Evaluation Kits

Displaying 3041 - 3060 of 12877

Evaluation Kits

LT6552CDD LT6552CS8 | Video Line Driver and Receiver

Analog Devices Inc.

DC815A: Demo Board for the LT6552 3.3V Single Supply Video Difference Amplifier.

Evaluation Kit

DC816A-B

Analog Devices Inc.

The LTC2298/LTC2297/LTC2296 are 14-bit 65Msps/40Msps/25Msps, low power dual 3V A/D converters designed for digitizing high frequency, wide dynamic range signals. The LTC2298/LTC2297/LTC2296 are perfect for demanding imaging and communications applications with AC performance that includes 74.3dB SNR and 90dB SFDR for signals at the Nyquist frequency.DC specs include ?1.2LSB INL (typ), ?0.5LSB DNL (typ) and no missing codes over temperature. The transition noise is a low 1LSBRMS.A single 3V supply allows low power operation. A separate output supply allows the outputs to drive 0.5V to 3.6V logic. An optional multiplexer allows both channels to share a digital output bus.A single-ended CLK input controls converter operation. An optional clock duty cycle stabilizer allows high performance at full speed for a wide range of clock duty cycles.Applications Wireless and Wired Broadband Communication Imaging Systems Spectral Analysis Portable Instrumentation

Evaluation Kit

LTC2291IUP | MUX Dual ADC, VDD = +3.0V, 25Msps, 12Bit, 1MHz < AIN < 70MHz, (Requires DC718)

Analog Devices Inc.

DC816A-K: Demo Board for the LTC2291 Dual 12-Bit, 25Msps Low Power 3V ADCs.

Evaluation Kit

DC823B-B

Analog Devices Inc.

The LTM4600HV is a complete 10A, DC/DC step down power supply with up to 28V input operation. Included in the package are the switching controller, power FETs, inductor, and all support components. Operating over an input voltage range of 4.5V to 28V, the LTM4600HV supports an output voltage range of 0.6V to 5V, set by a single resistor. This high efficiency design delivers 10A continuous current (12A peak), needing no heat sinks or airflow to meet power specifications. Only bulk input and output capacitors are needed to finish the design.The low profile package (2.82mm) enables utilization of unused space on the bottom of PC boards for high density point of load regulation. High switching frequency and an adaptive on-time current mode architecture enables a very fast transient response to line and load changes without sacrificing stability. Fault protection features include integrated overvoltage and short circuit protection with a defeatable shutdown timer. A built-in soft-start timer is adjustable with a small capacitor.The LTM4600HV is packaged in a compact (15mm ? 15mm) and low profile (2.82mm) over-molded Land Grid Array (LGA) package suitable for automated assembly by standard surface mount equipment. The LTM4600HV is RoHS compliant.Applications Telecom and Networking Equipment Military and Avionics Systems Industrial Equipment Point of Load Regulation Servers

Evaluation Kit

LTC2804 RS232 Demo Board

Analog Devices Inc.

DC827A-B: Demo Board for the LTC2804 1.8V to 5.5V RS-232 Single and Dual Transceivers.

Evaluation Kit

DC828A

Analog Devices Inc.

The LTC3409 is a high efficiency, monolithic synchronous buck regulator using a constant frequency, current mode architecture. The output voltage is adjusted via an external resistor divider.Fixed switching frequencies of 1.7MHz and 2.6MHz are supported. Alternatively, an internal PLL will synchronize to an external clock in the frequency range of 1MHz to 3MHz. This range of switching frequencies allows the use of small surface mount inductors and capacitors, including ceramics.Supply current during Burst Mode operation is only 65?A dropping to

Evaluation Kit

LTC4413EDD | Dual Ideal Diode-Triple Power Path Controller, VIN = 2.5 to 5.5V, VOUT = 2.5 to 5.5V @ 2.6A MAX

Analog Devices Inc.

DC839A: Demo Board for the LTC4413 Dual 2.6A, 2.5V to 5.5V, Ideal Diodes in 3mm × 3mm DFN.

Evaluation Kit

LT5515EUF | Replaces DC555B-A; 1.9GHz Direct Conversion Demodulator

Analog Devices Inc.

DC844D: Demo Board for the LT5515 1.5GHz to 2.5GHz Direct Conversion Quadrature Demodulator.

Evaluation Kit

DC846A

Analog Devices Inc.

The LTC2446/LTC2447 4-terminal switching enables multiplexed ratiometric measurements. Four sets of selectable differential inputs coupled with four sets of differential reference inputs allow multiple RTDs, bridges and other sensors to be digitized by a single converter. A fifth differential reference input can be selected for any input channel not requiring ratiometric measurements (thermocouples, voltages, current sense, etc.). The flexible input multiplexer allows single-ended or differential inputs coupled with a slaved reference input or a universal reference input.A proprietary delta-sigma architecture results in absolute accuracy (offset, full-scale, linearity) of 15ppm, noise as low as 200nVRMS and speeds as high as 8kHz. Through a simple 4-wire interface, ten speed/resolution combinations can be selected. The first conversion following a speed, resolution, channel change or reference change is valid since there is no settling time between conversions, enabling scan rates of up to 4kHz. Additionally, a 2x mode can be selected for any speed-enabling output rates up to 8kHz with one cycle of latency.Protected by U.S. Patents, including 6140950, 6169506, 6208279, 6411242, 6639526Applications Flow Weight Scales Pressure Direct Temperature Measurement Gas Chromatography

Evaluation Kit

LTC3783 Demo Board | Boost LED Driver Controller, 3V ≤ VIN ≤ 14.4V, VLED up to 25V @ 360mA

Analog Devices Inc.

