8-Channel JFET Analog Multiplexers (Overvoltage & Power Supply Loss Protected) Features: JFET Switches Rather than CMOS Low 'ON' Resistance: 220Ω Highly Resistant to Static Discharge Damage NO SCR Latch-Up Problems 125°C Temperature Tested Dice Available MUX-08 Pin Compatible with DG508, HI-508A, IH5108, IH6108, LF11508, 12508, 13508, AD7506 See datasheet for additional features

IC A/D CONVERTER SINGLE 16-BIT HYBRID SOP 28PIN

MicroConverter, Dual-Channel 16-Bit ADCs with Embedded Flash MCU Features: High-Resolution Sigma-Delta ADCs Dual 16-Bit Independent ADCs Programmable Gain Front End 16-Bit No Missing Codes, Primary ADC 13-Bit p-p Resolution @ 20 Hz, 20 mV Range 16-Bit p-p Resolution @ 20 Hz, 2.56 V Range Memory 8 Kbytes On-Chip Flash/EE Program Memory 640 Bytes On-Chip Flash/EE Data Memory Flash/EE, 100 Year Retention, 100 Kcycles Endurance 256 Bytes On-Chip Data RAM 8051-Based Core 8051-Compatible Instruction Set (12.58 MHz Max) 32 kHz External Crystal, On-Chip Programmable PLL Three 16-Bit Timer/Counters 26 Programmable I/O Lines 11 Interrupt Sources, Two Priority Levels Power Specified for 3 V and 5 V Operation Normal: 3 mA @ 3 V (Core CLK = 1.5 MHz) Power-Down: 20 μA (32 kHz Crystal Running) On-Chip Peripherals On-Chip Temperature Sensor 12-Bit Voltage Output DAC Dual Excitation Current Sources Reference Detect Circuit Time Interval Counter (TIC) UART Serial I/O I2C®-Compatible and SPI® Serial I/O Watchdog Timer (WDT), Power Supply Monitor (PSM)

Dual-Channel Digital Isolator, Enhanced System-Level ESD Reliability Features: Enhanced system-level ESD performance per IEC 61000-4-x  High temperature operation: 125°C Default low output Narrow body, RoHS-compliant, 8-lead SOIC Low power operation  5 V operation (refer to data sheet) 3.3 V operation (refer to data sheet) High data rate: dc to 25 Mbps (NRZ) See data sheet for additional featuresADuM3210-EP supports defense and aerospace applications (AQEC standard) Download ADuM3210-EP Data Sheet (pdf) Military temperature range: −55°C to +125°C Controlled manufacturing baseline Enhanced product change notification Qualification data available on request Qualified for automotive applications V62/14627 DSCC Drawing Number

Isolated Switching Regulators (0/4 Channel Directionality) Features: Isolated PWM Controller Integrated transformer driver Regulated adjustable output: 3.3 V to 24 V 2 W output power 70% efficiency at guaranteed load of 400 mA at 5.0 V output Quad dc-to-25 Mbps (NRZ) signal isolation channels 20-lead SSOP package High temperature operation: 105°C High common-mode transient immunity: >25 kV/μs 200 kHz to 1 MHz adjustable oscillator frequency Soft start function at power-up Pulse-by-pulse overcurrent protection Thermal shutdown 2500 V rms isolation Evaluation Board available Automotive Qualified

Quad-Channel Isolators with Integrated DC/DC Converter (1/3 channel directionality) Features: isoPower integrated, isolated DC/DC converter Regulated 3.3 V or 5 V output Up to 400 mW output power Quad dc-to-25 Mbps (NRZ) signal isolation channels Schmitt trigger inputs 16-lead SOIC package with 7.6 mm creepage High temperature operation: 105°C High common-mode transient immunity: >25 kV/μs See data sheet for additional features

ADV476 - CMOS Monolithic 256 X 18 Color PALETTE RAM-DAC

16 Bit Digital to Analog Converter 4 64-QFN (9x9)

Switching Voltage Regulators 17V, 1A, 1MHz Synchronous Step-Down Regulator with Ultralow Quiescent Current

Audio Dual Matched NPN Transistor Features: Very low voltage noise: 1nV/√Hz max @ 100Hz Excellent current gain match: 0.5% Low offset voltage (VOS): 200 μV maximum (SOIC) Outstanding offset voltage drift: 0.03 μV/°C High gain bandwidth product: 200 MHz

Microprocessor Supervisory Circuit in 4-Lead SC70 Features: Precision power supply monitoring 31 reset threshold options: 1.58 V to 5.0 V Four reset timeouts: 1 ms, 20 ms, 140 ms, and 1120 ms Manual reset input Reset output stage Push-pull active-low Guaranteed reset output valid to VCC = 1 V Power supply glitch immunity Specified over the −40°C to +125°C temperature range 4-lead SC70 package

Microprocessor Supervisor with Backup Battery Switchover, Watchdog Feature, Power Fail Warning, 4.4V Threshold Voltage, 250mA Output Current Features: Low Power Consumption Precision Voltage Monitor ±2% Tolerance on ADM800L/M Reset Time Delay—200 ms, or Adjustable 1 µA Standby Current Automatic Battery Backup Power Switching Fast Onboard Gating of Chip Enable Signals Also Available in TSSOP Package (ADM691A)

