Dual Micropower Comparator Features: Micropower 1.5µW (1 Sample/Second) Power Supply Flexibility Single Supply 2.8V to 16V Split Supply ±2.8V to ±8V Guaranteed Max Offset 0.75mV Guaranteed Max Tracking Error Between Input Pairs ± 0.1% Input Common Mode Range to Both Supply Rails TTL/CMOS Compatible with ±5V or Single 5V Supply Input Errors are Stable with Time and Temperature

Window Comparator Features: Micropower 1.5µW (1 Sample/Second) Wide Supply Range — 2.8V to 16V High Accuracy Center Error ±1mV Max Width Error ±0.15% Max Wide Input Voltage Range V+ to Ground TTL Outputs with 5V Supply Two Independent Ground-Referred Control Inputs Small Size 8-Pin MiniDIP

Switched Capacitor Voltage Converter Features: Plug-In Compatible with 7660 with These Additional Features: Guaranteed Operation to 9V, with No External Diode, Over Full Temperature Range Boost Pin (Pin 1) for Higher Switching Frequency Lower Quiescent Power Efficient Voltage Doubler 200µA Max. No Load Supply Current at 5V 97% Min. Open Circuit Voltage Conversion Efficiency 95% Min. Power Conversion Efficiency Wide Operating Supply Voltage Range, 1.5V to 9V Easy to Use Commercial Device Guaranteed Over -40°C to 85°C Temperature Range

Dual Micropower Zero-Drift Operational Amplifier with Internal Capacitors Features: No External Components Required Maximum Offset Voltage: 10µV Maximum Offset Voltage Drift: 50nV/°C Supply Current: 80µA Minimum CMRR: 110dB Minimum PSRR 110dB Single Supply Operation 4.75V to 16V Common Mode Range Includes GND Output Swings to GND Typical Overload Recovery Time 70ms Pin Compatible with Industry Standard Dual Op Amps

Zero-Drift Operational Amplifier Features: Guaranteed Max Offset: 5μV Guaranteed Max Offset Drift: 0.05μV/°C Typ Offset Drift: 0.01μV/°C Excellent Long Term Stability: 100nV/√Month Guaranteed Max Input Bias Current: 30pA Over Operating Temperature Range: Guaranteed Min Gain: 120dB Guaranteed Min CMRR: 120dB Guaranteed Min PSRR: 120dB Single Supply Operation: 4.75V to 16V (Input Voltage Range Extends to Ground) External Capacitors can be Returned to V– with No Noise Degradation

Universal Dual Filter Building Block Features: Guaranteed Filter Specification for ±2.37V and ±5V Supply Operates up to 30kHz Low Power and 88dB Dynamic Range at ±2.5V Supply Center Frequency Q Product up to 1.6MHz Guaranteed Offset Voltages Guaranteed Clock to Center Frequency Accuracy over Temperature 0.3% for LTC1060A 0.8% for LTC1060 Guaranteed Q Accuracy Over Temperature Low Temperature Coefficient of Q and Center Frequency Low Crosstalk, 70dB Clock Inputs TTL and CMOS Compatible

Low Noise, High Frequency, 8th Order Linear Phase Lowpass Filter Features: 8th Order Filter in a 14-Pin Package 95kHz Maximum Corner Frequency No External Components 75:1, 150:1, and 120:1 Clock to Cutoff Frequency Ratio 60µVRMS Total Wideband Noise 0.03% THD or Better Operates from ±2.37V to ±8V Power Supplies Low Total Output DC Offset

Low Noise, 8th Order, Clock Sweepable Cauer Lowpass Filter Features: 8th Order Filter in a 14-Pin Package 80dB or More Stopband Attenuation at 2 x fCUTOFF 50:1 fCLK to fCUTOFF Ratio (Cauer) 100:1 fCLK to f-3dB Ratio (Transitional) 135µVRMS Total Wideband Noise 0.03% THD or Better 100kHz Maximum fCUTOFF Frequency Operates up to ±8V Power Supplies Input Frequency Range up to 50 Times the Filter Cutoff Frequency

DC Accurate, Clock-Tunable Linear Phase 5th Order Bessel Lowpass Filter Features: Clock-Tunable Cutoff Frequency 1mV DC Offset (Typical) 80dB CMR (Typical) Internal or External Clock 50µVRMS Clock Feedthrough 100:1 Clock-to-Cutoff Frequency Ratio 80µVRMS Total Wideband Noise 0.004% Noise THD at 2VRMS Output Level 50kHz Maximum Cutoff Frequency Cascadable for Faster Roll-Off Operates from ±2.375 to µ8V Power Supplies Self-Clocking with 1 RC

Rail-to-Rail, Very Low Noise Universal Dual Filter Building Block Features: Rail-to-Rail Input and Output Operation Operates from a Single 3V to ±5V Supply Dual 2nd Order Filter in a 16-Lead SSOP Package >80dB Dynamic Range on Single 3.3V Supply Clock-to-Center Frequency Ratio of 100:1 for the LTC1067 and 50:1 for the LTC1067-50 Internal Sampling-to-Center Frequency Ratio of 200:1 for the LTC1067 and 100:1 for the LTC1067-50 Center Frequency Error < ±0.2% Typ Low Noise: <40µVRMS, Q ≤ 5 Customizable with Internal Resistors

