 mVPin programmable output+10 V, +5 V, 5 V tracking, 5 V, 10 VFlexible output force and sense terminalsHigh impedance ground senseSOIC_W-16 and CERDIP-16 packagesMIL-STD-883-compliant versions available

Precision, Selectable Gain, Fully Differential Funnel Amplifier Features: Precision attenuation: G = 0.4, G = 0.8 Fully differential or single-ended input/output Differential output designed to drive precision ADCs Drives switched capacitor and Σ-Δ ADCs Rail-to-rail output VOCM pin adjusts output common-mode voltage Robust overvoltage protection up to ±15 V (VS = +5 V) Single supply: 3 V to 10 V Dual supplies: ±1.5 V to ±5 V High performance Suited for driving 18-bit converters up to 4 MSPS 10 nV/√Hz output noise 3 ppm/°C gain drift 500 μV maximum output offset 50 V/μs slew rate Low power: 3.2 mA supply current

Ultra Low Quiescent Current 150 mA, CMOS Linear Regulator Features: Ultralow quiescent current: IQ = 560 nA with 0 μA load IQ = 860 nA with 1 μA load Stable with 1 μF ceramic input and output capacitors Maximum output current: 150 mA Input voltage range: 2.2 V to 5.5 V Low shutdown current: < 50 nA typical Low dropout voltage: 195 mV @ 150 mA load Initial accuracy: ±1% Accuracy over line, load, and temperature: ±3.5% 15 fixed output voltage options: 1.2 V to 4.2 V Adjustable output available PSRR performance of 72 dB @ 100 Hz See data sheet for additional features Logic-control enable

Ultralow Power Video Filter with Power-Down

12-Bit, 170/210 MSPS 3.3 V A/D Converter

Low Noise, Micropower 5.0 V Precision Voltage Reference

16-Bit, 1 MSPS PulSAR ADC in MSOP/QFN

Zero Drift, High Voltage, Bidirectional Difference Amplifier Features: Ideal for current shunt applications EMI filters included 1 μV/°C maximum input offset drift High common-mode voltage range −4 V to +65 V operating (5V supply) −4 V to +35V operating (3.3V supply) −25 V to +75 V survival Gain = 20 V/V 3.3 V to 5.5 V supply range Wide operating temperature range: −40°C to +125°C Bidirectional current monitoring <500 nV/°C typical offset drift <10 ppm/°C typical gain drift >90 dB CMRR dc to 10 kHz Qualified for automotive applications

ADSP-21060 - SHARC Digital Signal Processor

ADSP-21062 - SHARC Digital Signal Processor

High Performance, Wide Bandwidth Accelerometer

4-Channel, LVDS, Dual-Output, Laser Diode Driver with Oscillator Features: Dual, current-controlled output current sources with 4 input channels TTL-selectable output Stable on-chip oscillators with independent frequency and amplitude control TTL- or LVDS-selectable write channel enables negative logic Independent TTL oscillator enables positive logic 170 mA minimum output current for the read channel 510 mA minimum output current for Write Channel 1 330 mA minimum output current for Write Channel 2 165 mA minimum output current for Write Channel 3 950 mA typical total output current Typical rise time/fall time of  0.8 ns Low power consumption Single 5 V power supply (±10%)