Demonstration circuit 850A is a Boost LED Driver featuring the LTC3783 a boost/SEPIC/flyback LED driver controller. The demo board requires a 3V to 14.4V input and provides 360mA LED current at up to 25V. It incorporates an output overvoltage protection feature to limit output voltage to less than 27V if the LED string is inadvertently disconnected. The LT3783 features 1000:1 PWM dimming for brightness control and analog dimming control.

Evaluation Kit

DC851A-C

Analog Devices Inc.

Evaluation Kit

LTC2299IUP | DeMUX Dual ADC, +3.0V, 80Msps, 14Bit, 70MHz < AIN < 140MHz, (Requires DC890)

Analog Devices Inc.

DC851A-F: Demo Board for the LTC2299 Dual 14-Bit, 80Msps Low Power 3V ADC.

Evaluation Kit

LTC2292IUP | DeMUX Dual ADC, +3.0V, 40Msps 12-Bit 1MHz < AIN < 70MHz, (Requires DC890)

Analog Devices Inc.

DC851A-J: Demo Board for the LTC2292 Dual 12-Bit, 40Msps Low Power 3V ADCs.

LTC2291IUP | DeMUX Dual ADC, +3.0V, 25Msps 12-Bit 1MHz < AIN < 70MHz, (Requires DC890)

Analog Devices Inc.

DC851A-K: Demo Board for the LTC2291 Dual 12-Bit, 25Msps Low Power 3V ADCs.

Evaluation Kit

LTC2288IUP | DeMUX Dual ADC, +3.0V, 65Msps 10-Bit 1MHz < AIN < 70MHz, (Requires DC890)

Analog Devices Inc.

DC851A-P: Demo Board for the LTC2288 Dual 10-Bit, 65Msps Low Noise 3V ADCs.

LTC2287IUP | DeMUX Dual ADC, +3.0V, 40Msps 10-Bit 1MHz < AIN < 70MHz, (Requires DC890)

Analog Devices Inc.

DC851A-Q: Demo Board for the LTC2287 - Dual 10-Bit, 40Msps Low Noise 3V ADCs

DC854D-G

Analog Devices Inc.

The LTC2216/LTC2215 are 80Msps/65Msps sampling 16- bit A/D converters designed for digitizing high frequency, wide dynamic range signals with input frequencies up to 400MHz. The input range of the ADC is ?xed at 2.75VP-P.The LTC2216/LTC2215 are perfect for demanding communications applications, with AC performance that includes 81.5dBFS noise ?oor and 100dB spurious free dynamic range (SFDR). Ultra low jitter of 85fsRMS allows undersampling of high input frequencies while maintaining excellent noise performance. Maximum DC specs include ?3.5LSB INL, ?1LSB DNL (no missing codes). The digital output can be either differential LVDS or single-ended CMOS. There are two format options for the CMOS outputs: a single bus running at the full data rate or demultiplexed buses running at half data rate. A separate output power supply allows the CMOS output swing to range from 0.5V to 3.6V. The ENC+ and ENC??inputs may be driven differentially or single-ended with a sine wave, PECL, LVDS, TTL or CMOS inputs. An optional clock duty cycle stabilizer allows high performance at full speed with a wide range of clock duty cycles.Applications Telecommunications Receivers Cellular Base Stations Spectrum Analysis Imaging Systems ATE

Evaluation Kit

DC860A

Analog Devices Inc.

The LTC3422 is a high efficiency, current mode, fixed frequency, step-up DC/DC converter with true output disconnect and inrush current limiting. The part is guaranteed to start up from an input voltage of 1V. The device includes a 0.20? N-channel MOSFET switch and a 0.24? P-channel MOSFET synchronous rectifier. The output voltage, switching frequency, soft-start time, Burst Mode threshold and loop compensation are all simply programmed using tiny external passive components.Quiescent current is only 25?A during Burst Mode operation, maximizing battery life in portable applications. The oscillator frequency can be programmed up to 3MHz and can be synchronized to an external clock applied to the SYNC pin.Other features include 1?A shutdown, short-circuit protection, anti-ringing control, thermal shutdown and current limit. The LTC3422 is available in a (3mm ? 3mm ? 0.75mm) 10-pin DFN package.Applications Wireless Handsets Handheld Computers GPS Receivers MP3 Players

Evaluation Kit

LTC3221EDC Demo Board | Micropower Regulated Adjustable Output Charge Pump, 1.8V ≤ VIN ≤ 3.8V, VOUT = 3V @ Up to 60mA

Analog Devices Inc.

Demonstration circuit 862 is a micropower regulated charge pump DC/DC converter featuring the 60mA output LTC3221 in a 2mm × 2mm DFN package. It comes in three assembly versions, DC862A-A, DC862A-B and DC862A-C, featuring the LTC3221EDC-3.3 (fixed 3.3V output), the LTC3221EDC-5 (fixed 5V output) , and LTC3221EDC (adjustable output set to 3V), respectively. The demo board input voltage range depends on the IC used; for the adjustable output DC862A-C, the input voltage range is 1.8V to 3.8V. The LTC3221's low 8µA no-load quiescent current is even lower than the self-discharging current of many batteries. By employing a constant current to charge the output, the output ripple is low even at high input and light load, and is fairly constant over the full input voltage range.

Evaluation Kit