600 mA, Ultralow Noise, High PSRR, RF Linear Regulator Features: Input voltage range: 2.3 V to 5.5 V Maximum load current: 600 mA Low noise 0.9 µV rms total integrated noise from 100 Hz to 100 kHz 1.6 µV rms total integrated noise from 10 Hz to 100 kHz Noise spectral density: 1.5 nV/√Hz from 10 kHz to 1 MHz PSRR of 90 dB from 200 Hz to 200 kHz; 58 dB at 1 MHz, VOUT = 3.3 V, VIN = 3.8 V Dropout voltage: 120 mV typical at VOUT = 3.3 V, IOUT = 600 mA Initial accuracy: ±0.5% Accuracy over line, load, and temperature: −2.0%(minimum), +1.5% (maximum), from −40°C to +85°C Quiescent current, IGND = 4 mA at no load Low shutdown current: 0.2 μA Stable with a 10 µF ceramic output capacitor Adjustable and fixed output voltage options: 1.2 V, 1.8 V, 2.5 V, 2.8 V, 3.0 V, 3.3 V (16 standard voltages between 1.2 V and 3.3 V available) 8-lead LFCSP and 8-lead SOIC packages Precision enable Supported by ADIsimPower tool

800 mA Ultralow Noise, High PSRR, RF Linear Regulator Features: Input voltage range: 4.5 V to 16 V Maximum output current: 800 mA Adjustable output from 1.5 V to 5.1 V Low noise 1.0 μV rms total integrated noise from 100 Hz to 100 kHz 1.6 μV rms total integrated noise from 10 Hz to 100 kHz Noise spectral density: 1.7 nV√Hz from 10 kHz to 1 MHz Power supply rejection ratio (PSRR) at 400 mA load >90 dB from 1 kHz to 100 kHz, VOUT = 5 V >60 dB at 1 MHz, VOUT = 5 V Dropout voltage: 0.6 V at VOUT = 5 V, 800 mA load Initial voltage accuracy: ±1% Voltage accuracy over line, load and temperature: ±2% Quiescent current (IGND): 4.3 mA at no load Low shutdown current: 0.1 μA Stable with a 10 μF ceramic output capacitor 8-lead LFCSP package and 8-lead SOIC package

Microprocessor Supervisory Circuit in 3-Lead SOT-23 & SC70, Active-High Push-Pull Output Features: Specified over Temperature Low Power Consumption (17 µA) Precision Voltage Monitor: 2.5 V, 3 V, 3.3 V, 5 V Options Reset Assertion Down to 1 V VCC 140 ms Min Power-On Reset Push-Pull RESET Output SC70 and SOT-23 Packages

Very Low Quiescent Current, 150 mA, with Output Discharge LDO Regulator Features: Very low quiescent current IQ = 590 nA with 0 µA load IQ = 890 nA with 1 µA load Maintains very low quiescent current in dropout (pass through mode): IQ_DROP = 720 nA with 0 µA load IQ_DROP = 1200 nA with 1 µA load Stable with 1 µF ± 30% ceramic input and output capacitors Maximum load current: ILOAD_MAX: 150 mA Input voltage range: 2.2 V to 5.5 V Low shutdown current: 50 nA typical Low dropout voltage: 120 mV at 150 mA load Initial output voltage accuracy: ±1% Accuracy over line, load, and temperature: ±3.5% 7 fixed output voltage options: 1.2 V to 3.3 V Adjustable output option can be set from 1.2 V to 4.2 V See data sheet for additional features

Very Low Quiescent Current, 150 mA, with Output Discharge LDO Regulator Features: Very low quiescent current IQ = 590 nA with 0 µA load IQ = 890 nA with 1 µA load Maintains very low quiescent current in dropout (pass through mode): IQ_DROP = 720 nA with 0 µA load IQ_DROP = 1200 nA with 1 µA load Stable with 1 µF ± 30% ceramic input and output capacitors Maximum load current: ILOAD_MAX: 150 mA Input voltage range: 2.2 V to 5.5 V Low shutdown current: 50 nA typical Low dropout voltage: 120 mV at 150 mA load Initial output voltage accuracy: ±1% Accuracy over line, load, and temperature: ±3.5% 7 fixed output voltage options: 1.2 V to 3.3 V Adjustable output option can be set from 1.2 V to 4.2 V See data sheet for additional features

300 mA, Low Dropout CMOS Linear Regulator Features: Maximum output current: 300 mA Input voltage range: 2.5 V to 5.5 V Light load efficient IGND = 75 μA with 100 μA load Low shutdown current: <1 μA Very low dropout voltage: 170 mV @ 300 mA load Initial accuracy: ±1% Accuracy over line, load, and temperature: ±2% 16 fixed output voltage options with tracking: 0.75 V to 3.3 V Low output noise: 40 μV rms High PSRR: 72 dB @ 1 kHz Stable with small 2.2 μF ceramic output capacitor See data sheet for additional features

ADP199 - High-Side Load Switch

High Accuracy anyCAP 100 mA Low Dropout Linear Regulator Features: High Accuracy (Over Line and Load Regulations at +25°C): ±0.8% Ultralow Dropout Voltage: 100 mV Typical @ 100 mA Requires Only CO = 0.47 µF for Stability anyCAP™ = Stable with All Types of Capacitors Current and Thermal Limiting Low Noise Dropout Detector Low Shutdown Current: 1 µA Several Fixed Voltage Options 3.0 V to 12 V Supply Range –20°C to +85°C Ambient Temperature Range Thermally Enhanced SO-8 Package Excellent Line and Load Regulations