Rail-to-Rail, Very Low Noise Universal Dual Filter Building Block Features: Rail-to-Rail Input and Output Operation Operates from a Single 3V to ±5V Supply Dual 2nd Order Filter in a 16-Lead SSOP Package >80dB Dynamic Range on Single 3.3V Supply Clock-to-Center Frequency Ratio of 100:1 for the LTC1067 and 50:1 for the LTC1067-50 Internal Sampling-to-Center Frequency Ratio of 200:1 for the LTC1067 and 100:1 for the LTC1067-50 Center Frequency Error < ±0.2% Typ Low Noise: <40µVRMS, Q ≤ 5 Customizable with Internal Resistors

Rail-to-Rail, Very Low Noise Universal Dual Filter Building Block Features: Rail-to-Rail Input and Output Operation Operates from a Single 3V to ±5V Supply Dual 2nd Order Filter in a 16-Lead SSOP Package >80dB Dynamic Range on Single 3.3V Supply Clock-to-Center Frequency Ratio of 100:1 for the LTC1067 and 50:1 for the LTC1067-50 Internal Sampling-to-Center Frequency Ratio of 200:1 for the LTC1067 and 100:1 for the LTC1067-50 Center Frequency Error < ±0.2% Typ Low Noise: <40µVRMS, Q ≤ 5 Customizable with Internal Resistors

Rail-to-Rail, Very Low Noise Universal Dual Filter Building Block Features: Rail-to-Rail Input and Output Operation Operates from a Single 3V to ±5V Supply Dual 2nd Order Filter in a 16-Lead SSOP Package >80dB Dynamic Range on Single 3.3V Supply Clock-to-Center Frequency Ratio of 100:1 for the LTC1067 and 50:1 for the LTC1067-50 Internal Sampling-to-Center Frequency Ratio of 200:1 for the LTC1067 and 100:1 for the LTC1067-50 Center Frequency Error < ±0.2% Typ Low Noise: <40µVRMS, Q ≤ 5 Customizable with Internal Resistors

Rail-to-Rail, Very Low Noise Universal Dual Filter Building Block Features: Rail-to-Rail Input and Output Operation Operates from a Single 3V to ±5V Supply Dual 2nd Order Filter in a 16-Lead SSOP Package >80dB Dynamic Range on Single 3.3V Supply Clock-to-Center Frequency Ratio of 100:1 for the LTC1067 and 50:1 for the LTC1067-50 Internal Sampling-to-Center Frequency Ratio of 200:1 for the LTC1067 and 100:1 for the LTC1067-50 Center Frequency Error < ±0.2% Typ Low Noise: <40µVRMS, Q ≤ 5 Customizable with Internal Resistors

Low Power, 8th Order Progressive Elliptic, Lowpass Filter Features: 8th Order Elliptic Filter in SO-8 Package Operates from Single 3.3V to ±5V Power Supplies –20dB at 1.2fCUTOFF –52dB at 1.4fCUTOFF –70dB at 2fCUTOFF Wide Dynamic Range 110μVRMS Wideband Noise 3.8mA Supply Current with ±5V Supplies 2.5mA Supply Current with Single 5V Supply 2mA Supply Current with Single 3.3V Supply

Low Power, 8th Order Progressive Elliptic, Lowpass Filter Features: 8th Order Elliptic Filter in SO-8 Package Operates from Single 3.3V to ±5V Power Supplies –20dB at 1.2fCUTOFF –52dB at 1.4fCUTOFF –70dB at 2fCUTOFF Wide Dynamic Range 110μVRMS Wideband Noise 3.8mA Supply Current with ±5V Supplies 2.5mA Supply Current with Single 5V Supply 2mA Supply Current with Single 3.3V Supply

Low Power, 8th Order Progressive Elliptic, Lowpass Filter Features: 8th Order Elliptic Filter in SO-8 Package Operates from Single 3.3V to ±5V Power Supplies –20dB at 1.2fCUTOFF –52dB at 1.4fCUTOFF –70dB at 2fCUTOFF Wide Dynamic Range 110μVRMS Wideband Noise 3.8mA Supply Current with ±5V Supplies 2.5mA Supply Current with Single 5V Supply 2mA Supply Current with Single 3.3V Supply

Low Power, 8th Order Progressive Elliptic, Lowpass Filter Features: 8th Order Elliptic Filter in SO-8 Package Operates from Single 3.3V to ±5V Power Supplies –20dB at 1.2fCUTOFF –52dB at 1.4fCUTOFF –70dB at 2fCUTOFF Wide Dynamic Range 110μVRMS Wideband Noise 3.8mA Supply Current with ±5V Supplies 2.5mA Supply Current with Single 5V Supply 2mA Supply Current with Single 3.3V Supply

Low Power, 8th Order Progressive Elliptic, Lowpass Filter Features: 8th Order Elliptic Filter in SO-8 Package Operates from Single 3.3V to ±5V Power Supplies –20dB at 1.2fCUTOFF –52dB at 1.4fCUTOFF –70dB at 2fCUTOFF Wide Dynamic Range 110μVRMS Wideband Noise 3.8mA Supply Current with ±5V Supplies 2.5mA Supply Current with Single 5V Supply 2mA Supply Current with Single 3.3V Supply

Linear Phase 8th Order Lowpass Filter Features: 8th Order, Linear Phase Filter in SO-8 Package Raised Cosine Amplitude Response -43dB Attenuation at 2x fCUTOFF Wideband Noise: 140µVRMS Operates from Single 5V Supply to ±5V Power Supplies Clock-Tunable to 200kHz with ±5V Supplies Clock-Tunable to 120kHz with Single 5V Supply